http://bugzilla.kernel.org/show_bug.cgi?id=7562
------- Additional Comments From [EMAIL PROTECTED] 2006-12-07 13:19 -------
Great news! I managed to get sound and linux doesn't hang now.
Ubuntu 6.10, kernel 2.6.19 with disabled nvidia timer quirk (probably not
needed, didn't test w/o it) and "noapic" boot parameter.
After i play some music i get error about "nobody cared irq". Here are dmesg and
/proc/interrupts, feel free to contact me for more info.
[EMAIL PROTECTED]:~$ dmesg
[ 0.000000] Linux version 2.6.19 ([EMAIL PROTECTED]) (gcc version 4.1.2
20060928
(prerelease) (Ubuntu 4.1.1-13ubuntu5)) #1 SMP Thu Dec 7 22:48:10 EET 2006
[ 0.000000] Command line: root=/dev/sda2 noapic
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009dc00 (usable)
[ 0.000000] BIOS-e820: 000000000009dc00 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000d2000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 000000003ff00000 (usable)
[ 0.000000] BIOS-e820: 000000003ff00000 - 000000003ff17000 (ACPI data)
[ 0.000000] BIOS-e820: 000000003ff17000 - 000000003ff80000 (ACPI NVS)
[ 0.000000] BIOS-e820: 000000003ff80000 - 0000000040000000 (reserved)
[ 0.000000] BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
[ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved)
[ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
[ 0.000000] BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved)
[ 0.000000] Entering add_active_range(0, 0, 157) 0 entries of 3200 used
[ 0.000000] Entering add_active_range(0, 256, 261888) 1 entries of 3200 used
[ 0.000000] end_pfn_map = 1048576
[ 0.000000] DMI present.
[ 0.000000] ACPI: RSDP (v000 HP ) @
0x00000000000f89a0
[ 0.000000] ACPI: RSDT (v001 HP RSDT 0x06040000 LTP 0x00000000) @
0x000000003ff0fb99
[ 0.000000] ACPI: FADT (v001 HP MCP51M 0x06040000 PTL_ 0x000f4240) @
0x000000003ff16d52
[ 0.000000] ACPI: SSDT (v001 HP POWERNOW 0x06040000 LTP 0x00000001) @
0x000000003ff16dc6
[ 0.000000] ACPI: MCFG (v001 HP MCFG 0x06040000 LTP 0x00000000) @
0x000000003ff16f48
[ 0.000000] ACPI: MADT (v001 HP APIC 0x06040000 LTP 0x00000000) @
0x000000003ff16f84
[ 0.000000] ACPI: BOOT (v001 HP $SBFTBL$ 0x06040000 LTP 0x00000001) @
0x000000003ff16fd8
[ 0.000000] ACPI: DSDT (v001 HP MCP51M 0x06040000 MSFT 0x0100000e) @
0x0000000000000000
[ 0.000000] Scanning NUMA topology in Northbridge 24
[ 0.000000] Number of nodes 1
[ 0.000000] Node 0 MemBase 0000000000000000 Limit 000000003ff00000
[ 0.000000] Entering add_active_range(0, 0, 157) 0 entries of 3200 used
[ 0.000000] Entering add_active_range(0, 256, 261888) 1 entries of 3200 used
[ 0.000000] NUMA: Using 63 for the hash shift.
[ 0.000000] Using node hash shift of 63
[ 0.000000] Bootmem setup node 0 0000000000000000-000000003ff00000
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0 -> 4096
[ 0.000000] DMA32 4096 -> 1048576
[ 0.000000] Normal 1048576 -> 1048576
[ 0.000000] early_node_map[2] active PFN ranges
[ 0.000000] 0: 0 -> 157
[ 0.000000] 0: 256 -> 261888
[ 0.000000] On node 0 totalpages: 261789
[ 0.000000] DMA zone: 56 pages used for memmap
[ 0.000000] DMA zone: 1359 pages reserved
[ 0.000000] DMA zone: 2582 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 3524 pages used for memmap
[ 0.000000] DMA32 zone: 254268 pages, LIFO batch:31
[ 0.000000] Normal zone: 0 pages used for memmap
[ 0.000000] ACPI: PM-Timer IO Port: 0x1008
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[ 0.000000] Processor #0 (Bootup-CPU)
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
[ 0.000000] Processor #1
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[ 0.000000] ACPI: Skipping IOAPIC probe due to 'noapic' option.
