Windows 7 does its best to make backing up your files easy. simon williams reckons there's no excuse for not organising and protecting all your valuable data. No hard disk lasts forever. Even if you've never had a drive fail on you, your first experience could be just minutes away. Back up your data now, and avoid the possibility of losing all your important files. A typical backup creates a copy of all the files that matter to you, and retains the original folder structure - when you restore from a backup you can expect to find your files in their normal places. Backups usually exclude program files, which take up a lot of space and are easily reinstalled from their installation discs. Backups can either be direct copies of each file, or an entire folder structure compressed into one huge file, with or without encryption. Windows 7 adopts the latter approach, but it's still possible to restore individual files and folders if necessary. By default, Windows 7 adds a system image to the backup - if your hard drive is beyond repair you'll be able to restore the entire system, including the operating system and program files, to a new drive. Turn off this feature if you need to save drive space. There's little point in backing up your files to the same drive that they usually reside on; if that drive fails, you'll lose both copies. We recommend using a second internal drive or an external USB drive. If you don't have a large media library, you may even be able to use a series of DVDs. The first backup can take a few hours to complete, but Windows 7 will then schedule regular backups that record only the amendments to your documents, thus making backups much faster. By default, this is done once a week; you can change the schedule to suit your needs. We demonstrate how to schedule regular backups that need very little maintenance in our first workshop. It's a good idea to have more than one partition on your hard drive, too. This is a virtual division that Windows regards as a separate drive, and can even be reformatted without affecting the remainder of the drive. We show you how to set up drive partitions using Acronis Disk Director later in this article. Create and restore from a baCkup in WindoWs 7 START Click the Windows button, enter 'backup' in the search bar, then choose 'backup and restore' to access Windows 7's built-in backup utility. now click 'set up backup' and browse to the drive on which you want to store the backup. it's best to use a usb or networked hard drive. Click next. 2 if you allow Windows to choose the files to back up, it will include everything in your default folders and on the desktop, plus a system image, from which you can restore the entire drive if necessary. select 'Let me choose' if drive space is an issue or you'd prefer to select only your most important files. Click next. 3 You can now review your settings and schedule incremental backups. select 'Change schedule' to alter the Windows 7 default plan, then change the date, time and frequency to suit your needs. note that your pC needs to be switched on for a backup to be processed. Click ok, then choose 'save settings and backup'. 4 the first backup may take a few hours to complete, particularly if you've selected large documents and a system image. However, the process runs in the background, allowing you to get on with other tasks. When the backup is complete, you'll see the same screen that appears when you choose to restore a backup. 5 Click 'restore my files'. browse for specific files or folders to restore by clicking on the corresponding button on the right. You can choose several individual files or sets of files from different parts of the backup for one restore. select the files or folders you need, then click 'add files', next. 6 the following screen enables you to restore the files to their original location or a folder that you specify. the latter option is useful if you want to look at older versions of a file without overwriting more recent copies. browse to a folder and click ok, restore. Windows will then copy the files across. Create a disk partition in aCronis disk direCtor 11.0 Home START it makes sense to create separate partitions if you're using a single hard drive for storage, allowing you to deal with storage areas separately. You'll need third-party software to do so if the disk already contains data, however; we've used acronis disk director 11.0 Home. Launch acronis and click your drive icon. 2 Click 'split volume'. a pop-up will suggest a possible partition size; accept this or use the arrows to enter your preferred partition sizes. Click ok and acronis will display how the drive will appear following the partition, with two icons. it will complete the partition only when you click 'Commit pending operations'. 3 a pending operations dialog box will offer you a final chance to cancel the partition. Click Continue if you wish to go ahead and create the new partition. the process will take a few minutes on a large drive, but acronis will update you on its progress. do not attempt to make changes during the operation or switch off the pC. 4 When the process is complete, the new partition will appear as a separate drive and will be assigned its own drive letter. disk director formats this drive with the same filing system as the original partition, allowing you to open Computer in Windows explorer and begin copying across files immediately. To unsubscribe send a message to [email protected] with the subject unsubscribe. To change your subscription to digest mode or make any other changes, please visit the list home page at http://accessindia.org.in/mailman/listinfo/accessindia_accessindia.org.in
