Hi Wesley, Maybe you've checked this, but often rat not starting is a symptom of no multicast available or a firewall blocking multicast.
You could try unicast only and see if it helps by: turning off audio in the menu before going to a venue, then going to a venue and switching to unicast (assuming there is a bridge available), and finally turning on audio again. If this unicast method works, then multicast connectivity is likely the problem -- although I'm not sure if that helps test firewall issues or not. Eric On Fri, 24 Sep 2004, Wesley Skoczen wrote: > This is AG 2.3 installation on Laptop Gateway M675, with Windows XP Home > edition. > AG 2.3 runs almost normally, but with one exception RAT program is not > showing up. > In Windows Task Manager rat, ratmedia and ratui are listed but RAT > window is not showing up on the desktop. > > When I run RAT for the first time after fresh restart from the command > line (i.e.: rat 224.2.211.167/16964) it opens a new window. > When I close the RAT window I can't start RAT anymore. Windows Task > Manager shows that ratmedia is running. > I cannot end this process in any way other then by restarting Windows. > In fact each time I start rat, it adds extra rat, ratmedia and ratui > processes, > I can end rat and ratui but it is not possible to end ratmedia process. > I have also installed rat-4.2.24-ipv6-win2k and it is showing the same > behavior, as version included in AG Toolkit. > > Any help will be appreciated, > Thank You > Wesley > > > Wesley Skoczen > tel. 905 845 9430 x8704 > >