[ 0.000000] Using ACPI for processor (LAPIC) configuration information
[ 0.000000] Intel MultiProcessor Specification v1.4
[ 0.000000] MPTABLE: OEM ID: nVIDIA MPTABLE: Product ID: C51-MCP51
MPTABLE: APIC at: 0xFEE00000
[ 0.000000] I/O APIC #2 at 0xFEC00000.
[ 0.000000] Setting APIC routing to physical flat
[ 0.000000] Processors: 2
[ 0.000000] Nosave address range: 000000000009d000 - 000000000009e000
[ 0.000000] Nosave address range: 000000000009e000 - 00000000000a0000
[ 0.000000] Nosave address range: 00000000000a0000 - 00000000000d2000
[ 0.000000] Nosave address range: 00000000000d2000 - 0000000000100000
[ 0.000000] Allocating PCI resources starting at 50000000 (gap:
40000000:a0000000)
[ 0.000000] SMP: Allowing 2 CPUs, 0 hotplug CPUs
[ 0.000000] PERCPU: Allocating 33920 bytes of per cpu data
[ 0.000000] Built 1 zonelists. Total pages: 256850
[ 0.000000] Kernel command line: root=/dev/sda2 noapic
[ 0.000000] Initializing CPU#0
[ 0.000000] PID hash table entries: 4096 (order: 12, 32768 bytes)
[ 16.936865] Console: colour VGA+ 80x25
[ 16.940343] Dentry cache hash table entries: 131072 (order: 8, 1048576 bytes)
[ 16.941525] Inode-cache hash table entries: 65536 (order: 7, 524288 bytes)
[ 16.941971] Checking aperture...
[ 16.942030] CPU 0: aperture @ 340000000 size 32 MB
[ 16.942087] Aperture too small (32 MB)
[ 16.949116] No AGP bridge found
[ 16.961484] Memory: 1025716k/1047552k available (2674k kernel code, 21440k
reserved, 1789k data, 308k init)
[ 17.040643] Calibrating delay using timer specific routine.. 3217.76 BogoMIPS
(lpj=6435520)
[ 17.040812] Security Framework v1.0.0 initialized
[ 17.040871] SELinux: Disabled at boot.
[ 17.040951] Mount-cache hash table entries: 256
[ 17.041145] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
[ 17.041206] CPU: L2 Cache: 256K (64 bytes/line)
[ 17.041264] CPU 0/0 -> Node 0
[ 17.041318] CPU: Physical Processor ID: 0
[ 17.041374] CPU: Processor Core ID: 0
[ 17.041450] SMP alternatives: switching to UP code
[ 17.041635] ACPI: Core revision 20060707
[ 17.047820] ACPI: setting ELCR to 0200 (from 0ca0)
[ 17.255779] Using local APIC timer interrupts.
[ 17.318044] result 12557334
[ 17.318098] Detected 12.557 MHz APIC timer.
[ 17.320875] SMP alternatives: switching to SMP code
[ 17.321061] Booting processor 1/2 APIC 0x1
[ 17.331598] Initializing CPU#1
[ 17.332849] spurious 8259A interrupt: IRQ7.
[ 17.408847] Calibrating delay using timer specific routine.. 3220.87 BogoMIPS
(lpj=6441748)
[ 17.408855] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
[ 17.408857] CPU: L2 Cache: 256K (64 bytes/line)
[ 17.408860] CPU 1/1 -> Node 0
[ 17.408863] CPU: Physical Processor ID: 0
[ 17.408864] CPU: Processor Core ID: 1
[ 17.408932] AMD Turion(tm) 64 X2 Mobile Technology TL-50 stepping 02
[ 17.412871] CPU 1: Syncing TSC to CPU 0.
[ 17.412751] CPU 1: synchronized TSC with CPU 0 (last diff -7 cycles, maxerr
480 cycles)
[ 17.412767] Brought up 2 CPUs
[ 17.413402] testing NMI watchdog ... OK.
