I have pretty much the same problem. Starting up the AG causes 3 identical windows to start up on one input. Changing the input has no effect. I'd love to be able to use AG2.x with the Videum card InSors installed.
-Doug B CISE/OAD/NSF Rosario Lombardo wrote: > Just reporting my experience: > I had the problems described by Andy which were solved after > installing the driver reported below: > > - VFW drivers > ftp://64.62.227.4/drivers/Videum_3_1_Release_NT_W2K_XP.exe found on > winnov.com > - AGtk2.4 > - IG2 > > Whichever client is started first, takes over the *two* cameras > connected. > > > \\Rosario > > > > Thomas D. Uram wrote: > >> Yes you do; the AG vic does not support the use of WDM drivers, >> unfortunately. If anyone has cycles to spend on this, it'd be a big >> help to the AG community. >> >> Tom >> >> >> >> On 10/19/05 10:02 AM, A Quay wrote: >> >>> Do I have to use the VFW drivers with the Videum 4400 to transmit four >>> cameras in AG 2.4? >>> >>> Using VFW drivers instead of WDM is a problem since the same >>> computer is >>> used with our inSORS grid software. >>> >>> Andy Quay >>> University of Florida >>> >>> >>> >>
