http://bugzilla.kernel.org/show_bug.cgi?id=6138
Summary: 8139too stops working aster ~5 minutes - NETDEV
WATCHDOG: eth0: transmit timed out
Kernel Version: 2.6.14-gentoo-r7
Status: NEW
Severity: normal
Owner: [EMAIL PROTECTED]
Submitter: [EMAIL PROTECTED]
[1.] One line summary of the problem:
Network card stops working after <5minutes
[2.] Full description of the problem/report:
i have an asus a6r-b002 notebook and i have problems witch network card.
when a compile kernel witch ACPI support my network card stops working after <5
minutes.
when i either pass kernel parameter "acpi=off" or don't compile acpi support at
all it's ok - network
works fine, but since i'm a notebook user i'd ilke to have acpi support.
it doesnt matter if i have network card compiled as module (8139too) or with
any of
options for 8139too module
moreover i have to have
[*] Local APIC support on uniprocessors
[*] IO-APIC support on uniprocessors
or else i get something like that:
"hdc: lost interrupt" and my computer(kernel during bootup) keeps printing
"hdc: lost interrupt"
[3.] Keywords (i.e., modules, networking, kernel):
kernel, interrupts, networking
[4.] Kernel version (from /proc/version):
Linux version 2.6.14-gentoo-r7 (gcc version 3.4.4 (Gentoo 3.4.4-r1,
ssp-3.4.4-1.0, pie-8.7.8))
[5.] Environment
[5.1.] Software (add the output of the ver_linux script here)
ver_linux:
Linux odyn 2.6.14-gentoo-r7 #2 Mon Feb 27 02:55:14 CET 2006 i686 Intel(R)
Celeron(R) M
processor 1.60GHz GenuineIntel GNU/Linux
Gnu C 3.4.4
Gnu make 3.80
binutils 2.16.1
util-linux 2.12r
mount 2.12r
module-init-tools 3.2.1
e2fsprogs 1.38
reiserfsprogs line
reiser4progs line
xfsprogs 2.7.3
Linux C Library 2.3.5
Dynamic linker (ldd) 2.3.5
Procps 3.2.5
Net-tools 1.60
Kbd 1.12
Sh-utils 5.2.1
udev 079
Modules Loaded fglrx
[5.2.] Processor information (from /proc/cpuinfo):
cat /proc/cpuinfo
processor : 0
vendor_id : GenuineIntel
cpu family : 6
model : 13
model name : Intel(R) Celeron(R) M processor 1.60GHz
stepping : 8
cpu MHz : 1600.230
cache size : 1024 KB
fdiv_bug : no
hlt_bug : no
f00f_bug : no
coma_bug : no
fpu : yes
fpu_exception : yes
cpuid level : 2
wp : yes
flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov
pat clflush dts acpi
mmx fxsr sse sse2 ss tm pbe nx
bogomips : 3207.26
[5.3.] Module information (from /proc/modules):
cat /proc/modules
fglrx 451660 7 - Live 0xf8fcb000
[5.4.] Loaded driver and hardware information (/proc/ioports, /proc/iomem)
cat /proc/ioports
0000-001f : dma1
0020-0021 : pic1
0040-0043 : timer0
0050-0053 : timer1
0060-006f : keyboard
0080-008f : dma page reg
00a0-00a1 : pic2
00c0-00df : dma2
00f0-00ff : fpu
0170-0177 : ide1
01f0-01f7 : ide0
0376-0376 : ide1
03c0-03df : vga+
03c0-03df : vesafb
03f6-03f6 : ide0
0800-0803 : PM1a_EVT_BLK
0804-0805 : PM1a_CNT_BLK
0808-080b : PM_TMR
0810-0815 : ACPI CPU throttle
0820-0827 : GPE0_BLK
0a00-0a0f : pnp 00:05
0b00-0b0f : 0000:00:14.0
4000-4004 : motherboard
4000-4000 : PM2_CNT_BLK
4005-40ff : motherboard
d000-dfff : PCI Bus #01
d800-d8ff : 0000:01:05.0
e000-efff : PCI Bus #02
e800-e8ff : 0000:02:00.0
e800-e8ff : 8139too
ff00-ff0f : 0000:00:14.1
ff00-ff07 : ide0
ff08-ff0f : ide1
cat /proc/iomem
00000000-0009fbff : System RAM
0009fc00-0009ffff : reserved
000a0000-000bffff : Video RAM area
000c0000-000ccfff : Video ROM
000f0000-000fffff : System ROM
00100000-37fcffff : System RAM
00100000-003aebc5 : Kernel code
003aebc6-00461e9f : Kernel data
37fd0000-37fddfff : ACPI Tables
37fde000-37ffffff : ACPI Non-volatile Storage
40000000-400003ff : 0000:00:14.0
bff00000-dfefffff : PCI Bus #01
c0000000-cfffffff : 0000:01:05.0
c0000000-c7ffffff : vesafb
fe900000-fe9fffff : PCI Bus #01
fe9c0000-fe9dffff : 0000:01:05.0
fe9f0000-fe9fffff : 0000:01:05.0
fea00000-feafffff : PCI Bus #02
feafc000-feafdfff : 0000:02:03.0
feaffc00-feaffcff : 0000:02:00.0
feaffc00-feaffcff : 8139too
febfc800-febfc8ff : 0000:00:14.6
febfc800-febfc8ff : ATI IXP MC97
febfcc00-febfccff : 0000:00:14.5
febfcc00-febfccff : ATI IXP AC97
febfd000-febfdfff : 0000:00:13.2
febfd000-febfdfff : ehci_hcd
febfe000-febfefff : 0000:00:13.1
febfe000-febfefff : ohci_hcd
febff000-febfffff : 0000:00:13.0
febff000-febfffff : ohci_hcd
fee00000-fee00fff : reserved
ffb80000-ffffffff : reserved
[5.5.] PCI information ('lspci -vvv' as root)
00:00.0 Host bridge: ATI Technologies Inc Unknown device 5a31 (rev 01)
Subsystem: ATI Technologies Inc Unknown device 5a31
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2
B-
Status: Cap- 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort+ >
SERR- <PERR-
Latency: 64
Region 3: Memory at <ignored> (64-bit, non-prefetchable)
00:01.0 PCI bridge: ATI Technologies Inc RS480 PCI Bridge (prog-if 00 [Normal
decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+
FastB2B-
Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >
SERR- <PERR-
Latency: 64
Bus: primary=00, secondary=01, subordinate=01, sec-latency=64
I/O behind bridge: 0000d000-0000dfff
Memory behind bridge: fe900000-fe9fffff
Prefetchable memory behind bridge: bff00000-dfefffff
Secondary status: 66MHz+ FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- <
SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA+ MAbort- >Reset- FastB2B-
Capabilities: [b0] #0d [0000]
00:13.0 USB Controller: ATI Technologies Inc IXP SB400 USB Host Controller
(prog-if 10 [OHCI])
Subsystem: ASUSTeK Computer Inc. Unknown device 1187
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr-
Stepping- SERR+
FastB2B-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >
SERR- <PERR-
Latency: 64, Cache Line Size 10
Interrupt: pin A routed to IRQ 193
