http://bugzilla.kernel.org/show_bug.cgi?id=6522
------- Additional Comments From [EMAIL PROTECTED] 2006-05-18 04:37 -------
I tried the simple patch and it produces the same effect as my own. Which means
it seems to hang when doing dhcpcd (as reported earlier), but really it is just
failing. I was copying some lines and all of a sudden dhcpcd timed out and kdm
came up. This time i've found the log:
May 18 13:03:36 [kernel] Bootdata ok (command line is root=/dev/sda3 vga=0x31B
video=vesafb:ywrap,mtrr noapic)
May 18 13:03:36 [kernel] Linux version 2.6.16.14 ([EMAIL PROTECTED]) (gcc
version
4.1.0 (Gentoo 4.1.0)) #4 PREEMPT Thu May 18 12:27:43 CEST 2006
May 18 13:03:36 [kernel] BIOS-provided physical RAM map:
May 18 13:03:36 [kernel] BIOS-e820: 0000000000000000 - 000000000009fc00
(usable)
May 18 13:03:36 [kernel] BIOS-e820: 000000000009fc00 - 00000000000a0000
(reserved)
May 18 13:03:36 [kernel] BIOS-e820: 00000000000e4000 - 0000000000100000
(reserved)
May 18 13:03:36 [kernel] BIOS-e820: 0000000000100000 - 000000003bfd0000
(usable)
May 18 13:03:36 [kernel] BIOS-e820: 000000003bfd0000 - 000000003bfde000 (ACPI
data)
May 18 13:03:36 [kernel] BIOS-e820: 000000003bfde000 - 000000003c000000 (ACPI
NVS)
May 18 13:03:36 [kernel] BIOS-e820: 00000000ff780000 - 0000000100000000
(reserved)
May 18 13:03:36 [kernel] ACPI: Scanning for RSDP signature... <6>ACPI: done
May 18 13:03:36 [kernel] ACPI: RSDP (v000
ACPIAM ) @ 0x00000000000f96e0
May 18 13:03:36 [kernel] ACPI: RSDT (v001 A M I OEMRSDT 0x10000514 MSFT
0x00000097) @ 0x000000003bfd0000
May 18 13:03:36 [kernel] ACPI: FADT (v002 A M I OEMFACP 0x10000514 MSFT
0x00000097) @ 0x000000003bfd0200
May 18 13:03:36 [kernel] ACPI: MADT (v001 A M I OEMAPIC 0x10000514 MSFT
0x00000097) @ 0x000000003bfd0390
May 18 13:03:36 [kernel] ACPI: MCFG (v001 A M I OEMMCFG 0x10000514 MSFT
0x00000097) @ 0x000000003bfd03f0
May 18 13:03:36 [kernel] ACPI: OEMB (v001 A M I AMI_OEM 0x10000514 MSFT
0x00000097) @ 0x000000003bfde040
May 18 13:03:36 [kernel] ACPI: DSDT (v001 1ABZR 1ABZRB49 0x00000b49 INTL
0x02002026) @ 0x0000000000000000
May 18 13:03:36 [kernel] On node 0 totalpages: 241303
May 18 13:03:36 [kernel] DMA zone: 2990 pages, LIFO batch:0
May 18 13:03:36 [kernel] DMA32 zone: 238313 pages, LIFO batch:31
May 18 13:03:36 [kernel] Normal zone: 0 pages, LIFO batch:0
May 18 13:03:36 [kernel] HighMem zone: 0 pages, LIFO batch:0
May 18 13:03:36 [kernel] ATI board detected. Disabling timer routing over 8254.
May 18 13:03:36 [kernel] ACPI: PM-Timer IO Port: 0x808
May 18 13:03:36 [kernel] ACPI: Local APIC address 0xfee00000
May 18 13:03:36 [kernel] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
May 18 13:03:36 [kernel] Processor #0 15:15 APIC version 16
May 18 13:03:36 [kernel] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x81] disabled)
May 18 13:03:36 [kernel] ACPI: Skipping IOAPIC probe due to 'noapic' option.
May 18 13:03:36 [kernel] Using ACPI for processor (LAPIC) configuration
information
May 18 13:03:36 [kernel] Intel MultiProcessor Specification v1.4
May 18 13:03:36 [kernel] Virtual Wire compatibility mode.
