http://bugzilla.kernel.org/show_bug.cgi?id=5534
------- Additional Comments From [EMAIL PROTECTED] 2006-05-27 02:10 ------- Running SUSE10.1 default kernel (2.6.16.13-4-default) with the patch from comment #112, seems to fix the problem with thermal events, but now I see a problem with enabling fans. After a few transitions into active[3] state I get the following message: 21:12:12 kernel: ACPI Warning (acpi_power-0445): Transitioning device [C273] to D0 [20060127] 21:12:12 kernel: ACPI Warning (acpi_bus-0267): Transitioning device [C273] to D0 [20060127] 21:12:12 kernel: ACPI Warning (acpi_thermal-0644): Unable to turn cooling device [ffff810037fa56c0] 'on' [20060127] After this the fan is no longer enabled when in state active[3], even when reading the thermal zone shows it as active. At this point if there is a transition to active[2] the fan is still enabled, but after a few such transitions I see: 21:21:35 kernel: ACPI Warning (acpi_power-0445): Transitioning device [C272] to D0 [20060127] 21:21:35 kernel: ACPI Warning (acpi_bus-0267): Transitioning device [C272] to D0 [20060127] 21:21:35 kernel: ACPI Warning (acpi_thermal-0644): Unable to turn cooling device [ffff810037fa57c0] 'on' [20060127] and again the fan stops working for state active[2]. After getting the above messages, the fans will not turn on even after moving out of the active state and back. Only a reboot seems to fix this. ------- You are receiving this mail because: ------- You are on the CC list for the bug, or are watching someone who is. _______________________________________________ acpi-bugzilla mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/acpi-bugzilla
