On 14/11/2004, at 2:33 AM, West Suhanic wrote: > Hi Thomas: > > I am running my own VenueServer. It is located at, > https://example1:8000/Servers/default > In order to allow non-multicast enabled hosts access to the > VenueServer I am running a > bridge server on example1. The configuration file for the BridgeServer > is: > > [BridgeServer] > name = CLR > location = Toronto > qbexec = /usr/bin/QuickBridge > # Lobby of ag-2 server > [https://example1:8000/Venues/default] > type = Venue > # use this special port range for this venue > portMin = 24000 > portMax = 24006 > > I can successfully connect to the VenueServer and select unicast. > After selecting > unicast, a new rat and vic appear. However I never get any video or > audio. All of > my multicast VenueClients are getting video and audio from the > VenueServer. > Any suggestions as to what I am doing wrong? >
West, Just as a test, try a configuration with a much greater range between portMin & portMax e.g. portMin = 20000, portMax =30000. I think there's something amiss with port number allocations when min/max are so close. I previously tried a narrow range like yours (in order to try to generate specific, repeatable port numbers), but it didn't work as expected. Unfortunately I didn't have time to track down the problem, so left it to the bridge service to select port numbers from a wide range. chris Christoph Willing Ph: +61 7 3365 8350 QPSF Access Grid Manager University of Queensland