May 18 13:03:36 [kernel] OEM ID: ATI Product ID: RS480 APIC at:
0xFEE00000
May 18 13:03:36 [kernel] I/O APIC #1 Version 33 at 0xFEC00000.
May 18 13:03:36 [kernel] Setting APIC routing to flat
May 18 13:03:36 [kernel] Processors: 1
May 18 13:03:36 [kernel] Allocating PCI resources starting at 40000000 (gap:
3c000000:c3780000)
May 18 13:03:36 [kernel] Checking aperture...
May 18 13:03:36 [kernel] CPU 0: aperture @ 77ee000000 size 32 MB
May 18 13:03:36 [kernel] Aperture from northbridge cpu 0 too small (32 MB)
May 18 13:03:36 [kernel] No AGP bridge found
May 18 13:03:36 [kernel] Built 1 zonelists
May 18 13:03:36 [kernel] Kernel command line: root=/dev/sda3 vga=0x31B
video=vesafb:ywrap,mtrr noapic
May 18 13:03:36 [kernel] Initializing CPU#0
May 18 13:03:36 [kernel] PID hash table entries: 4096 (order: 12, 131072 bytes)
May 18 13:03:36 [kernel] time.c: Using 3.579545 MHz WALL PM GTOD PIT/TSC timer.
May 18 13:03:36 [kernel] time.c: Detected 1994.240 MHz processor.
May 18 13:03:36 [kernel] Console: colour dummy device 80x25
May 18 13:03:36 [kernel] Dentry cache hash table entries: 131072 (order: 8,
1048576 bytes)
May 18 13:03:36 [kernel] Inode-cache hash table entries: 65536 (order: 7,
524288 bytes)
May 18 13:03:36 [kernel] Memory: 963232k/982848k available (2431k kernel code,
18940k reserved, 902k data, 184k init)
May 18 13:03:36 [kernel] Calibrating delay using timer specific routine..
3993.88 BogoMIPS (lpj=1996944)
May 18 13:03:36 [kernel] Mount-cache hash table entries: 256
May 18 13:03:36 [kernel] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64
bytes/line)
May 18 13:03:36 [kernel] CPU: L2 Cache: 512K (64 bytes/line)
May 18 13:03:36 [kernel] CPU: AMD Athlon(tm) 64 Processor 3200+ stepping 02
May 18 13:03:36 [kernel] tbxface-0109 [02] load_tables : ACPI Tables
successfully acquired
May 18 13:03:36 [kernel] ACPI Error (nssearch-0311): Bad character in ACPI
Name: 43035350 [20060127]
- Last output repeated twice -
May 18 13:03:36 [kernel] Parsing all Control Methods:
May 18 13:03:36 [kernel] Table [DSDT](id 0005) - 556 Objects with 53 Devices
164 Methods 12 Regions
May 18 13:03:36 [kernel] ACPI Namespace successfully loaded at root
ffffffff80467aa0
May 18 13:03:36 [kernel] ACPI: setting ELCR to 0200 (from 8e28)
May 18 13:03:36 [kernel] evxfevnt-0091 [03] enable : Transition
to ACPI mode successful
May 18 13:03:36 [kernel] Using local APIC timer interrupts.
May 18 13:03:36 [kernel] result 12464015
May 18 13:03:36 [kernel] Detected 12.464 MHz APIC timer.
May 18 13:03:36 [kernel] testing NMI watchdog ... OK.
May 18 13:03:36 [kernel] DMI 2.3 present.
May 18 13:03:36 [kernel] NET: Registered protocol family 16
May 18 13:03:36 [kernel] ACPI: bus type pci registered
May 18 13:03:36 [kernel] PCI: Using configuration type 1
May 18 13:03:36 [kernel] PCI: Using MMCONFIG at e0000000
May 18 13:03:36 [kernel] ACPI: Subsystem revision 20060127
May 18 13:03:36 [kernel] evgpeblk-1037 [05] ev_initialize_gpe_bloc: Found 6
Wake, Enabled 1 Runtime GPEs in this block
May 18 13:03:36 [kernel] Completing Region/Field/Buffer/Package
initialization:...................................................................................................
May 18 13:03:36 [kernel] Initialized 10/12 Regions 19/19 Fields 36/36 Buffers
34/35 Packages (565 nodes)
May 18 13:03:36 [kernel] Executing all Device _STA and_INI
methods:.........................................................
