http://bugzilla.kernel.org/show_bug.cgi?id=8860
------- Comment #10 from [EMAIL PROTECTED] 2007-08-15 11:50 ------- I have added CONFIG_CPU_FREQ_DEBUG (as well as ACPI debug) options to kernel 2.6.23 and rebooted with added line cpufreq.debug=7... Btw, there are still wrongly reported CPU speed while it is 3.2 and I may prove it works faster... (For sure, I have rebooted in the stock mode with the same results) There are results: # dmesg|egrep -i "(acpi|cpufreq)" Command line: root=/dev/ram0 init=/linuxrc ramdisk=8192 real_root=/dev/sda7 cpufreq.debug=7 BIOS-e820: 000000007ee72000 - 000000007ef00000 (ACPI NVS) BIOS-e820: 000000007feab000 - 000000007feac000 (ACPI data) BIOS-e820: 000000007feac000 - 000000007fef0000 (ACPI NVS) BIOS-e820: 000000007fef0000 - 000000007fef4000 (ACPI data) BIOS-e820: 000000007fef5000 - 000000007feff000 (ACPI data) ACPI: RSDP 000FE020, 0014 (r0 INTEL ) ACPI: RSDT 7FEFD038, 0048 (r1 INTEL D975XBX2 AD2 1000013) ACPI: FACP 7FEFC000, 0074 (r1 INTEL D975XBX2 AD2 MSFT 1000013) ACPI: DSDT 7FEF8000, 3F11 (r1 INTEL D975XBX2 AD2 MSFT 1000013) ACPI: FACS 7FEAC000, 0040 ACPI: APIC 7FEF7000, 0078 (r1 INTEL D975XBX2 AD2 MSFT 1000013) ACPI: WDDT 7FEF6000, 0040 (r1 INTEL D975XBX2 AD2 MSFT 1000013) ACPI: MCFG 7FEF5000, 003C (r1 INTEL D975XBX2 AD2 MSFT 1000013) ACPI: SSDT 7FEF3000, 01BC (r1 INTEL CpuPm AD2 MSFT 1000013) ACPI: SSDT 7FEF2000, 0175 (r1 INTEL Cpu0Ist AD2 MSFT 1000013) ACPI: SSDT 7FEF1000, 0175 (r1 INTEL Cpu1Ist AD2 MSFT 1000013) ACPI: SSDT 7FEF0000, 0175 (r1 INTEL Cpu2Ist AD2 MSFT 1000013) ACPI: SSDT 7FEAB000, 0175 (r1 INTEL Cpu3Ist AD2 MSFT 1000013) ACPI: Local APIC address 0xfee00000 ACPI: PM-Timer IO Port: 0x408 ACPI: Local APIC address 0xfee00000 ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled) ACPI: LAPIC (acpi_id[0x03] lapic_id[0x82] disabled) ACPI: LAPIC (acpi_id[0x04] lapic_id[0x83] disabled) ACPI: LAPIC_NMI (acpi_id[0x01] dfl dfl lint[0x1]) ACPI: LAPIC_NMI (acpi_id[0x02] dfl dfl lint[0x1]) ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) ACPI: IRQ0 used by override. ACPI: IRQ2 used by override. ACPI: IRQ9 used by override. Using ACPI (MADT) for SMP configuration information Kernel command line: root=/dev/ram0 init=/linuxrc ramdisk=8192 real_root=/dev/sda7 cpufreq.debug=7 ACPI: Core revision 20070126 tbxface-0598 [00] tb_load_namespace : ACPI Tables successfully acquired evxfevnt-0091 [00] enable : Transition to ACPI mode successful ACPI: bus type pci registered ACPI: EC: Look up EC in DSDT ACPI: Interpreter enabled ACPI: (supports S0 S1 S3) ACPI: Using IOAPIC for interrupt routing PCI: BIOS Bug: MCFG area at f0000000 is not reserved in ACPI motherboard resources PM: Adding info for acpi:LNXSYSTM:00 PM: Adding info for acpi:LNXPWRBN:00 PM: Adding info for acpi:ACPI0007:00 PM: Adding info for acpi:ACPI0007:01 PM: Adding info for acpi:ACPI0007:02 PM: Adding info for acpi:ACPI0007:03 PM: Adding info for acpi:device:00 PM: Adding info for acpi:PNP0C0E:00 PM: Adding info for acpi:PNP0A03:00 PM: Adding info for acpi:PNP0C02:00 PM: Adding info for acpi:device:01 PM: Adding info for acpi:device:02 PM: Adding info for acpi:PNP0C0F:00 PM: Adding info for acpi:PNP0C0F:01 PM: Adding info for acpi:PNP0C0F:02 PM: Adding info for