hi Tom. what is the proper way to incorporate those CVS .py files into AGTk? unzip the Service.zip, replace with new .py, rezip?
thanks. --fred On Wed, Sep 29, 2004 at 09:56AM, Thomas D. Uram said: > Those files are in place now. They set the Source number (0 for > vic.exe0, 1 for vic.exe1, etc.) and the Width and Height to h261 values > (352x288). > > Let me know how they work for you. > > Tom > > > Randy Groves wrote: > >Don't know about all you folks, but the two URLS come up 404 for me. Is > >this patch included in CVS? Or are these updated service files > >available somewhere else? > > > >-randy > > > >At 12:15 PM 9/24/2004, Fred Dech wrote: > > > >>oh Marcus. > >> > >>i completely forgot about this. it's important. i haven't tried these > >> patches yet because my system was working like i wanted already. > >> > >>----- Forwarded message from "Thomas D. Uram" <tu...@mcs.anl.gov> ----- > >> > >>Okay, thanks to the logs I got from the two of you, I understand the > >>problem you've run into. The videum card has four drivers that can be > >>used by vic; unfortunately, each driver can be mapped to any one of the > >>capture devices on the card, as indicated by the Source value in the > >>registry. > >> > >>The video producer service (and video service) attempt to map the > >>drivers to capture devices directly (1 to 1, 2 to 2, etc.), which gives > >>you a convenient reference (i.e., WnvVdm32.dll 1-blahblah always shows > >>you the same camera). The code was failing to map, but not fatally > >>(that's by design ;-). > >> > >>The flaw is fixed in a newer VideoProducerService.zip and > >>VideoService.zip that you can get here, if you're interested: > >> > >>http://www.mcs.anl.gov/fl/research/accessgrid/software/releases/2.3/patches/VideoProducerService.zip > >> > >> > >>http://www.mcs.anl.gov/fl/research/accessgrid/software/releases/2.3/patches/VideoService.zip > >> > >> > >> > >>To use these, you can copy these files to > >> > >>C:\Program Files\AGTk-2.3\NodeServices > >> > >>If you've set the Source values properly, you really don't need to > >>update your services. If you do try them, let me know your results. > >> > >>Thanks, > >> > >>Tom > >>----- End forwarded message ----- > > > > > > > >
