I do remember that I had to manuall add one of the 2 or 3 rat programs that get run to the XP firewall exception rules. I can't remember off-hand which one, but if you're interested shoot me an email and I will go and find out.
Steve > -----Original Message----- > From: owner-ag-t...@mcs.anl.gov [mailto:owner-ag-t...@mcs.anl.gov]On > Behalf Of Ivan R. Judson > Sent: Monday, October 04, 2004 10:23 PM > To: 'David McNabb'; ag-t...@mcs.anl.gov > Subject: RE: [AG-TECH] account-specific problem on AGTk2.3/XP > > > > I'd check the XP Firewall settings first. > > --Ivan > > > -----Original Message----- > > From: owner-ag-t...@mcs.anl.gov > > [mailto:owner-ag-t...@mcs.anl.gov] On Behalf Of David McNabb > > Sent: Monday, October 04, 2004 7:30 AM > > To: ag-t...@mcs.anl.gov > > Subject: [AG-TECH] account-specific problem on AGTk2.3/XP > > > > Good morning, all! > > > > Here's a chestnut I haven't seen before. Any guesses about > > what might be going on? > > > > I had installed AGTk2.3 and associated packages on a new Dell > > dual-processor XP with Matrox D200 MM, Videum 4400, XAP400, > > etc. Everything was working swimmingly. One of the faculty > > that uses this machine installed Real Producer for streaming > > some classes from the room to a non-AG audience, and this was > > working well for him. However, I am no longer able to run > > the client "completely" when logged in as myself (also an > > admin acct.) > > > > What I see is everything working properly with one working > > RAT and one VIC per defined VideoProducer (three of these, > > since we use three cameras, usually.) Of course I still have > > to select the correct device in the menu for these > > producer-VICs for each corresponding camera, but that is > > nothing new. The problem is with the VIC that appears for > > the VideoConsumer, i.e. the VIC with non-muted thumbnails and > > labeled with the venue name. This comes up with a "waiting > > for video.." message that never goes away. > > > > If I un-mute thumbnails in one of my producer-VICs I can see > > the video stream from that camera is fine. And others in the > > venue seem to be getting my video streams just fine. > > However, I am getting neither my own video streams in my > > consumer-VIC, nor any of the streams from other sites in the > > venue that should also appear in my concumer-VIC. > > > > If I quit, log out, and log back in on the faculty member's > > account, everything works fine. > > > > At one point I de-installed RealProducer, thinking there > > might be some interference there, but if so the de-install > > did not help. I had also recently installed XP SP2 from my > > account, and had to go through the excercise whenever > > prompted of allowing connections by various AG-related SW > > bits, but I did this on another nearly identical system > > without incident. > > > > I'm stumped. Any ideas from you experts or even guesses > > would be greatly appreciated. > > > > --David > > > > David McNabb > > Project Lead, UMAGI > > UM Access Grid Initiative > > Office of Information Technology > > University of Maryland > > College Park, MD, USA > > mcn...@umd.edu > > > > >