acpi:PNP0C0F:03 PM: Adding info for acpi:PNP0C0F:04 PM: Adding info for acpi:PNP0C0F:05 PM: Adding info for acpi:PNP0C0F:06 PM: Adding info for acpi:PNP0C0F:07 PM: Adding info for acpi:PNP0200:00 PM: Adding info for acpi:PNP0B00:00 PM: Adding info for acpi:PNP0000:00 PM: Adding info for acpi:PNP0C04:00 PM: Adding info for acpi:PNP0100:00 PM: Adding info for acpi:PNP0800:00 PM: Adding info for acpi:PNP0C02:01 PM: Adding info for acpi:PNP0C02:02 PM: Adding info for acpi:device:03 PM: Adding info for acpi:device:04 PM: Adding info for acpi:device:05 PM: Adding info for acpi:device:06 PM: Adding info for acpi:device:07 PM: Adding info for acpi:device:08 PM: Adding info for acpi:PNP0003:00 PM: Adding info for acpi:device:09 PM: Adding info for acpi:device:0a PM: Adding info for acpi:device:0b PM: Adding info for acpi:device:0c PM: Adding info for acpi:device:0d PM: Adding info for acpi:device:0e PM: Adding info for acpi:device:0f PM: Adding info for acpi:device:10 PM: Adding info for acpi:device:11 PM: Adding info for acpi:device:12 PM: Adding info for acpi:device:13 PM: Adding info for acpi:device:14 PM: Adding info for acpi:device:15 PM: Adding info for acpi:device:16 PM: Adding info for acpi:device:17 PM: Adding info for acpi:device:18 PM: Adding info for acpi:device:19 PM: Adding info for acpi:device:1a PM: Adding info for acpi:LNXTHERM:00 ACPI: PCI Root Bridge [PCI0] (0000:00) ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P32_._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX0._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX5._PRT] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 7 *9 10 11 12) ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 7 9 *10 11 12) ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 7 9 10 *11 12) ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 7 *9 10 11 12) ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 7 9 10 11 12) *0, disabled. ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 7 9 10 11 12) *0, disabled. ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 7 9 10 11 12) *0, disabled. ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 7 9 10 *11 12) pnp: PnP ACPI init ACPI: bus type pnp registered pnp: PnP ACPI: found 9 devices ACPI: ACPI bus type pnp unregistered PCI: Using ACPI for IRQ routing ACPI: PCI Interrupt 0000:04:04.0[A] -> GSI 18 (level, low) -> IRQ 18 ACPI: PCI Interrupt 0000:00:01.0[A] -> GSI 16 (level, low) -> IRQ 16 ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 17 (level, low) -> IRQ 17 ACPI: PCI Interrupt 0000:00:1c.5[B] -> GSI 16 (level, low) -> IRQ 16 ACPI: PCI Interrupt 0000:04:02.0[A] -> GSI 18 (level, low) -> IRQ 18 ACPI: Power Button (FF) [PWRF] ACPI: Sleep Button (CM) [SLPB] ACPI Exception (processor_core-0791): AE_NOT_FOUND, Processor Device is not present [20070126] ACPI Exception (processor_core-0791): AE_NOT_FOUND, Processor Device is not present [20070126] cpuidle: driver acpi_idle failed to attach to cpu 1 cpuidle: driver acpi_idle failed to attach to cpu 0 ACPI: PCI Interrupt 0000:00:1f.1[A] -> GSI 18 (level, low) -> IRQ 18 ACPI: PCI Interrupt 0000:01:00.0[A] -> GSI 16 (level, low) -> IRQ 16 ACPI: PCI Interrupt 0000:00:1f.2[B] -> <7>PM: Adding info