[ 17.453573] Disabling vsyscall due to use of PM timer
[ 17.453631] time.c: Using 3.579545 MHz WALL PM GTOD PM timer.
[ 17.453689] time.c: Detected 1607.337 MHz processor.
[ 17.461141] migration_cost=62
[ 17.461738] NET: Registered protocol family 16
[ 17.461888] ACPI: bus type pci registered
[ 17.465996] PCI: Using MMCONFIG at e0000000
[ 17.466085] PCI: No mmconfig possible on device 00:18
[ 17.466325] PCI: No mmconfig possible on device 07:05
[ 17.472990] ACPI: Interpreter enabled
[ 17.473050] ACPI: Using PIC for interrupt routing
[ 17.474230] ACPI: PCI Root Bridge [PCI0] (0000:00)
[ 17.474296] PCI: Probing PCI hardware (bus 00)
[ 17.474511] ACPI: Assume root bridge [\_SB_.PCI0] bus is 0
[ 17.477109] Boot video device is 0000:05:00.0
[ 17.477416] PCI: Transparent bridge - 0000:00:10.0
[ 17.477507] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 17.519613] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P2P0._PRT]
[ 17.520803] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.XVR0._PRT]
[ 17.521158] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.XVR1._PRT]
[ 17.521369] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.XVR2._PRT]
[ 17.521788] ACPI: PCI Interrupt Link [LNK1] (IRQs 5 7 9 10 11 14 15) *0,
disabled.
[ 17.522671] ACPI: PCI Interrupt Link [LNK2] (IRQs 5 7 9 10 *11 14 15)
[ 17.523455] ACPI: PCI Interrupt Link [LNK3] (IRQs 5 7 9 10 *11 14 15)
[ 17.524247] ACPI: PCI Interrupt Link [LNK4] (IRQs 5 7 9 10 11 14 15) *0,
disabled.
[ 17.525142] ACPI: PCI Interrupt Link [LK1E] (IRQs 5 7 9 10 *11 14 15)
[ 17.525926] ACPI: PCI Interrupt Link [LK2E] (IRQs 5 7 9 10 11 14 15) *0,
disabled.
[ 17.526798] ACPI: PCI Interrupt Link [LK3E] (IRQs 5 7 9 10 11 14 15) *0,
disabled.
[ 17.527673] ACPI: PCI Interrupt Link [LK4E] (IRQs 5 7 9 10 11 14 15) *0,
disabled.
[ 17.528547] ACPI: PCI Interrupt Link [LSMB] (IRQs 5 7 9 *10 11 14 15)
[ 17.529354] ACPI: PCI Interrupt Link [LPMU] (IRQs 5 7 9 *10 11 14 15)
[ 17.530141] ACPI: PCI Interrupt Link [LUS0] (IRQs 5 7 9 10 *11 14 15)
[ 17.530926] ACPI: PCI Interrupt Link [LUS2] (IRQs 5 *7 9 10 11 14 15)
[ 17.531711] ACPI: PCI Interrupt Link [LMAC] (IRQs 5 7 9 *10 11 14 15)
[ 17.532495] ACPI: PCI Interrupt Link [LAZA] (IRQs 5 7 9 10 11 14 15) *0,
disabled.
[ 17.533391] ACPI: PCI Interrupt Link [LACI] (IRQs 5 7 9 10 11 14 15) *0,
disabled.
[ 17.534266] ACPI: PCI Interrupt Link [LMCI] (IRQs 5 7 9 10 11 14 15) *0,
disabled.
[ 17.535139] ACPI: PCI Interrupt Link [LPID] (IRQs 5 7 9 10 11 14 15) *0,
disabled.
[ 17.536029] ACPI: PCI Interrupt Link [LTID] (IRQs *5 7 9 10 11 14 15)
[ 17.536834] ACPI: PCI Interrupt Link [LSI1] (IRQs 5 7 9 *10 11 14 15),
disabled.
[ 17.537446] Linux Plug and Play Support v0.97 (c) Adam Belay
[ 17.537514] pnp: PnP ACPI init
[ 17.540481] pnp: PnP ACPI: found 11 devices
[ 17.540778] SCSI subsystem initialized
[ 17.540897] libata version 2.00 loaded.