Region 0: Memory at febff000 (32-bit, non-prefetchable) [size=4K]
Capabilities: [d0] Message Signalled Interrupts: 64bit- Queue=0/0
Enable-
Address: 00000000 Data: 0000
00:13.1 USB Controller: ATI Technologies Inc IXP SB400 USB Host Controller
(prog-if 10 [OHCI])
Subsystem: ASUSTeK Computer Inc. Unknown device 1187
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr-
Stepping- SERR+
FastB2B-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >
SERR- <PERR-
Latency: 64, Cache Line Size 10
Interrupt: pin A routed to IRQ 193
Region 0: Memory at febfe000 (32-bit, non-prefetchable) [size=4K]
Capabilities: [d0] Message Signalled Interrupts: 64bit- Queue=0/0
Enable-
Address: 00000000 Data: 0000
00:13.2 USB Controller: ATI Technologies Inc IXP SB400 USB2 Host Controller
(prog-if 20 [EHCI])
Subsystem: ASUSTeK Computer Inc. Unknown device 1187
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr-
Stepping- SERR+
FastB2B-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >
SERR- <PERR-
Latency: 64, Cache Line Size 10
Interrupt: pin A routed to IRQ 193
Region 0: Memory at febfd000 (32-bit, non-prefetchable) [size=4K]
Capabilities: [dc] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA
PME(D0+,D1+,D2+,D3hot+,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Bridge: PM- B3+
Capabilities: [d0] Message Signalled Interrupts: 64bit- Queue=0/0
Enable-
Address: 00000000 Data: 0000
00:14.0 SMBus: ATI Technologies Inc IXP SB400 SMBus Controller (rev 11)
Subsystem: ASUSTeK Computer Inc. Unknown device 1187
Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2
B-
Status: Cap- 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR
- <PERR-
Region 0: I/O ports at 0b00 [size=16]
Region 1: Memory at 40000000 (32-bit, non-prefetchable) [size=1K]
00:14.1 IDE interface: ATI Technologies Inc Standard Dual Channel PCI IDE
Controller ATI (prog-if 8a
[Master SecP PriP])
Subsystem: ASUSTeK Computer Inc. Unknown device 1187
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2
B-
Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >
SERR- <PERR-
Latency: 0
Interrupt: pin A routed to IRQ 185
Region 0: I/O ports at <ignored>
Region 1: I/O ports at <ignored>
Region 2: I/O ports at <ignored>
Region 3: I/O ports at <ignored>
Region 4: I/O ports at ff00 [size=16]
Capabilities: [70] Message Signalled Interrupts: 64bit- Queue=0/0
Enable-
Address: 00000000 Data: 0000
00:14.3 ISA bridge: ATI Technologies Inc IXP SB400 PCI-ISA Bridge
Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- ParErr-
Stepping- SERR+
FastB2B-
Status: Cap- 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR
- <PERR-
Latency: 0
00:14.4 PCI bridge: ATI Technologies Inc IXP SB400 PCI-PCI Bridge (prog-if 01
[Subtractive decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+
FastB2B-
Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >
SERR- <PERR-
Latency: 64
Bus: primary=00, secondary=02, subordinate=02, sec-latency=64
I/O behind bridge: 0000e000-0000efff
Memory behind bridge: fea00000-feafffff
Prefetchable memory behind bridge: fff00000-000fffff
Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort+ <
SERR- <PERR-
BridgeCtl: Parity+ SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
00:14.5 Multimedia audio controller: ATI Technologies Inc IXP SB400 AC'97 Audio
Controller (rev 02)
Subsystem: ASUSTeK Computer Inc. Unknown device 1183
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr-
Stepping- SERR+
FastB2B-
Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=slow >TAbort- <TAbort-
<MAbort- >SERR- <
PERR-
Latency: 64 (500ns min), Cache Line Size 10
Interrupt: pin B routed to IRQ 201
Region 0: Memory at febfcc00 (32-bit, non-prefetchable) [size=256]
Capabilities: [40] Message Signalled Interrupts: 64bit- Queue=0/0
Enable-
Address: 00000000 Data: 0000
00:14.6 Modem: ATI Technologies Inc ATI SB400 - AC'97 Modem Controller (rev 02)
(prog-if 00 [
Generic])
Subsystem: ASUSTeK Computer Inc. Unknown device 1186
Interrupt: pin B routed to IRQ 201
Region 0: Memory at febfcc00 (32-bit, non-prefetchable) [size=256]
Capabilities: [40] Message Signalled Interrupts: 64bit- Queue=0/0
Enable-
Address: 00000000 Data: 0000
00:14.6 Modem: ATI Technologies Inc ATI SB400 - AC'97 Modem Controller (rev 02)
(prog-if 00 [
Generic])
Subsystem: ASUSTeK Computer Inc. Unknown device 1186
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr-
Stepping- SERR+
FastB2B-
Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=slow >TAbort- <TAbort-
<MAbort- >SERR- <
PERR-
Latency: 64 (500ns min), Cache Line Size 10
Interrupt: pin B routed to IRQ 201
Region 0: Memory at febfc800 (32-bit, non-prefetchable) [size=256]
Capabilities: [40] Message Signalled Interrupts: 64bit- Queue=0/0
Enable-
Address: 00000000 Data: 0000
01:05.0 VGA compatible controller: ATI Technologies Inc RC410 [Radeon Xpress
200M] (prog-if 00
[VGA])
Subsystem: ASUSTeK Computer Inc. Unknown device 1182
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+
FastB2B-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >
SERR- <PERR-
Latency: 255 (2000ns min), Cache Line Size 10
Interrupt: pin A routed to IRQ 201
Region 0: Memory at c0000000 (32-bit, prefetchable) [size=256M]
Region 1: I/O ports at d800 [size=256]
Region 2: Memory at fe9f0000 (32-bit, non-prefetchable) [size=64K]
Expansion ROM at fe9c0000 [disabled] [size=128K]
Capabilities: [50] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA
PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [80] Message Signalled Interrupts: 64bit- Queue=0/0
Enable-
Address: 00000000 Data: 0000
02:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd.
