I can telnet to port 12k on the linux box and I turned off all the iptables and ipchains. There is no firewall between the two devices, they are on the same subnet...
thanks, -aaron On Mon, 2004-05-03 at 11:14, Steve Gallo wrote: > Have you tried to telnet to port 12000 on the linux box? Did you > check your firewall settings? > > Steve > > > > -----Original Message----- > > From: owner-ag-t...@mcs.anl.gov [mailto:owner-ag-t...@mcs.anl.gov]On > > Behalf Of Aaron Lafferty > > Sent: Monday, May 03, 2004 11:01 AM > > To: ag-t...@mcs.anl.gov > > Subject: [AG-TECH] access grid newbie help > > > > > > Hi again all! > > > > Well I have the time synced up between the boxes to within 1 second of > > each other. Sadly the linux boxes absolutely do not want to use > > ntp-1.accessgrid.org but the windows box will. So they sync to the US > > Naval Observatory time standard and that works fine. > > > > However, the node manager wizard still claims it cannot connect to the > > linux boxes when I have run AGServiceManager.py running. > > > > I still think that I am obviously missing something in my setup but I > > don't know what. Is there a step by step set of documentation that > > someone can point me at which tells me what needs done for each box in > > the node? I've been looking around but haven't run into such a document > > myself. > > > > Open to ideas... > > > > Thanks, > > Aaron > >