[ 17.540942] PCI: Using ACPI for IRQ routing
[ 17.541000] PCI: If a device doesn't work, try "pci=routeirq". If it helps,
post a report
[ 17.541232] PCI-DMA: Disabling IOMMU.
[ 17.541948] pnp: 00:03: ioport range 0x1000-0x107f could not be reserved
[ 17.542009] pnp: 00:03: ioport range 0x1080-0x10ff has been reserved
[ 17.542069] pnp: 00:03: ioport range 0x1400-0x147f has been reserved
[ 17.542130] pnp: 00:03: ioport range 0x1480-0x14ff could not be reserved
[ 17.542190] pnp: 00:03: ioport range 0x1800-0x187f has been reserved
[ 17.542250] pnp: 00:03: ioport range 0x1880-0x18ff has been reserved
[ 17.542310] pnp: 00:03: ioport range 0x2000-0x203f has been reserved
[ 17.542674] PCI: Bridge: 0000:00:02.0
[ 17.542730] IO window: 4000-4fff
[ 17.542787] MEM window: c0200000-c03fffff
[ 17.542844] PREFETCH window: c3200000-c33fffff
[ 17.542901] PCI: Bridge: 0000:00:03.0
[ 17.542956] IO window: disabled.
[ 17.543012] MEM window: c0400000-c05fffff
[ 17.543068] PREFETCH window: disabled.
[ 17.543127] PCI: Failed to allocate mem resource #6:[EMAIL PROTECTED] for
0000:05:00.0
[ 17.543198] PCI: Bridge: 0000:00:04.0
[ 17.543252] IO window: disabled.
[ 17.543308] MEM window: c1000000-c2ffffff
[ 17.543365] PREFETCH window: d0000000-dfffffff
[ 17.543423] PCI: Bridge: 0000:00:10.0
[ 17.543478] IO window: disabled.
[ 17.543535] MEM window: c3000000-c30fffff
[ 17.543591] PREFETCH window: disabled.
[ 17.543654] PCI: Setting latency timer of device 0000:00:02.0 to 64
[ 17.543661] PCI: Setting latency timer of device 0000:00:03.0 to 64
[ 17.543666] PCI: Setting latency timer of device 0000:00:04.0 to 64
[ 17.543673] PCI: Setting latency timer of device 0000:00:10.0 to 64
[ 17.543772] NET: Registered protocol family 2
[ 17.588687] IP route cache hash table entries: 32768 (order: 6, 262144 bytes)
[ 17.588972] TCP established hash table entries: 131072 (order: 9, 2097152
bytes)
[ 17.590552] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 17.591307] TCP: Hash tables configured (established 131072 bind 65536)
[ 17.591369] TCP reno registered
[ 17.591640] Simple Boot Flag at 0x36 set to 0x1
[ 17.592354] audit: initializing netlink socket (disabled)
[ 17.592429] audit(1165532994.392:1): initialized
[ 17.592746] VFS: Disk quotas dquot_6.5.1
[ 17.592827] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 17.593000] io scheduler noop registered
[ 17.593096] io scheduler anticipatory registered
[ 17.593192] io scheduler deadline registered
[ 17.593302] io scheduler cfq registered (default)
[ 17.809074] PCI: Setting latency timer of device 0000:00:02.0 to 64
[ 17.809079] pcie_portdrv_probe->Dev[02fc:10de] has invalid IRQ. Check vendor
BIOS
[ 17.809166] assign_interrupt_mode Found MSI capability
[ 17.809258] Allocate Port Service[0000:00:02.0:pcie00]
[ 17.809301] Allocate Port Service[0000:00:02.0:pcie03]
[ 17.809359] PCI: Setting latency timer of device 0000:00:03.0 to 64
[ 17.809363] pcie_portdrv_probe->Dev[02fd:10de] has invalid IRQ. Check vendor
BIOS
[ 17.809445] assign_interrupt_mode Found MSI capability
[ 17.809516] Allocate Port Service[0000:00:03.0:pcie00]
[ 17.809554] Allocate Port Service[0000:00:03.0:pcie03]
[ 17.809610] PCI: Setting latency timer of device 0000:00:04.0 to 64
[ 17.809613] pcie_portdrv_probe->Dev[02fb:10de] has invalid IRQ. Check vendor
BIOS
[ 17.809696] assign_interrupt_mode Found MSI capability
[ 17.809766] Allocate Port Service[0000:00:04.0:pcie00]
[ 17.809801] Allocate Port Service[0000:00:04.0:pcie03]
[ 17.843328] Real Time Clock Driver v1.12ac
[ 17.843428] Linux agpgart interface v0.101 (c) Dave Jones
[ 17.844954] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing
enabled
[ 17.846651] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024
blocksize
[ 17.846823] Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
[ 17.846884] ide: Assuming 33MHz system bus speed for PIO modes; override with
idebus=xx
[ 17.847001] NFORCE-MCP51: IDE controller at PCI slot 0000:00:0d.0
[ 17.847075] NFORCE-MCP51: chipset revision 241
[ 17.847132] NFORCE-MCP51: not 100% native mode: will probe irqs later
[ 17.847192] NFORCE-MCP51: BIOS didn't set cable bits correctly. Enabling
workaround.