RTL-8139/8139C/8139C+ (rev 10)
Subsystem: ASUSTeK Computer Inc. Unknown device 1045
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+
FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >
SERR- <PERR-
Latency: 64 (8000ns min, 16000ns max)
Interrupt: pin A routed to IRQ 177
Region 0: I/O ports at e800 [size=256]
Region 1: Memory at feaffc00 (32-bit, non-prefetchable) [size=256]
Capabilities: [50] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=375mA
PME(D0-,D1+,D2+,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
02:03.0 Network controller: Broadcom Corporation BCM4318 [AirForce One 54g]
802.11g Wireless
LAN Controller (rev 02)
Subsystem: ASUSTeK Computer Inc. Unknown device 120f
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB
2B-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <
PERR-
Latency: 64
Interrupt: pin A routed to IRQ 3
Region 0: Memory at feafc000 (32-bit, non-prefetchable) [size=8K]
[5.6.] SCSI information (from /proc/scsi/scsi)
no scsi support
[5.7.] Other information that might be relevant to the problem
(please look in /proc and include all information that you
think to be relevant):
cat /proc/interrupts
CPU0
0: 225043 IO-APIC-edge timer
1: 1156 IO-APIC-edge i8042
12: 3582 IO-APIC-edge i8042
14: 9772 IO-APIC-edge ide0
15: 26 IO-APIC-edge ide1
169: 1 IO-APIC-level acpi
177: 87091 IO-APIC-level eth0
193: 20773 IO-APIC-level ehci_hcd:usb1, ohci_hcd:usb2, ohci_hcd:usb3
201: 52117 IO-APIC-level ATI IXP, ATI IXP Modem, fglrx
NMI: 0
LOC: 224986
ERR: 0
MIS: 0
cat /proc/interrupts (acpi=off kernel parameter - network works)
CPU0
0: 108297 XT-PIC timer
1: 425 XT-PIC i8042
2: 0 XT-PIC cascade
5: 51452 XT-PIC eth0
10: 40710 XT-PIC ATI IXP, ATI IXP Modem, fglrx
11: 8229 XT-PIC ehci_hcd:usb1, ohci_hcd:usb2, ohci_hcd:usb3
12: 1836 XT-PIC i8042
14: 7668 XT-PIC ide0
15: 26 XT-PIC ide1
NMI: 0
LOC: 108261
ERR: 0
MIS: 0
cat /proc/pci
PCI devices found:
Bus 0, device 0, function 0:
Class 0600: PCI device 1002:5a31 (rev 1).
Master Capable. Latency=64.
Non-prefetchable 64 bit memory at 0x0 [0x1fffffff].
Bus 0, device 1, function 0:
Class 0604: PCI device 1002:5a3f (rev 0).
Master Capable. Latency=64. Min Gnt=10.
Bus 0, device 19, function 0:
Class 0c03: PCI device 1002:4374 (rev 0).
IRQ 193.
Master Capable. Latency=64.
Non-prefetchable 32 bit memory at 0xfebff000 [0xfebfffff].
Bus 0, device 19, function 1:
Class 0c03: PCI device 1002:4375 (rev 0).
IRQ 193.
Master Capable. Latency=64.
Non-prefetchable 32 bit memory at 0xfebfe000 [0xfebfefff].
Bus 0, device 19, function 2:
Class 0c03: PCI device 1002:4373 (rev 0).
IRQ 193.
Master Capable. Latency=64.
Non-prefetchable 32 bit memory at 0xfebfd000 [0xfebfdfff].
Bus 0, device 20, function 0:
Class 0c05: PCI device 1002:4372 (rev 17).
I/O at 0xb00 [0xb0f].
Non-prefetchable 32 bit memory at 0x40000000 [0x400003ff].
Bus 0, device 20, function 1:
Class 0101: PCI device 1002:4376 (rev 0).
IRQ 185.
I/O at 0xff00 [0xff0f].
Bus 0, device 20, function 3:
Class 0601: PCI device 1002:4377 (rev 0).
Bus 0, device 20, function 4:
Class 0604: PCI device 1002:4371 (rev 0).
Master Capable. Latency=64. Min Gnt=3.
Bus 0, device 20, function 5:
Class 0401: PCI device 1002:4370 (rev 2).
IRQ 201.
Master Capable. Latency=64. Min Gnt=2.
Non-prefetchable 32 bit memory at 0xfebfcc00 [0xfebfccff].
