You're running the capture devices on windows then... I'm sorry but I can't help you there, I only have experience with the capture devices running on a Linux machine.
Good luck, André Doiron NRC - CNRC 55 Crowley Farm Moncton, New Brunswick -----Original Message----- From: Benedikt Bjarni Bogason [mailto:bene...@hi.is] Sent: August 12, 2004 3:00 PM To: Doiron, Andre Cc: ag-t...@mcs.anl.gov Subject: RE: [AG-TECH] VIC problem, not remembering which device Unfortunatly there is no option there to select cameras (not in 2.2, there is one in 2.1.2). Only thing I could configure is "port:" in which field i wrote "external-in" as that is how it is in my 2.1.2 settings (although there it is on a dropdown menu.) ... Benedikt. > Hello Benedikt, > After you add the VideoProducers (in the node manager) right click > on these entries under the Services list. And select configure. Set the > camera you would like to use. Close that window, now in the Node Manager > save the configuration so that the cameras settings are saved and loaded > next time. > > Hope this helps, > > André Doiron > > NRC - CNRC > 55 Crowley Farm > Moncton, New Brunswick > > > -----Original Message----- > From: owner-ag-t...@mcs.anl.gov [mailto:owner-ag-t...@mcs.anl.gov] On > Behalf > Of Benedikt Bjarni Bogason > Sent: August 12, 2004 1:19 PM > To: ag-t...@mcs.anl.gov > Subject: [AG-TECH] VIC problem, not remembering which device > > Hello. > > I'm trying to configure VIC. This is a room node, that has been running > AG2.1 handling 3 cameras (actually only 2 successfully, but that is > another matter). > > I've set up AG2.2 along side it, and it has worked "ok". Main problem is > that I can't make VIC understand that I have two cameras (actually 3, but > I will settle for two, as that is what the older version managed to > handle.) > > I add 3 instances of VideoProducer and one VideoConsumer. Save the > settings as default. No problem. Then I hit Menu on those VICs to assign > each one their own camera, which is no problem. But when I exit the venue, > and go to a new venue, the vics have forgotten those instructions and all > broadcast from the same camera. > > How can I configure it so they don't act so foolishly? > > Regards, > Benedikt. >