[ 17.847264] NFORCE-MCP51: 0000:00:0d.0 (rev f1) UDMA133 controller
[ 17.847327] ide0: BM-DMA at 0x3080-0x3087, BIOS settings: hda:DMA,
hdb:pio
[ 17.847483] Probing IDE interface ide0...
[ 18.580643] hda: MATSHITADVD-RAM UJ-850S, ATAPI CD/DVD-ROM drive
[ 18.917166] ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
[ 18.917591] Probing IDE interface ide1...
[ 19.481584] hda: ATAPI 24X DVD-ROM DVD-R-RAM CD-R/RW drive, 2048kB Cache,
(U)DMA
[ 19.481978] Uniform CD-ROM driver Revision: 3.20
[ 19.485458] st: Version 20050830, fixed bufsize 32768, s/g segs 256
[ 19.485557] osst :I: Tape driver with OnStream support version 0.99.4
[ 19.485559] osst :I: $Id: osst.c,v 1.73 2005/01/01 21:13:34 wriede Exp $
[ 19.485782] SCSI Media Changer driver v0.25
[ 19.485945] sata_nv 0000:00:0e.0: version 2.0
[ 19.485956] PCI: Enabling device 0000:00:0e.0 (0005 -> 0007)
[ 19.486371] ACPI: PCI Interrupt Link [LTID] enabled at IRQ 5
[ 19.486430] PCI: setting IRQ 5 as level-triggered
[ 19.486435] ACPI: PCI Interrupt 0000:00:0e.0[A] -> Link [LTID] -> GSI 5
(level, low) -> IRQ 5
[ 19.486694] PCI: Setting latency timer of device 0000:00:0e.0 to 64
[ 19.486771] ata1: SATA max UDMA/133 cmd 0x30C0 ctl 0x30B6 bmdma 0x3090 irq 5
[ 19.486860] ata2: SATA max UDMA/133 cmd 0x30B8 ctl 0x30B2 bmdma 0x3098 irq 5
[ 19.486930] scsi0 : sata_nv
[ 19.952452] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 19.953996] ata1.00: ATA-7, max UDMA/100, 195371568 sectors: LBA48
[ 19.954056] ata1.00: ata1: dev 0 multi count 16
[ 19.955874] ata1.00: configured for UDMA/100
[ 19.955934] scsi1 : sata_nv
[ 20.264407] ata2: SATA link down (SStatus 0 SControl 300)
[ 20.275080] ATA: abnormal status 0x7F on port 0x30BF
[ 20.275237] scsi 0:0:0:0: Direct-Access ATA ST9100824AS 7.24
PQ: 0 ANSI: 5
[ 20.275417] SCSI device sda: 195371568 512-byte hdwr sectors (100030 MB)
[ 20.275488] sda: Write Protect is off
[ 20.275543] sda: Mode Sense: 00 3a 00 00
[ 20.275562] SCSI device sda: drive cache: write back
[ 20.275664] SCSI device sda: 195371568 512-byte hdwr sectors (100030 MB)
[ 20.275731] sda: Write Protect is off
[ 20.275786] sda: Mode Sense: 00 3a 00 00
[ 20.275804] SCSI device sda: drive cache: write back
[ 20.275863] sda: sda1 sda2 sda3
[ 20.286828] sd 0:0:0:0: Attached scsi disk sda
[ 20.286960] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 20.287105] pd: pd version 1.05, major 45, cluster 64, nice 0
[ 20.287201] pda: Autoprobe failed
[ 20.287256] pd: no valid drive found
[ 20.287322] pcd: pcd version 1.07, major 46, nice 0
[ 20.287408] pcd0: Autoprobe failed
[ 20.287463] pcd: No CD-ROM drive found
[ 20.287527] pf: pf version 1.04, major 47, cluster 64, nice 0
[ 20.287585] pf: No ATAPI disk detected
[ 20.287643] pg: pg version 1.02, major 97
[ 20.287727] pga: Autoprobe failed
[ 20.287782] pg: No ATAPI device detected