Bus 0, device 20, function 6:
Class 0703: PCI device 1002:4378 (rev 2).
IRQ 201.
Master Capable. Latency=64. Min Gnt=2.
Non-prefetchable 32 bit memory at 0xfebfc800 [0xfebfc8ff].
Bus 1, device 5, function 0:
Class 0300: PCI device 1002:5a62 (rev 0).
IRQ 201.
Master Capable. Latency=255. Min Gnt=8.
Prefetchable 32 bit memory at 0xc0000000 [0xcfffffff].
Bus 0, device 19, function 1:
Class 0c03: PCI device 1002:4375 (rev 0).
IRQ 193.
Master Capable. Latency=64.
Non-prefetchable 32 bit memory at 0xfebfe000 [0xfebfefff].
Bus 0, device 19, function 2:
Class 0c03: PCI device 1002:4373 (rev 0).
IRQ 193.
Master Capable. Latency=64.
Non-prefetchable 32 bit memory at 0xfebfd000 [0xfebfdfff].
Bus 0, device 20, function 0:
Class 0c05: PCI device 1002:4372 (rev 17).
I/O at 0xb00 [0xb0f].
Non-prefetchable 32 bit memory at 0x40000000 [0x400003ff].
Bus 0, device 20, function 1:
Class 0101: PCI device 1002:4376 (rev 0).
IRQ 185.
I/O at 0xff00 [0xff0f].
Bus 0, device 20, function 3:
Class 0601: PCI device 1002:4377 (rev 0).
Bus 0, device 20, function 4:
Class 0604: PCI device 1002:4371 (rev 0).
Master Capable. Latency=64. Min Gnt=3.
Bus 0, device 20, function 5:
Class 0401: PCI device 1002:4370 (rev 2).
IRQ 201.
Master Capable. Latency=64. Min Gnt=2.
Non-prefetchable 32 bit memory at 0xfebfcc00 [0xfebfccff].
Bus 0, device 20, function 6:
Class 0703: PCI device 1002:4378 (rev 2).
IRQ 201.
Master Capable. Latency=64. Min Gnt=2.
Non-prefetchable 32 bit memory at 0xfebfc800 [0xfebfc8ff].
Bus 1, device 5, function 0:
Class 0300: PCI device 1002:5a62 (rev 0).
IRQ 201.
Master Capable. Latency=255. Min Gnt=8.
Prefetchable 32 bit memory at 0xc0000000 [0xcfffffff].
I/O at 0xd800 [0xd8ff].
Non-prefetchable 32 bit memory at 0xfe9f0000 [0xfe9fffff].
Bus 2, device 0, function 0:
Class 0200: PCI device 10ec:8139 (rev 16).
IRQ 177.
Master Capable. Latency=64. Min Gnt=32.Max Lat=64.
I/O at 0xe800 [0xe8ff].
Non-prefetchable 32 bit memory at 0xfeaffc00 [0xfeaffcff].
Bus 2, device 3, function 0:
Class 0280: PCI device 14e4:4318 (rev 2).
IRQ 3.
Master Capable. Latency=64.
Non-prefetchable 32 bit memory at 0xfeafc000 [0xfeafdfff].
dmesg | less
Linux version 2.6.14-gentoo-r7 ([EMAIL PROTECTED]) (gcc version 3.4.4 (Gentoo
3.4.4-r1, ssp-3.4.4-1.0, pie-8.
7.8)) #2 Mon Feb 27 02:55:14 CET 2006
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 0000000037fd0000 (usable)
BIOS-e820: 0000000037fd0000 - 0000000037fde000 (ACPI data)
BIOS-e820: 0000000037fde000 - 0000000038000000 (ACPI NVS)
BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
BIOS-e820: 00000000ffb80000 - 0000000100000000 (reserved)
0MB HIGHMEM available.
895MB LOWMEM available.
On node 0 totalpages: 229328
DMA zone: 4096 pages, LIFO batch:1
Normal zone: 225232 pages, LIFO batch:31
HighMem zone: 0 pages, LIFO batch:1
DMI 2.3 present.
ACPI: RSDP (v000 ACPIAM ) @ 0x000f85d0
ACPI: RSDT (v001 A M I OEMRSDT 0x02000606 MSFT 0x00000097) @ 0x37fd0000
ACPI: FADT (v002 A M I OEMFACP 0x02000606 MSFT 0x00000097) @ 0x37fd0200
ACPI: MADT (v001 A M I OEMAPIC 0x02000606 MSFT 0x00000097) @ 0x37fd0390
ACPI: MCFG (v001 A M I OEMMCFG 0x02000606 MSFT 0x00000097) @ 0x37fd03f0
ACPI: BOOT (v001 A M I OEMBOOT 0x02000606 MSFT 0x00000097) @ 0x37fd0430
ACPI: OEMB (v001 A M I AMI_OEM 0x02000606 MSFT 0x00000097) @ 0x37fde040
ACPI: SSDT (v001 AMI CPU_CST 0x00000001 INTL 0x02002026) @ 0x37fd6d00
ACPI: DSDT (v001 AMJG_ AMJG_B32 0x00000b32 INTL 0x02002026) @ 0x00000000
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
Processor #0 6:13 APIC version 20
ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 1, version 33, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 21 low level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
Enabling APIC mode: Flat. Using 1 I/O APICs
Using ACPI (MADT) for SMP configuration information
Allocating PCI resources starting at 40000000 (gap: 38000000:c6e00000)
Built 1 zonelists
Kernel command line: root=/dev/hda2 video=vesafb:ywrap,mtrr vga=0x305
mapped APIC to ffffd000 (fee00000)
mapped IOAPIC to ffffc000 (fec00000)
Initializing CPU#0
PID hash table entries: 4096 (order: 12, 65536 bytes)
Detected 1600.535 MHz processor.
Using tsc for high-res timesource
Console: colour VGA+ 80x25
Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
Memory: 904888k/917312k available (2746k kernel code, 11904k reserved, 716k
data, 184k init, 0k
highmem)
Checking if this processor honours the WP bit even in supervisor mode... Ok.
