Hi > > I've got a collaborator running into problems with RAT point-to-point > tests over a wireless grid network. I don't see that the 2 systems they > are using are an issue, since they are standard PCs and there are no RAT > audio problems over their regular networks. > RAT runs fine over Wireless unless there's a lot of loss - do you see loss of packets over the wireless? (check the reception quality matrix). If you're seeing loss you could try enabling rendundancy in menu->transmission. Typically a 802.11b or g or less are fine. If you;re using multicast there may be issues due to the AP - though it usually works ok on most APs unless there's alot of multicast.
Piers. > There's apparently enough latency, jitter, packet-loss over the wireless > network to cause RAT audio to cut in and out. I checked with them to > make sure that silence suppression is disabled. It is, so that isn't > contributing to the problem. > > Are there any less-obvious RAT configuration changes that may help decrease > audio breakup over this lower than spec network? No VICs are being run in > their current testing. > > Thanks. > > --fred > >