[ 20.287916] PNP: PS/2 Controller [PNP0303:KBC0,PNP0f13:MSE0] at 0x60,0x64 irq
1,12
[ 20.304171] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 20.304231] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 20.304436] mice: PS/2 mouse device common for all mice
[ 20.305914] TCP cubic registered
[ 20.305977] NET: Registered protocol family 1
[ 20.306039] NET: Registered protocol family 8
[ 20.306095] NET: Registered protocol family 20
[ 20.306272] ACPI: (supports S0 S3 S4 S5)
[ 20.306577] drivers/rtc/hctosys.c: unable to open rtc device (rtc0)
[ 20.317413] input: AT Translated Set 2 keyboard as /class/input/input0
[ 20.451919] kjournald starting. Commit interval 5 seconds
[ 20.451987] EXT3-fs: mounted filesystem with ordered data mode.
[ 20.452103] VFS: Mounted root (ext3 filesystem) readonly.
[ 20.452245] Freeing unused kernel memory: 308k freed
[ 30.931824] usbcore: registered new interface driver usbfs
[ 30.932553] usbcore: registered new interface driver hub
[ 30.933272] usbcore: registered new device driver usb
[ 30.973733] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 30.985064] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 31.152699] ACPI: PCI Interrupt Link [LUS2] enabled at IRQ 7
[ 31.152761] PCI: setting IRQ 7 as level-triggered
[ 31.152766] ACPI: PCI Interrupt 0000:00:0b.1[B] -> Link [LUS2] -> GSI 7
(level, low) -> IRQ 7
[ 31.153018] PCI: Setting latency timer of device 0000:00:0b.1 to 64
[ 31.153024] ehci_hcd 0000:00:0b.1: EHCI Host Controller
[ 31.153498] ehci_hcd 0000:00:0b.1: new USB bus registered, assigned bus
number 1
[ 31.153604] ehci_hcd 0000:00:0b.1: debug port 1
[ 31.153662] PCI: cache line size of 64 is not supported by device
0000:00:0b.1
[ 31.153672] ehci_hcd 0000:00:0b.1: irq 7, io mem 0xc0005000
[ 31.153737] ehci_hcd 0000:00:0b.1: USB 2.0 started, EHCI 1.00, driver 10 Dec
2004
[ 31.153953] usb usb1: configuration #1 chosen from 1 choice
[ 31.154052] hub 1-0:1.0: USB hub found
[ 31.154113] hub 1-0:1.0: 8 ports detected
[ 31.218092] ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI)
Driver (PCI)
[ 31.259522] ACPI: PCI Interrupt Link [LUS0] enabled at IRQ 11
[ 31.259602] PCI: setting IRQ 11 as level-triggered
[ 31.259607] ACPI: PCI Interrupt 0000:00:0b.0[A] -> Link [LUS0] -> GSI 11
(level, low) -> IRQ 11
[ 31.259867] PCI: Setting latency timer of device 0000:00:0b.0 to 64
[ 31.259873] ohci_hcd 0000:00:0b.0: OHCI Host Controller
[ 31.260033] ohci_hcd 0000:00:0b.0: new USB bus registered, assigned bus
number 2
[ 31.260122] ohci_hcd 0000:00:0b.0: irq 11, io mem 0xc0004000
[ 31.321037] usb usb2: configuration #1 chosen from 1 choice
[ 31.321130] hub 2-0:1.0: USB hub found
[ 31.321196] hub 2-0:1.0: 8 ports detected
[ 31.371829] input: PC Speaker as /class/input/input1
[ 31.392769] forcedeth.c: Reverse Engineered nForce ethernet driver. Version
0.57.