May 18 13:03:36 [kernel] 57 Devices found - executed 0 _STA, 0 _INI methods
May 18 13:03:36 [kernel] ACPI: Interpreter enabled
May 18 13:03:36 [kernel] ACPI: Using PIC for interrupt routing
May 18 13:03:36 [kernel] ACPI: PCI Root Bridge [PCI0] (0000:00)
May 18 13:03:36 [kernel] PCI: Probing PCI hardware (bus 00)
May 18 13:03:36 [kernel] PCI: Ignoring BAR0-3 of IDE controller 0000:00:14.1
May 18 13:03:36 [kernel] Boot video device is 0000:01:05.0
May 18 13:03:36 [kernel] PCI: Transparent bridge - 0000:00:14.4
May 18 13:03:36 [kernel] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
May 18 13:03:36 [kernel] ACPI: PCI Interrupt Routing Table
[\_SB_.PCI0.P0P1._PRT]
May 18 13:03:36 [kernel] ACPI: PCI Interrupt Routing Table
[\_SB_.PCI0.P0P9._PRT]
May 18 13:03:36 [kernel] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 7 10 11 12
14 *15)
May 18 13:03:36 [kernel] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 7 *10 11
12 14 15)
May 18 13:03:36 [kernel] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 7 10 11 12
14 15) *0, disabled.
May 18 13:03:36 [kernel] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 *5 7 10 11
12 14 15)
May 18 13:03:36 [kernel] ACPI: PCI Interrupt Link [LNKE] (IRQs *3 4 5 7 10 11
12 14 15)
May 18 13:03:36 [kernel] ACPI: PCI Interrupt Link [LNKF] (IRQs *9)
May 18 13:03:36 [kernel] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 7 10 11 12
14 15) *0, disabled.
May 18 13:03:36 [kernel] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 7 10 *11
12 14 15)
May 18 13:03:36 [kernel] Linux Plug and Play Support v0.97 (c) Adam Belay
May 18 13:03:36 [kernel] SCSI subsystem initialized
May 18 13:03:36 [kernel] usbcore: registered new driver usbfs
May 18 13:03:36 [kernel] usbcore: registered new driver hub
May 18 13:03:36 [kernel] PCI: Using ACPI for IRQ routing
May 18 13:03:36 [kernel] PCI: If a device doesn't work, try "pci=routeirq". If
it helps, post a report
May 18 13:03:36 [kernel] PCI-DMA: Disabling IOMMU.
May 18 13:03:36 [kernel] PCI: Bridge: 0000:00:01.0
May 18 13:03:36 [kernel] IO window: d000-dfff
May 18 13:03:36 [kernel] MEM window: fea00000-feafffff
May 18 13:03:36 [kernel] PREFETCH window: f0000000-f7ffffff
May 18 13:03:36 [kernel] PCI: Bridge: 0000:00:14.4
May 18 13:03:36 [kernel] IO window: e000-efff
May 18 13:03:36 [kernel] MEM window: feb00000-febfffff
May 18 13:03:36 [kernel] PREFETCH window: 40000000-400fffff
May 18 13:03:36 [kernel] IA32 emulation $Id: sys_ia32.c,v 1.32 2002/03/24
13:02:28 ak Exp $
May 18 13:03:36 [kernel] Total HugeTLB memory allocated, 0
May 18 13:03:36 [kernel] io scheduler noop registered
May 18 13:03:36 [kernel] io scheduler deadline registered (default)
May 18 13:03:36 [kernel] io scheduler cfq registered
May 18 13:03:36 [kernel] vesafb: framebuffer at 0xf0000000, mapped to
0xffffc20010100000, using 7680k, total 65536k
May 18 13:03:36 [kernel] vesafb: mode is 1280x1024x24, linelength=3840,
pages=16
May 18 13:03:36 [kernel] vesafb: scrolling: redraw
May 18 13:03:36 [kernel] vesafb: Truecolor: size=0:8:8:8, shift=0:16:8:0
May 18 13:03:36 [kernel] Console: switching to colour frame buffer device
160x64
May 18 13:03:36 [kernel] fb0: VESA VGA frame buffer device
May 18 13:03:36 [kernel] Real Time Clock Driver v1.12ac
May 18 13:03:36 [kernel] Linux agpgart interface v0.101 (c) Dave Jones
May 18 13:03:36 [kernel] PNP: No PS/2 controller found. Probing ports directly.