Calibrating delay using timer specific routine.. 3207.19 BogoMIPS (lpj=6414391)
Mount-cache hash table entries: 512
CPU: After generic identify, caps: afe9fbff 00100000 00000000 00000000 00000000
00000000
00000000
CPU: After vendor identify, caps: afe9fbff 00100000 00000000 00000000 00000000
00000000
00000000
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 1024K
CPU: After all inits, caps: afe9fbff 00100000 00000000 00000040 00000000
00000000 00000000
mtrr: v2.0 (20020519)
CPU: Intel(R) Celeron(R) M processor 1.60GHz stepping 08
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Checking 'hlt' instruction... OK.
ENABLING IO-APIC IRQs
..TIMER: vector=0x31 pin1=2 pin2=-1
NET: Registered protocol family 16
ACPI: bus type pci registered
PCI: PCI BIOS revision 3.00 entry at 0xf0031, last bus=2
PCI: Using MMCONFIG
ACPI: Subsystem revision 20050902
ACPI: Interpreter enabled
ACPI: Using IOAPIC for interrupt routing
ACPI: PCI Root Bridge [PCI0] (0000:00)
PCI: Probing PCI hardware (bus 00)
PCI: Ignoring BAR0-3 of IDE controller 0000:00:14.1
Boot video device is 0000:01:05.0
PCI: Transparent bridge - 0000:00:14.4
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT]
ACPI: Embedded Controller [EC0] (gpe 24)
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P9._PRT]
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 7 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 7 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 7 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 7 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 7 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKF] (IRQs 9) *0, disabled.
ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 7 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 7 10 11 12 14 15) *0, disabled.
ACPI: Power Resource [GFAN] (off)
Linux Plug and Play Support v0.97 (c) Adam Belay
pnp: PnP ACPI init
pnp: PnP ACPI: found 12 devices
SCSI subsystem initialized
usbcore: registered new driver usbfs
usbcore: registered new driver hub
PCI: Using ACPI for IRQ routing
PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report
PCI: Cannot allocate resource region 3 of device 0000:00:00.0
pnp: 00:05: ioport range 0xa00-0xa0f has been reserved
PCI: Bridge: 0000:00:01.0
IO window: d000-dfff
MEM window: fe900000-fe9fffff
PREFETCH window: bff00000-dfefffff
PCI: Bridge: 0000:00:14.4
IO window: e000-efff
MEM window: fea00000-feafffff
PREFETCH window: disabled.
Simple Boot Flag at 0xff set to 0x1
audit: initializing netlink socket (disabled)
audit(1141058437.876:1): initialized
SGI XFS with no debug enabled
Initializing Cryptographic API
Linux agpgart interface v0.101 (c) Dave Jones
vesafb: unrecognized option mtrr
vesafb: ATI Technologies Inc., MS4 , 01.00 (OEM: ATI RADEON XPRESS 200M Series)
vesafb: VBE version: 2.0
vesafb: protected mode interface info at c000:5214
vesafb: pmi: set display start = c00c5282, set palette = c00c52bc
vesafb: pmi: ports = d810 d816 d854 d838 d83c d85c d800 d804 d8b0 d8b2 d8b4
vesafb: no monitor limits have been set
vesafb: scrolling: ywrap using protected mode interface, yres_virtual=6144
Console: switching to colour frame buffer device 128x48
vesafb: framebuffer at 0xc0000000, mapped to 0xf8880000, using 6144k, total
131072k
fb0: VESA VGA frame buffer device
ACPI: AC Adapter [AC0] (on-line)
ACPI: Battery Slot [BAT0] (battery present)
ACPI: Power Button (FF) [PWRF]
ACPI: Lid Switch [LID]
ACPI: Sleep Button (CM) [SLPB]
ACPI: Power Button (CM) [PWRB]
ACPI: Fan [FN00] (off)
ACPI: Video Device [VGA] (multi-head: yes rom: no post: no)
ACPI: CPU0 (power states: C1[C1] C2[C2])
ACPI: Processor [CPU1] (supports 8 throttling states)
ACPI: Thermal Zone [THRM] (54 C)
Asus Laptop ACPI Extras version 0.29
BSTS called, 0x7f returned
unsupported, trying default values, supply the developers with your DSDT
PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12
i8042.c: Detected active multiplexing controller, rev 1.1.
serio: i8042 AUX0 port at 0x60,0x64 irq 12
serio: i8042 AUX1 port at 0x60,0x64 irq 12
serio: i8042 AUX2 port at 0x60,0x64 irq 12
serio: i8042 AUX3 port at 0x60,0x64 irq 12
serio: i8042 KBD port at 0x60,0x64 irq 1
mice: PS/2 mouse device common for all mice
io scheduler noop registered
io scheduler cfq registered
8139too Fast Ethernet driver 0.9.27
ACPI: PCI Interrupt 0000:02:00.0[A] -> GSI 20 (level, low) -> IRQ 177
eth0: RealTek RTL8139 at 0xf881ec00, 00:15:f2:84:4e:ec, IRQ 177
eth0: Identified 8139 chip type 'RTL-8100B/8139D'
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
ATIIXP: IDE controller at PCI slot 0000:00:14.1
ACPI: PCI Interrupt 0000:00:14.1[A] -> GSI 16 (level, low) -> IRQ 185
ATIIXP: chipset revision 0
ATIIXP: not 100% native mode: will probe irqs later
ide0: BM-DMA at 0xff00-0xff07, BIOS settings: hda:DMA, hdb:pio
ide1: BM-DMA at 0xff08-0xff0f, BIOS settings: hdc:DMA, hdd:pio
Probing IDE interface ide0...
