http://bugzilla.kernel.org/show_bug.cgi?id=6038
------- Additional Comments From [EMAIL PROTECTED] 2006-02-09 07:58 -------
so after i found out where to up the attachments... here they are^^
a short version of boot:
normal boot dmesg (2.6.13.5):
...
NFORCE-CK804: IDE controller at PCI slot 0000:00:06.0
NFORCE-CK804: chipset revision 242
NFORCE-CK804: not 100% native mode: will probe irqs later
NFORCE-CK804: BIOS didn't set cable bits correctly. Enabling workaround.
NFORCE-CK804: 0000:00:06.0 (rev f2) UDMA133 controller
ide0: BM-DMA at 0xf000-0xf007, BIOS settings: hda:DMA, hdb:DMA
ide1: BM-DMA at 0xf008-0xf00f, BIOS settings: hdc:DMA, hdd:DMA
Probing IDE interface ide0...
hda: IC35L180AVV207-1, ATA DISK drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
Probing IDE interface ide1...
hdc: ASUS CRW-4012A, ATAPI CD/DVD-ROM drive
hdd: _NEC DVD_RW ND-1300A, ATAPI CD/DVD-ROM drive
ide1 at 0x170-0x177,0x376 on irq 15
PDC20265: IDE controller at PCI slot 0000:05:08.0
ACPI: PCI Interrupt Link [APC3] enabled at IRQ 18
ACPI: PCI Interrupt 0000:05:08.0[A] -> Link [APC3] -> GSI 18 (level,
low) -> IRQ 18
PDC20265: chipset revision 2
PDC20265: ROM enabled at 0x60000000
PDC20265: 100% native mode on irq 18
PDC20265: (U)DMA Burst Bit DISABLED Primary PCI Mode Secondary PCI Mode.
PDC20265: FORCING BURST BIT 0x00->0x01 ACTIVE
ide2: BM-DMA at 0x9400-0x9407, BIOS settings: hde:pio, hdf:pio
ide3: BM-DMA at 0x9408-0x940f, BIOS settings: hdg:pio, hdh:pio
Probing IDE interface ide2...
hde: ST380021A, ATA DISK drive
ide2 at 0x8400-0x8407,0x8802 on irq 18
Probing IDE interface ide3...
hda: max request size: 1024KiB
hda: 361882080 sectors (185283 MB) w/7965KiB Cache, CHS=22526/255/63,
UDMA(100)
hda: cache flushes supported
hda: hda1 < hda5 hda6 hda7 hda8 >
...
boot dmesg from 2.6.16-rc2-mm1:
NFORCE-CK804: IDE controller at PCI slot 0000:00:06.0
NFORCE-CK804: chipset revision 242
NFORCE-CK804: not 100% native mode: will probe irqs later
NFORCE-CK804: BIOS didn't set cable bits correctly. Enabling workaround.
NFORCE-CK804: 0000:00:06.0 (rev f2) UDMA133 controller
ide0: BM-DMA at 0xf000-0xf007, BIOS settings: hda:DMA, hdb:DMA
NFORCE-CK804: simplex device: DMA disabled
ide1: NFORCE-CK804 Bus-Master DMA disabled (BIOS)
hda: IC35L180AVV207-1, ATA DISK drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
hdc: ASUS CRW-4012A, ATAPI CD/DVD-ROM drive
hdd: _NEC DVD_RW ND-1300A, ATAPI CD/DVD-ROM drive
ide1 at 0x170-0x177,0x376 on irq 15
PDC20265: IDE controller at PCI slot 0000:05:08.0
ACPI: PCI Interrupt Link [APC3] BIOS reported IRQ 5, using IRQ 18
ACPI: PCI Interrupt Link [APC3] enabled at IRQ 18
GSI 16 sharing vector 0xB1 and IRQ 16
ACPI: PCI Interrupt 0000:05:08.0[A] -> Link [APC3] -> GSI 18 (level,
low) -> IRQ 16
PDC20265: chipset revision 2
PDC20265: 100% native mode on irq 16
PDC20265: port 0x01f0 already claimed by ide0
PDC20265: port 0x0170 already claimed by ide1
PDC20265: neither IDE port enabled (BIOS)
hda: max request size: 512KiB
hda: 361882080 sectors (185283 MB) w/7965KiB Cache, CHS=22526/255/63,
UDMA(100)
hda: cache flushes supported
hda: <4>hda: dma_timer_expiry: dma status == 0xff
hda: dma_timer_expiry: dma status == 0xff
hda: dma_timer_expiry: dma status == 0xff
...
... and so on, never ending...
------- You are receiving this mail because: -------
You are the assignee for the bug, or are watching the assignee.
-------------------------------------------------------
This SF.net email is sponsored by: Splunk Inc. Do you grep through log files
for problems? Stop! Download the new AJAX search engine that makes
searching your log files as easy as surfing the web. DOWNLOAD SPLUNK!
http://sel.as-us.falkag.net/sel?cmd=lnk&kid=103432&bid=230486&dat=121642
_______________________________________________
acpi-bugzilla mailing list
acpi-bugzilla@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/acpi-bugzilla