May 18 13:03:36 [kernel] serio: i8042 AUX port at 0x60,0x64 irq 12
May 18 13:03:36 [kernel] serio: i8042 KBD port at 0x60,0x64 irq 1
May 18 13:03:36 [kernel] isa bounce pool size: 16 pages
May 18 13:03:36 [kernel] RAMDISK driver initialized: 16 RAM disks of 4096K size
1024 blocksize
May 18 13:03:36 [kernel] loop: loaded (max 8 devices)
May 18 13:03:36 [kernel] 8139too Fast Ethernet driver 0.9.27
May 18 13:03:36 [kernel] ACPI: PCI Interrupt Link [LNKE] BIOS reported IRQ 15,
using IRQ 3
May 18 13:03:36 [kernel] ACPI: PCI Interrupt Link [LNKE] enabled at IRQ 3
May 18 13:03:36 [kernel] PCI: setting IRQ 3 as level-triggered
May 18 13:03:36 [kernel] ACPI: PCI Interrupt 0000:02:03.0[A] -> Link [LNKE] ->
GSI 3 (level, low) -> IRQ 3
May 18 13:03:36 [kernel] eth0: RealTek RTL8139 at 0xffffc20000004c00,
00:13:d3:ab:7a:d0, IRQ 3
May 18 13:03:36 [kernel] eth0: Identified 8139 chip type 'RTL-8100B/8139D'
May 18 13:03:36 [kernel] Uniform Multi-Platform E-IDE driver Revision:
7.00alpha2
May 18 13:03:36 [kernel] ide: Assuming 33MHz system bus speed for PIO modes;
override with idebus=xx
May 18 13:03:36 [kernel] ATIIXP: IDE controller at PCI slot 0000:00:14.1
May 18 13:03:36 [kernel] ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 15
May 18 13:03:36 [kernel] PCI: setting IRQ 15 as level-triggered
May 18 13:03:36 [kernel] ACPI: PCI Interrupt 0000:00:14.1[A] -> Link [LNKA] ->
GSI 15 (level, low) -> IRQ 15
May 18 13:03:36 [kernel] ATIIXP: chipset revision 128
May 18 13:03:36 [kernel] ATIIXP: not 100% native mode: will probe irqs later
May 18 13:03:36 [kernel] ide0: BM-DMA at 0xff00-0xff07, BIOS settings:
hda:DMA, hdb:pio
May 18 13:03:36 [kernel] ATIIXP: simplex device: DMA disabled
May 18 13:03:36 [kernel] ide1: ATIIXP Bus-Master DMA disabled (BIOS)
May 18 13:03:36 [kernel] Probing IDE interface ide0...
May 18 13:03:36 [kernel] hda: TSSTcorpCD/DVDW SH-W162C, ATAPI CD/DVD-ROM drive
May 18 13:03:36 [kernel] Probing IDE interface ide1...
- Last output repeated twice -
May 18 13:03:36 [kernel] hda: ATAPI 48X DVD-ROM DVD-R CD-R/RW drive, 2048kB
Cache, UDMA(33)
May 18 13:03:36 [kernel] Uniform CD-ROM driver Revision: 3.20
May 18 13:03:36 [kernel] libata version 1.20 loaded.