input: AT Translated Set 2 keyboard on isa0060/serio0
hda: HTS541060G9AT00, ATA DISK drive
Synaptics Touchpad, model: 1, fw: 6.1, id: 0xa3a0b3, caps: 0xa04713/0x10008
input: SynPS/2 Synaptics TouchPad on isa0060/serio4
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
Probing IDE interface ide1...
hdc: TSSTcorpCD/DVDW TS-L532U, ATAPI CD/DVD-ROM drive
ide1 at 0x170-0x177,0x376 on irq 15
hda: max request size: 1024KiB
hda: 117210240 sectors (60011 MB) w/7539KiB Cache, CHS=16383/255/63, UDMA(100)
hda: cache flushes supported
hda: hda1 hda2 hda3 < hda5 > hda4
hdc: ATAPI 24X DVD-ROM DVD-R CD-R/RW drive, 2048kB Cache, UDMA(33)
Uniform CD-ROM driver Revision: 3.20
ACPI: PCI Interrupt 0000:00:13.2[A] -> GSI 19 (level, low) -> IRQ 193
ehci_hcd 0000:00:13.2: EHCI Host Controller
ehci_hcd 0000:00:13.2: new USB bus registered, assigned bus number 1
ehci_hcd 0000:00:13.2: irq 193, io mem 0xfebfd000
ehci_hcd 0000:00:13.2: USB 2.0 initialized, EHCI 1.00, driver 10 Dec 2004
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 8 ports detected
ohci_hcd: 2005 April 22 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI)
ACPI: PCI Interrupt 0000:00:13.0[A] -> GSI 19 (level, low) -> IRQ 193
ohci_hcd 0000:00:13.0: OHCI Host Controller
ohci_hcd 0000:00:13.0: new USB bus registered, assigned bus number 2
ohci_hcd 0000:00:13.0: irq 193, io mem 0xfebff000
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 4 ports detected
ACPI: PCI Interrupt 0000:00:13.1[A] -> GSI 19 (level, low) -> IRQ 193
ohci_hcd 0000:00:13.1: OHCI Host Controller
ohci_hcd 0000:00:13.1: new USB bus registered, assigned bus number 3
ohci_hcd 0000:00:13.1: irq 193, io mem 0xfebfe000
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 4 ports detected
Initializing USB Mass Storage driver...
usb 1-5: new high speed USB device using ehci_hcd and address 3
usbcore: registered new driver usb-storage
USB Mass Storage support registered.
usb 2-2: new low speed USB device using ohci_hcd and address 2
input: USB HID v1.10 Mouse [Logitech Optical USB Mouse] on usb-0000:00:13.0-2
usbcore: registered new driver usbhid
drivers/usb/input/hid-core.c: v2.6:USB HID core driver
Advanced Linux Sound Architecture Driver Version 1.0.10rc1 (Mon Sep 12 08:13:09
2005 UTC).
ACPI: PCI Interrupt 0000:00:14.5[B] -> GSI 17 (level, low) -> IRQ 201
ACPI: PCI Interrupt 0000:00:14.6[B] -> GSI 17 (level, low) -> IRQ 201
MC'97 1 converters and GPIO not ready (0xff00)
ALSA device list:
#0: ATI IXP rev 2 with AD1986 at 0xfebfcc00, irq 201
#1: ATI IXP Modem rev 2 at 0xfebfc800, irq 201
NET: Registered protocol family 2
IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
TCP established hash table entries: 131072 (order: 7, 524288 bytes)
TCP bind hash table entries: 65536 (order: 6, 262144 bytes)
TCP: Hash tables configured (established 131072 bind 65536)
TCP reno registered
ip_conntrack version 2.3 (7166 buckets, 57328 max) - 216 bytes per conntrack
ip_tables: (C) 2000-2002 Netfilter core team
ipt_recent v0.3.1: Stephen Frost <[EMAIL PROTECTED]>.
http://snowman.net/projects/ipt_recent/
arp_tables: (C) 2002 David S. Miller
TCP bic registered
NET: Registered protocol family 1
NET: Registered protocol family 17
Using IPI Shortcut mode
ACPI wakeup devices:
PCE2 PS2K P0P9 LAN0 CBS0 CRD0 CRD1 AC97 MC97 USB1 USB2 EUSB SLPB
ACPI: (supports S0 S1 S3 S4 S5)
UDF-fs: No VRS found
XFS mounting filesystem hda2
Ending clean XFS mount for filesystem: hda2
VFS: Mounted root (xfs filesystem) readonly.
Freeing unused kernel memory: 184k freed
Adding 1566296k swap on /dev/hda1. Priority:-1 extents:1 across:1566296k
XFS mounting filesystem hda5
Ending clean XFS mount for filesystem: hda5
eth0: link up, 100Mbps, full-duplex, lpa 0x45E1
fglrx: module license 'Proprietary. (C) 2002 - ATI Technologies, Starnberg,
GERMANY' taints kernel.
[fglrx] Maximum main memory to use for locked dma buffers: 803 MBytes.
ACPI: PCI Interrupt 0000:01:05.0[A] -> GSI 17 (level, low) -> IRQ 201
[fglrx] module loaded - fglrx 8.22.5 [Feb 7 2006] on minor 0
[fglrx] free PCIe = 54804480
[fglrx] max PCIe = 54804480
[fglrx] free LFB = 119828480
[fglrx] max LFB = 119828480
[fglrx] free Inv = 0
[fglrx] max Inv = 0
[fglrx] total Inv = 0
[fglrx] total TIM = 0
[fglrx] total FB = 0
[fglrx] total PCIe = 16384
NETDEV WATCHDOG: eth0: transmit timed out
eth0: Transmit timeout, status 0c 0055 c07f media 50.
eth0: Tx queue start entry 7055 dirty entry 7051.
eth0: Tx descriptor 0 is 0008a04a.
eth0: Tx descriptor 1 is 0008a03c.
eth0: Tx descriptor 2 is 0008a03c.
eth0: Tx descriptor 3 is 0008a04a. (queue head)
eth0: link up, 100Mbps, full-duplex, lpa 0x45E1
NETDEV WATCHDOG: eth0: transmit timed out
eth0: Transmit timeout, status 0c 0055 c07f media 50.
eth0: Tx queue start entry 4 dirty entry 0.
eth0: Tx descriptor 0 is 0008a03c. (queue head)
eth0: Tx descriptor 1 is 0008a03c.
eth0: Tx descriptor 2 is 0008a03c.
eth0: Tx descriptor 3 is 0008a03c.
eth0: link up, 100Mbps, full-duplex, lpa 0x45E1
dmesg | less (acpi=off kernel parameter - network works)
Linux version 2.6.14-gentoo-r7 ([EMAIL PROTECTED]) (gcc version 3.4.4 (Gentoo
3.4.4-r1, ssp-3.4.4-1.0, pie-8.
