Sorry Jen, I missed to mention that port change. Cheers,
Monika On Thu, 19 Aug 2004, Jennifer Hare wrote: > Ahhh... I see. Thanks! > > -----Original Message----- > From: Thomas D. Uram [mailto:tu...@mcs.anl.gov] > Sent: Thursday, August 19, 2004 11:21 AM > To: Jennifer Hare > Cc: 'Monika Rabarison'; ag-t...@mcs.anl.gov > Subject: Re: [AG-TECH] AG 2.3 and Service Manager > > Jennifer: > > The service manager is still started by the venue client; as of 2.2, the > service manager is started on the same port as the node service, port > 11000. If you rebuild your node configuration using the service manager > on port 11000, and save this new config as your default, everything > should work automatically as it did before, the way you describe. > > The problem you're encountering occurs because you're using an old node > configuration that assumes a service manager on port 12000 which is, as > you mentioned, not running. > > Tom > > > > > Jennifer Hare wrote: > > I can add those services, but the problem is that when I run the venue > > client and go to "Manage my node", there is no service manager running. I > > need to manually start the service manager each time, add it (in the > "Manage > > my node" dialog) and then I can add those services. > > > > With my 2.1.2 pig install, this was all automatic, I could run the venue > > client and it would automatically start the service manager and add those > > services. I never had to start the service manager manually or add the > > audio/video services manually. Instead, this all seemed to get setup > during > > installation. > > > > So, did I just miss some configuration wizard during the installation of > > 2.3? Or have things changed? > > > > Thanks! > > Jen > > > > -----Original Message----- > > From: owner-ag-t...@mcs.anl.gov [mailto:owner-ag-t...@mcs.anl.gov] On > Behalf > > Of Monika Rabarison > > Sent: Wednesday, August 18, 2004 5:48 PM > > To: Jennifer Hare > > Cc: ag-t...@mcs.anl.gov > > Subject: Re: [AG-TECH] AG 2.3 and Service Manager > > > > Jen, > > > > Have you added AudioService and VideoService within > > "Manage my node"? > > > > Monika > > > > On Wed, 18 Aug 2004, Jennifer Hare wrote: > > > > > >>I just installed AG 2.3 beta on my Win XP desktop (for a PIG node). When > > > > I > > > >>run the Venue Client, and enter a venue, the vic and rat don't start. > > > > When > > > >>I checked to see what was going on, I discovered that the service manager > >>doesn't automatically start when you run the venue client. Is this > > > > normal? > > > >>Or did I mess something up? With AG 2.1.2, didn't the service manager > > > > start > > > >>automatically when you ran the venue client? > >> > >> > >> > >>Thanks, > >> > >>Jen > >> > >> > > > > > > --------------------------------------------------------------------- > > Monika Rabarison > > Systems Administrator > > Information Technology/HPCVI > > Jackson State University > > Office:(601)979-5933 > > SciVis Lab:(601)979-1061 > > JSUvisNode:(601)979-1056 > > JSUeNode:(601)979-1081 > > > > > > > > > > --------------------------------------------------------------------- Monika Rabarison Systems Administrator Information Technology/HPCVI Jackson State University Office:(601)979-5933 SciVis Lab:(601)979-1061 JSUvisNode:(601)979-1056 JSUeNode:(601)979-1081