May 18 13:03:36 [kernel] sata_sil 0000:00:11.0: version 0.9
May 18 13:03:36 [kernel] acpi_bus-0201 [01] bus_set_power : Device is
not power manageable
May 18 13:03:36 [kernel] ACPI: PCI Interrupt Link [LNKH] enabled at IRQ 11
May 18 13:03:36 [kernel] PCI: setting IRQ 11 as level-triggered
May 18 13:03:36 [kernel] ACPI: PCI Interrupt 0000:00:11.0[A] -> Link [LNKH] ->
GSI 11 (level, low) -> IRQ 11
May 18 13:03:36 [kernel] ata1: SATA max UDMA/100 cmd 0xFFFFC20000006C80 ctl
0xFFFFC20000006C8A bmdma 0xFFFFC20000006C00 irq 11
May 18 13:03:36 [kernel] ata2: SATA max UDMA/100 cmd 0xFFFFC20000006CC0 ctl
0xFFFFC20000006CCA bmdma 0xFFFFC20000006C08 irq 11
May 18 13:03:36 [kernel] ata1: SATA link up 1.5 Gbps (SStatus 113)
May 18 13:03:36 [kernel] ata1: dev 0 cfg 49:2f00 82:7c6b 83:7f09 84:4673
85:7c69 86:3e01 87:4663 88:407f
May 18 13:03:36 [kernel] ata1: dev 0 ATA-7, max UDMA/133, 490234752 sectors:
LBA48
May 18 13:03:36 [kernel] ata1: dev 0 configured for UDMA/100
May 18 13:03:36 [kernel] scsi0 : sata_sil
May 18 13:03:36 [kernel] ata2: SATA link down (SStatus 0)
May 18 13:03:36 [kernel] scsi1 : sata_sil
May 18 13:03:36 [kernel] Vendor: ATA Model: Maxtor 6L250S0 Rev: BANC
May 18 13:03:36 [kernel] Type: Direct-Access ANSI SCSI
revision: 05
May 18 13:03:36 [kernel] SCSI device sda: 490234752 512-byte hdwr sectors
(251000 MB)
May 18 13:03:36 [kernel] sda: Write Protect is off
May 18 13:03:36 [kernel] sda: Mode Sense: 00 3a 00 00
May 18 13:03:36 [kernel] SCSI device sda: drive cache: write back
May 18 13:03:36 [kernel] SCSI device sda: 490234752 512-byte hdwr sectors
(251000 MB)
May 18 13:03:36 [kernel] sda: Write Protect is off
May 18 13:03:36 [kernel] sda: Mode Sense: 00 3a 00 00
May 18 13:03:36 [kernel] SCSI device sda: drive cache: write back
May 18 13:03:36 [kernel] sda: sda1 sda2 sda3 sda4 < sda5 >
May 18 13:03:36 [kernel] sd 0:0:0:0: Attached scsi disk sda
May 18 13:03:36 [kernel] ieee1394: raw1394: /dev/raw1394 device initialized
May 18 13:03:36 [kernel] usbmon: debugfs is not available
May 18 13:03:36 [kernel] acpi_bus-0201 [01] bus_set_power : Device is
not power manageable
May 18 13:03:36 [kernel] ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 5
May 18 13:03:36 [kernel] Losing some ticks... checking if CPU frequency
changed.
May 18 13:03:36 [kernel] PCI: setting IRQ 5 as level-triggered
May 18 13:03:36 [kernel] ACPI: PCI Interrupt 0000:00:13.2[A] -> Link [LNKD] ->
GSI 5 (level, low) -> IRQ 5
May 18 13:03:36 [kernel] ehci_hcd 0000:00:13.2: EHCI Host Controller
May 18 13:03:36 [kernel] ehci_hcd 0000:00:13.2: new USB bus registered,
assigned bus number 1
May 18 13:03:36 [kernel] ehci_hcd 0000:00:13.2: irq 5, io mem 0xfe9f8000
May 18 13:03:36 [kernel] ehci_hcd 0000:00:13.2: USB 2.0 started, EHCI 1.00,
driver 10 Dec 2004
May 18 13:03:36 [kernel] usb usb1: configuration #1 chosen from 1 choice
May 18 13:03:36 [kernel] hub 1-0:1.0: USB hub found
May 18 13:03:36 [kernel] hub 1-0:1.0: 8 ports detected
May 18 13:03:36 [kernel] ohci_hcd: 2005 April 22 USB 1.1 'Open' Host Controller
(OHCI) Driver (PCI)
May 18 13:03:36 [kernel] ACPI: PCI Interrupt 0000:00:13.0[A] -> Link [LNKD] ->
GSI 5 (level, low) -> IRQ 5
May 18 13:03:36 [kernel] ohci_hcd 0000:00:13.0: OHCI Host Controller
May 18 13:03:36 [kernel] ohci_hcd 0000:00:13.0: new USB bus registered,
assigned bus number 2
May 18 13:03:36 [kernel] ohci_hcd 0000:00:13.0: irq 5, io mem 0xfe9fa000
May 18 13:03:36 [kernel] usb usb2: configuration #1 chosen from 1 choice
May 18 13:03:36 [kernel] hub 2-0:1.0: USB hub found
May 18 13:03:36 [kernel] usb 1-4: new high speed USB device using ehci_hcd and
address 2
May 18 13:03:36 [kernel] hub 2-0:1.0: 4 ports detected
May 18 13:03:36 [kernel] ACPI: PCI Interrupt 0000:00:13.1[A] -> Link [LNKD] ->
GSI 5 (level, low) -> IRQ 5
May 18 13:03:36 [kernel] ohci_hcd 0000:00:13.1: OHCI Host Controller
May 18 13:03:36 [kernel] ohci_hcd 0000:00:13.1: new USB bus registered,
assigned bus number 3
May 18 13:03:36 [kernel] ohci_hcd 0000:00:13.1: irq 5, io mem 0xfe9f9000
May 18 13:03:36 [kernel] usb 1-4: configuration #1 chosen from 1 choice
May 18 13:03:36 [kernel] hub 1-4:1.0: USB hub found
May 18 13:03:36 [kernel] hub 1-4:1.0: 4 ports detected
May 18 13:03:36 [kernel] usb usb3: configuration #1 chosen from 1 choice
May 18 13:03:36 [kernel] hub 3-0:1.0: USB hub found
May 18 13:03:36 [kernel] hub 3-0:1.0: 4 ports detected
May 18 13:03:36 [kernel] Initializing USB Mass Storage driver...
