Mike, That's sounds like what I'd like to disable, but alsamixer shows no "Analog Loopback" for any of the sliders, all the way across...
On Apr 7, 2004, at 12:24 PM, Michael Miller wrote: > Dwight, > > I just wanted to check that you did open alsamixer and mute the > "Analog Loopback" setting. The mixer doesn't always show you all the > sliders at once. Make sure you move to the right as far as you can > go. That's where I found the loopback setting for my cirrus based > card. > > Michael Miller > NCSA > > > At 12:10 PM 4/7/2004, Dwight D.McKay wrote: >> Folks, >> >> We're experiencing a strange problem with a new room node. The audio >> machine is using a new, soundblaster live! card that seems to route >> the analog line input to the analog line output no matter what we do. >> We've tried both the RedHat 9 sounds drivers and ALSA. >> >> On an earlier model Soundblaster (128?), we needed to use emu-dspmgr >> and change the routing on the card to avoid this problem. On this >> card, the similar routing trick doesn't seem to work. >> >> Has anyone seen this and found a solution? >> >> -- >> Dwight D. McKay, Technical Architect >> Envision Center for Data Perceptualization, Office of the VP for >> IT, Purdue University >> mc...@purdue.edu / 765.494.4481 [VOICE] / 765.496.7264 [FAX] / STEW >> B31 > > Thanx, > > Michael Miller > System Engineer > Visualization Technology Support > Computing and Data Management > National Center for Supercomputing Applications > University of Illinois - UC > 217-649-0747 > > "If you're clear in your vision and trust the people in your team with > clear objectives, they will invariably do their best to achieve > everything desired, and usually deliver everything you could have > hoped for and even more." -Paul Debevec > > -- Dwight D. McKay, Technical Architect Envision Center for Data Perceptualization, Office of the VP for IT, Purdue University mc...@purdue.edu / 765.494.4481 [VOICE] / 765.496.7264 [FAX] / STEW B31