7.8)) #2 Mon Feb 27 02:55:14 CET 2006
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 0000000037fd0000 (usable)
BIOS-e820: 0000000037fd0000 - 0000000037fde000 (ACPI data)
BIOS-e820: 0000000037fde000 - 0000000038000000 (ACPI NVS)
BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
BIOS-e820: 00000000ffb80000 - 0000000100000000 (reserved)
0MB HIGHMEM available.
895MB LOWMEM available.
On node 0 totalpages: 229328
DMA zone: 4096 pages, LIFO batch:1
Normal zone: 225232 pages, LIFO batch:31
HighMem zone: 0 pages, LIFO batch:1
DMI 2.3 present.
Allocating PCI resources starting at 40000000 (gap: 38000000:c6e00000)
Built 1 zonelists
Kernel command line: root=/dev/hda2 video=vesafb:ywrap,mtrr acpi=off
resume=/dev/hda1
Found and enabled local APIC!
mapped APIC to ffffd000 (fee00000)
Initializing CPU#0
PID hash table entries: 4096 (order: 12, 65536 bytes)
Detected 1600.346 MHz processor.
Using tsc for high-res timesource
Console: colour VGA+ 80x25
Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
Memory: 904888k/917312k available (2746k kernel code, 11904k reserved, 716k
data, 184k init, 0k
highmem)
Checking if this processor honours the WP bit even in supervisor mode... Ok.
Calibrating delay using timer specific routine.. 3207.22 BogoMIPS (lpj=6414450)
Mount-cache hash table entries: 512
CPU: After generic identify, caps: afe9fbff 00100000 00000000 00000000 00000000
00000000
00000000
CPU: After vendor identify, caps: afe9fbff 00100000 00000000 00000000 00000000
00000000
00000000
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 1024K
CPU: After all inits, caps: afe9fbff 00100000 00000000 00000040 00000000
00000000 00000000
mtrr: v2.0 (20020519)
CPU: Intel(R) Celeron(R) M processor 1.60GHz stepping 08
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Checking 'hlt' instruction... OK.
NET: Registered protocol family 16
PCI: PCI BIOS revision 3.00 entry at 0xf0031, last bus=2
PCI: Using configuration type 1
ACPI: Subsystem revision 20050902
ACPI: Interpreter disabled.
Linux Plug and Play Support v0.97 (c) Adam Belay
pnp: PnP ACPI: disabled
SCSI subsystem initialized
usbcore: registered new driver usbfs
usbcore: registered new driver hub
PCI: Probing PCI hardware
PCI: Probing PCI hardware (bus 00)
PCI: Ignoring BAR0-3 of IDE controller 0000:00:14.1
Boot video device is 0000:01:05.0
PCI: Transparent bridge - 0000:00:14.4
PCI: Using IRQ router default [1002/4377] at 0000:00:14.3
PCI: IRQ 0 for device 0000:00:14.1 doesn't match PIRQ mask - try pci=usepirqmask
PCI: Cannot allocate resource region 3 of device 0000:00:00.0
PCI: Bridge: 0000:00:01.0
IO window: d000-dfff
MEM window: fe900000-fe9fffff
PREFETCH window: bff00000-dfefffff
PCI: Bridge: 0000:00:14.4
IO window: e000-efff
MEM window: fea00000-feafffff
PREFETCH window: disabled.
audit: initializing netlink socket (disabled)
audit(1141059543.888:1): initialized
SGI XFS with no debug enabled
Initializing Cryptographic API
Linux agpgart interface v0.101 (c) Dave Jones
vesafb: unrecognized option mtrr
vesafb: ATI Technologies Inc., MS4 , 01.00 (OEM: ATI RADEON XPRESS 200M Series)
vesafb: VBE version: 2.0
vesafb: protected mode interface info at c000:5214
vesafb: pmi: set display start = c00c5282, set palette = c00c52bc
vesafb: pmi: ports = d810 d816 d854 d838 d83c d85c d800 d804 d8b0 d8b2 d8b4
vesafb: no monitor limits have been set
vesafb: scrolling: ywrap using protected mode interface, yres_virtual=6144
Console: switching to colour frame buffer device 128x48
vesafb: framebuffer at 0xc0000000, mapped to 0xf8880000, using 6144k, total
131072k
fb0: VESA VGA frame buffer device
PNP: No PS/2 controller found. Probing ports directly.
i8042.c: Detected active multiplexing controller, rev 1.1.
serio: i8042 AUX0 port at 0x60,0x64 irq 12
serio: i8042 AUX1 port at 0x60,0x64 irq 12
serio: i8042 AUX2 port at 0x60,0x64 irq 12
serio: i8042 AUX3 port at 0x60,0x64 irq 12
serio: i8042 KBD port at 0x60,0x64 irq 1
mice: PS/2 mouse device common for all mice
io scheduler noop registered
io scheduler cfq registered
8139too Fast Ethernet driver 0.9.27
eth0: RealTek RTL8139 at 0xf880ec00, 00:15:f2:84:4e:ec, IRQ 5
eth0: Identified 8139 chip type 'RTL-8100B/8139D'
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
ATIIXP: IDE controller at PCI slot 0000:00:14.1
PCI: IRQ 0 for device 0000:00:14.1 doesn't match PIRQ mask - try pci=usepirqmask
ATIIXP: chipset revision 0
ATIIXP: not 100% native mode: will probe irqs later
ide0: BM-DMA at 0xff00-0xff07, BIOS settings: hda:DMA, hdb:pio
ide1: BM-DMA at 0xff08-0xff0f, BIOS settings: hdc:DMA, hdd:pio
Probing IDE interface ide0...