May 18 13:03:36 [kernel] usbcore: registered new driver usb-storage
May 18 13:03:36 [kernel] USB Mass Storage support registered.
May 18 13:03:36 [kernel] usbcore: registered new driver hiddev
May 18 13:03:36 [kernel] usbcore: registered new driver usbhid
May 18 13:03:36 [kernel] drivers/usb/input/hid-core.c: v2.6:USB HID core driver
May 18 13:03:36 [kernel] mice: PS/2 mouse device common for all mice
May 18 13:03:36 [kernel] input: AT Translated Set 2 keyboard
as /class/input/input0
May 18 13:03:36 [kernel] logips2pp: Detected unknown logitech mouse model 1
May 18 13:03:36 [kernel] input: PS/2 Logitech Mouse as /class/input/input1
May 18 13:03:36 [kernel] input: PC Speaker as /class/input/input2
May 18 13:03:36 [kernel] NET: Registered protocol family 2
May 18 13:03:36 [kernel] IP route cache hash table entries: 32768 (order: 6,
262144 bytes)
May 18 13:03:36 [kernel] TCP established hash table entries: 131072 (order: 8,
1048576 bytes)
May 18 13:03:36 [kernel] TCP reno registered
May 18 13:03:36 [kernel] TCP bic registered
May 18 13:03:36 [kernel] NET: Registered protocol family 1
May 18 13:03:36 [kernel] NET: Registered protocol family 17
May 18 13:03:36 [kernel] EXT3-fs: mounted filesystem with ordered data mode.
May 18 13:03:36 [kernel] VFS: Mounted root (ext3 filesystem) readonly.
May 18 13:03:36 [kernel] Freeing unused kernel memory: 184k freed
May 18 13:03:36 [kernel] kjournald starting. Commit interval 5 seconds
May 18 13:03:36 [kernel] acpi_bus-0201 [01] bus_set_power : Device is
not power manageable
May 18 13:03:36 [kernel] ACPI: PCI Interrupt 0000:00:14.2[A] -> Link [LNKA] ->
GSI 15 (level, low) -> IRQ 15
May 18 13:03:36 [kernel] hda_codec: Unknown model for ALC880, trying auto-probe
from BIOS...