[ 31.427187] i2c_adapter i2c-0: nForce2 SMBus adapter at 0x3040
[ 31.427275] i2c_adapter i2c-1: nForce2 SMBus adapter at 0x3000
[ 31.427758] ACPI: PCI Interrupt Link [LMAC] enabled at IRQ 10
[ 31.427822] PCI: setting IRQ 10 as level-triggered
[ 31.427827] ACPI: PCI Interrupt 0000:00:14.0[A] -> Link [LMAC] -> GSI 10
(level, low) -> IRQ 10
[ 31.427982] PCI: Setting latency timer of device 0000:00:14.0 to 64
[ 31.427990] forcedeth: using HIGHDMA
[ 31.495543] usb 1-4: new high speed USB device using ehci_hcd and address 2
[ 31.637533] usb 1-4: configuration #1 chosen from 1 choice
[ 31.682257] sdhci: Secure Digital Host Controller Interface driver, 0.12
[ 31.682320] sdhci: Copyright(c) Pierre Ossman
[ 31.775659] ieee1394: Initialized config rom entry `ip1394'
[ 31.951122] eth0: forcedeth.c: subsystem: 0103c:30b7 bound to 0000:00:14.0
[ 31.951909] ACPI: PCI Interrupt Link [LNK1] enabled at IRQ 11
[ 31.951974] ACPI: PCI Interrupt 0000:07:05.0[A] -> Link [LNK1] -> GSI 11
(level, low) -> IRQ 11
[ 32.004369] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[11]
MMIO=[c3000000-c30007ff] Max Packet=[2048] IR/IT contexts=[4/4]
[ 32.009017] ACPI: PCI Interrupt Link [LAZA] enabled at IRQ 10
[ 32.009080] ACPI: PCI Interrupt 0000:00:10.1[B] -> Link [LAZA] -> GSI 10
(level, low) -> IRQ 10
[ 32.009355] PCI: Setting latency timer of device 0000:00:10.1 to 64
[ 32.020595] eth1: no link during initialization.
[ 32.379739] sdhci: SDHCI controller found at 0000:07:05.1 [1180:0822] (rev
19)
[ 32.380205] ACPI: PCI Interrupt Link [LNK2] enabled at IRQ 11
[ 32.380265] ACPI: PCI Interrupt 0000:07:05.1[B] -> Link [LNK2] -> GSI 11
(level, low) -> IRQ 11
[ 32.380650] mmc0: SDHCI at 0xc3000800 irq 11 DMA
[ 32.560730] lp: driver loaded but no devices found
[ 32.566931] Synaptics Touchpad, model: 1, fw: 6.3, id: 0x1a0b1, caps:
0xa04713/0x200000
[ 32.589692] ieee1394: sbp2: Driver forced to serialize I/O (serialize_io=1)
[ 32.589755] ieee1394: sbp2: Try serialize_io=0 for better performance
[ 32.634603] input: SynPS/2 Synaptics TouchPad as /class/input/input2
[ 32.812355] EXT3 FS on sda2, internal journal
[ 33.050177] NTFS driver 2.1.27 [Flags: R/O MODULE].
[ 33.075749] eth1: link up.
[ 33.090794] NET: Registered protocol family 17
[ 33.156877] NTFS volume version 3.1.
[ 33.193673] NTFS volume version 3.1.