input: AT Translated Set 2 keyboard on isa0060/serio0
hda: HTS541060G9AT00, ATA DISK drive
Synaptics Touchpad, model: 1, fw: 6.1, id: 0xa3a0b3, caps: 0xa04713/0x10008
input: SynPS/2 Synaptics TouchPad on isa0060/serio4
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
Probing IDE interface ide1...
hdc: TSSTcorpCD/DVDW TS-L532U, ATAPI CD/DVD-ROM drive
ide1 at 0x170-0x177,0x376 on irq 15
hda: max request size: 1024KiB
hda: 117210240 sectors (60011 MB) w/7539KiB Cache, CHS=16383/255/63, UDMA(100)
hda: cache flushes supported
hda: hda1 hda2 hda3 < hda5 > hda4
hdc: ATAPI 24X DVD-ROM DVD-R CD-R/RW drive, 2048kB Cache, UDMA(33)
Uniform CD-ROM driver Revision: 3.20
ehci_hcd 0000:00:13.2: EHCI Host Controller
ehci_hcd 0000:00:13.2: BIOS handoff failed (160, 01010001)
ehci_hcd 0000:00:13.2: continuing after BIOS bug...
ehci_hcd 0000:00:13.2: new USB bus registered, assigned bus number 1
ehci_hcd 0000:00:13.2: irq 11, io mem 0xfebfd000
ehci_hcd 0000:00:13.2: USB 2.0 initialized, EHCI 1.00, driver 10 Dec 2004
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 8 ports detected
ohci_hcd: 2005 April 22 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI)
ohci_hcd 0000:00:13.0: OHCI Host Controller
ohci_hcd 0000:00:13.0: new USB bus registered, assigned bus number 2
ohci_hcd 0000:00:13.0: irq 11, io mem 0xfebff000
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 4 ports detected
ohci_hcd 0000:00:13.1: OHCI Host Controller
ohci_hcd 0000:00:13.1: new USB bus registered, assigned bus number 3
ohci_hcd 0000:00:13.1: irq 11, io mem 0xfebfe000
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 4 ports detected
Initializing USB Mass Storage driver...
usb 1-5: new high speed USB device using ehci_hcd and address 3
usbcore: registered new driver usb-storage
USB Mass Storage support registered.
usb 2-2: new low speed USB device using ohci_hcd and address 2
input: USB HID v1.10 Mouse [Logitech Optical USB Mouse] on usb-0000:00:13.0-2
usbcore: registered new driver usbhid
drivers/usb/input/hid-core.c: v2.6:USB HID core driver
Advanced Linux Sound Architecture Driver Version 1.0.10rc1 (Mon Sep 12 08:13:09
2005 UTC).
MC'97 1 converters and GPIO not ready (0xff00)
ALSA device list:
#0: ATI IXP rev 2 with AD1986 at 0xfebfcc00, irq 10
#1: ATI IXP Modem rev 2 at 0xfebfc800, irq 10
NET: Registered protocol family 2
IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
TCP established hash table entries: 131072 (order: 7, 524288 bytes)
TCP bind hash table entries: 65536 (order: 6, 262144 bytes)
TCP: Hash tables configured (established 131072 bind 65536)
TCP reno registered
ip_conntrack version 2.3 (7166 buckets, 57328 max) - 216 bytes per conntrack
ip_tables: (C) 2000-2002 Netfilter core team
ipt_recent v0.3.1: Stephen Frost <[EMAIL PROTECTED]>.
http://snowman.net/projects/ipt_recent/
arp_tables: (C) 2002 David S. Miller
TCP bic registered
NET: Registered protocol family 1
NET: Registered protocol family 17
Using IPI Shortcut mode
UDF-fs: No VRS found
XFS mounting filesystem hda2
Ending clean XFS mount for filesystem: hda2
VFS: Mounted root (xfs filesystem) readonly.
Freeing unused kernel memory: 184k freed
Adding 1566296k swap on /dev/hda1. Priority:-1 extents:1 across:1566296k
XFS mounting filesystem hda5
Ending clean XFS mount for filesystem: hda5
eth0: link up, 100Mbps, full-duplex, lpa 0x45E1
fglrx: module license 'Proprietary. (C) 2002 - ATI Technologies, Starnberg,
GERMANY' taints kernel.
[fglrx] Maximum main memory to use for locked dma buffers: 803 MBytes.
[fglrx] module loaded - fglrx 8.22.5 [Feb 7 2006] on minor 0
[fglrx] free PCIe = 54804480
[fglrx] max PCIe = 54804480
[fglrx] free LFB = 119828480
[fglrx] max LFB = 119828480
[fglrx] free Inv = 0
[fglrx] max Inv = 0
[fglrx] total Inv = 0
[fglrx] total TIM = 0
[fglrx] total FB = 0
[fglrx] total PCIe = 16384
could this be a buggy DSDT issue ??
------- You are receiving this mail because: -------
You are the assignee for the bug, or are watching the assignee.
-------------------------------------------------------
This SF.Net email is sponsored by xPML, a groundbreaking scripting language
that extends applications into web and mobile media. Attend the live webcast
and join the prime developer group breaking into this new coding territory!
http://sel.as-us.falkag.net/sel?cmd=lnk&kid=110944&bid=241720&dat=121642
_______________________________________________
acpi-bugzilla mailing list
acpi-bugzilla@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/acpi-bugzilla