May 18 13:03:36 [kernel] Adding 1959920k swap on /dev/sda2. Priority:-1
extents:1 across:1959920k
May 18 13:03:36 [kernel] EXT3 FS on sda3, internal journal
May 18 13:03:36 [kernel] eth0: link up, 100Mbps, full-duplex, lpa 0x45E1
May 18 13:03:36 [kernel] irq 15: nobody cared (try booting with the "irqpoll"
option)
May 18 13:03:36 [kernel] Call Trace: <IRQ>
<ffffffff8014c735>{__report_bad_irq+53}
May 18 13:03:36 [kernel] <ffffffff8014ca0e>{note_interrupt+638}
<ffffffff8014c0fe>{__do_IRQ+238}
May 18 13:03:36 [kernel] <ffffffff8010d782>{do_IRQ+66}
<ffffffff80109ad0>{default_idle+0}
May 18 13:03:36 [kernel] <ffffffff8010b240>{ret_from_intr+0} <EOI>
<ffffffff8035b713>{thread_return+68}
May 18 13:03:36 [kernel] <ffffffff80109afa>{default_idle+42}
<ffffffff80109b6d>{cpu_idle+61}
May 18 13:03:36 [kernel] <ffffffff8048486f>{start_kernel+495}
<ffffffff80484267>{_sinittext+615}
May 18 13:03:36 [kernel] handlers:
May 18 13:03:36 [kernel] [<ffffffff8805b410>] (azx_interrupt+0x0/0x1d0
[snd_hda_intel])
May 18 13:03:36 [kernel] NETDEV WATCHDOG: eth0: transmit timed out
May 18 13:03:36 [kernel] eth0: Transmit timeout, status 0c 0005 c07f media 10.
May 18 13:03:36 [kernel] eth0: Tx queue start entry 4 dirty entry 0.
May 18 13:03:36 [kernel] eth0: Tx descriptor 0 is 0008a24e. (queue head)
May 18 13:03:36 [kernel] eth0: Tx descriptor 1 is 0008a24e.
May 18 13:03:36 [kernel] eth0: Tx descriptor 2 is 0008a24e.
May 18 13:03:36 [kernel] eth0: Tx descriptor 3 is 0008a24e.
May 18 13:03:36 [kernel] eth0: link up, 100Mbps, full-duplex, lpa 0x45E1
May 18 13:03:36 [kernel] NETDEV WATCHDOG: eth0: transmit timed out
May 18 13:03:36 [kernel] eth0: Transmit timeout, status 0c 0005 c07f media 10.
May 18 13:03:36 [kernel] eth0: Tx queue start entry 4 dirty entry 0.
May 18 13:03:36 [kernel] eth0: Tx descriptor 0 is 0008a24e. (queue head)
May 18 13:03:36 [kernel] eth0: Tx descriptor 1 is 0008a24e.
May 18 13:03:36 [kernel] eth0: Tx descriptor 2 is 0008a24e.
May 18 13:03:36 [kernel] eth0: Tx descriptor 3 is 0008a24e.
May 18 13:03:36 [kernel] eth0: link up, 100Mbps, full-duplex, lpa 0x45E1
May 18 13:03:38 [kernel] [drm] Initialized drm 1.0.1 20051102
May 18 13:03:40 [kernel] eth0: link up, 100Mbps, full-duplex, lpa 0x45E1
May 18 13:03:40 [kernel] spurious 8259A interrupt: IRQ7.
May 18 13:04:16 [kernel] NETDEV WATCHDOG: eth0: transmit timed out
May 18 13:04:19 [kernel] eth0: Transmit timeout, status 0c 0005 c07f media 10.
May 18 13:04:19 [kernel] eth0: Tx queue start entry 4 dirty entry 0.
May 18 13:04:19 [kernel] eth0: Tx descriptor 0 is 0008a24e. (queue head)
May 18 13:04:19 [kernel] eth0: Tx descriptor 1 is 0008a24e.
May 18 13:04:19 [kernel] eth0: Tx descriptor 2 is 0008a24e.
May 18 13:04:19 [kernel] eth0: Tx descriptor 3 is 0008a24e.
May 18 13:04:19 [kernel] eth0: link up, 100Mbps, full-duplex, lpa 0x45E1
May 18 13:04:35 [kernel] azx_get_response timeout
I also tried applying
http://ftp.kernel.org/pub/linux/kernel/people/lenb/acpi/patches/test/2.6.16/acpi-acpica-20060310-2.6.16.diff.gz
to a 2.6.16 kernel, but this doesn't seem to be the way.
------- You are receiving this mail because: -------
You are the assignee for the bug, or are watching the assignee.
You are on the CC list for the bug, or are watching someone who is.
-------------------------------------------------------
Using Tomcat but need to do more? Need to support web services, security?
Get stuff done quickly with pre-integrated technology to make your job easier
Download IBM WebSphere Application Server v.1.0.1 based on Apache Geronimo
http://sel.as-us.falkag.net/sel?cmd=lnk&kid=120709&bid=263057&dat=121642
_______________________________________________
acpi-bugzilla mailing list
acpi-bugzilla@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/acpi-bugzilla