[ 33.282933] ieee1394: Host added: ID:BUS[0-00:1023] GUID[009fc000f9cdad00]
[ 35.356122] NET: Registered protocol family 10
[ 35.356235] lo: Disabled Privacy Extensions
[ 35.724722] ACPI: AC Adapter [ACAD] (on-line)
[ 35.776287] ACPI: Battery Slot [BAT0] (battery present)
[ 35.799290] ACPI: Power Button (FF) [PWRF]
[ 35.799302] ACPI: Power Button (CM) [PWRB]
[ 35.799310] ACPI: Sleep Button (CM) [SLPB]
[ 35.799318] ACPI: Lid Switch [LID]
[ 36.558966] Using specific hotkey driver
[ 37.024832] ibm_acpi: ec object not found
[ 38.589351] ACPI: Thermal Zone [THRM] (55 C)
[ 38.601592] toshiba_acpi: Unknown parameter `hotkeys_over_acpi'
[ 38.614540] ACPI: Video Device [UVGA] (multi-head: yes rom: no post: no)
[ 38.614690] ACPI: Video Device [VGA] (multi-head: yes rom: no post: no)
[ 38.875911] powernow-k8: Found 2 AMD Turion(tm) 64 X2 Mobile Technology TL-50
processors (version 2.00.00)
[ 38.876046] powernow-k8: 0 : fid 0x8 (1600 MHz), vid 0x12
[ 38.876051] powernow-k8: 1 : fid 0x0 (800 MHz), vid 0x1e
[ 44.771650] Bluetooth: Core ver 2.11
[ 44.771712] NET: Registered protocol family 31
[ 44.771715] Bluetooth: HCI device and connection manager initialized
[ 44.771719] Bluetooth: HCI socket layer initialized
[ 44.793624] Bluetooth: L2CAP ver 2.8
[ 44.793629] Bluetooth: L2CAP socket layer initialized
[ 44.863541] Bluetooth: RFCOMM socket layer initialized
[ 44.863557] Bluetooth: RFCOMM TTY layer initialized
[ 44.863560] Bluetooth: RFCOMM ver 1.8
[ 46.306369] eth1: no IPv6 routers present
[ 184.539035] irq 7: nobody cared (try booting with the "irqpoll" option)
[ 184.539042]
[ 184.539044] Call Trace:
[ 184.539047] <IRQ> [<ffffffff802c02f5>] __report_bad_irq+0x35/0x90
[ 184.539070] [<ffffffff802c0570>] note_interrupt+0x220/0x280
[ 184.539097] [<ffffffff88007505>] :usbcore:usb_hcd_irq+0x25/0x60
[ 184.539105] [<ffffffff802c1263>] handle_level_irq+0xe3/0x140
[ 184.539111] [<ffffffff8026624c>] call_softirq+0x1c/0x28
[ 184.539118] [<ffffffff8027431a>] do_IRQ+0x8a/0xe0
[ 184.539123] [<ffffffff80272940>] default_idle+0x0/0x50
[ 184.539129] [<ffffffff80265641>] ret_from_intr+0x0/0xa
[ 184.539132] <EOI> [<ffffffff80272969>] default_idle+0x29/0x50
[ 184.539147] [<ffffffff8024bf5a>] cpu_idle+0x9a/0xd0
[ 184.539154] [<ffffffff8027ea95>] start_secondary+0x4d5/0x4f0
[ 184.539172]
[ 184.539173] handlers:
[ 184.539176] [<ffffffff880074e0>] (usb_hcd_irq+0x0/0x60 [usbcore])
[ 184.539194] Disabling IRQ #7
[EMAIL PROTECTED]:~$ cat /proc/interrupts
CPU0 CPU1
0: 176820 10158 XT-PIC-XT timer
1: 2645 99 XT-PIC-XT i8042
2: 0 0 XT-PIC-XT cascade
5: 6491 468 XT-PIC-XT libata
7: 24310 374010 XT-PIC-XT ehci_hcd:usb1
8: 0 0 XT-PIC-XT rtc
9: 370 36 XT-PIC-XT acpi
10: 76180 5337 XT-PIC-XT HDA Intel, eth1
11: 1 2 XT-PIC-XT ohci_hcd:usb2, ohci1394,
sdhci:slot0
12: 105563 8309 XT-PIC-XT i8042
14: 6190 379 XT-PIC-XT ide0
NMI: 107 80
LOC: 186954 186933
ERR: 299041
------- You are receiving this mail because: -------
You are on the CC list for the bug, or are watching someone who is.
-------------------------------------------------------------------------
Take Surveys. Earn Cash. Influence the Future of IT
Join SourceForge.net's Techsay panel and you'll get the chance to share your
opinions on IT & business topics through brief surveys - and earn cash
http://www.techsay.com/default.php?page=join.php&p=sourceforge&CID=DEVDEV
_______________________________________________
acpi-bugzilla mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/acpi-bugzilla