for No Bus:target0:0:29 acpi-cpufreq: acpi_cpufreq_init acpi-cpufreq: acpi_cpufreq_early_init cpufreq-core: trying to register driver acpi-cpufreq cpufreq-core: adding CPU 0 acpi-cpufreq: acpi_cpufreq_cpu_init acpi-cpufreq: HARDWARE addr space acpi-cpufreq: get_cur_freq_on_cpu (0) acpi-cpufreq: get_cur_val = 100665380 acpi-cpufreq: cur freq = 2128000 acpi-cpufreq: CPU0 - ACPI performance management activated. acpi-cpufreq: *P0: 2128 MHz, 89000 mW, 10 uS acpi-cpufreq: P1: 1596 MHz, 55269 mW, 10 uS cpufreq-core: setting new policy for CPU 0: 1596000 - 2128000 kHz acpi-cpufreq: acpi_cpufreq_verify acpi-cpufreq: acpi_cpufreq_verify cpufreq-core: new min and max freqs are 1596000 - 2128000 kHz cpufreq-core: governor switch cpufreq-core: __cpufreq_governor for CPU 0, event 1 cpufreq-core: target for CPU 0: 2128000 kHz, relation 1 acpi-cpufreq: acpi_cpufreq_target 2128000 (0) acpi-cpufreq: Called after resume, resetting to P0 cpufreq-core: notification 0 of frequency transition to 2128000 kHz cpufreq-core: notification 1 of frequency transition to 2128000 kHz cpufreq-core: governor: change or update limits cpufreq-core: __cpufreq_governor for CPU 0, event 3 cpufreq-core: target for CPU 0: 2128000 kHz, relation 1 acpi-cpufreq: acpi_cpufreq_target 2128000 (0) acpi-cpufreq: Already at target state (P0) cpufreq-core: initialization complete cpufreq-core: adding CPU 1 acpi-cpufreq: acpi_cpufreq_cpu_init acpi-cpufreq: HARDWARE addr space acpi-cpufreq: get_cur_freq_on_cpu (1) acpi-cpufreq: get_cur_val = 100665380 acpi-cpufreq: cur freq = 2128000 acpi-cpufreq: CPU1 - ACPI performance management activated. acpi-cpufreq: *P0: 2128 MHz, 89000 mW, 10 uS acpi-cpufreq: P1: 1596 MHz, 55269 mW, 10 uS cpufreq-core: setting new policy for CPU 1: 1596000 - 2128000 kHz acpi-cpufreq: acpi_cpufreq_verify acpi-cpufreq: acpi_cpufreq_verify cpufreq-core: new min and max freqs are 1596000 - 2128000 kHz cpufreq-core: governor switch cpufreq-core: __cpufreq_governor for CPU 1, event 1 cpufreq-core: target for CPU 1: 2128000 kHz, relation 1 acpi-cpufreq: acpi_cpufreq_target 2128000 (1) acpi-cpufreq: Called after resume, resetting to P0 cpufreq-core: notification 0 of frequency transition to 2128000 kHz cpufreq-core: notification 1 of frequency transition to 2128000 kHz cpufreq-core: governor: change or update limits cpufreq-core: __cpufreq_governor for CPU 1, event 3 cpufreq-core: target for CPU 1: 2128000 kHz, relation 1 acpi-cpufreq: acpi_cpufreq_target 2128000 (1) acpi-cpufreq: Already at target state (P0) cpufreq-core: initialization complete cpufreq-core: driver acpi-cpufreq up and running cpufreq-core: trying to register driver centrino cpufreq-core: trying to register driver p4-clockmod ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 23 (level, low) -> IRQ 23 ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 23 (level, low) -> IRQ 23 ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 19 (level, low) -> IRQ 19 ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 18 ACPI: PCI Interrupt 0000:00:1d.3[D] -> GSI 16 (level, low) -> IRQ 16 ACPI: PCI Interrupt 0000:03:00.0[A] -> GSI 17 (level, low) -> IRQ 17 ACPI: PCI Interrupt 0000:00:1f.3[B] -> GSI 19 (level, low) -> IRQ 19 P.S. Please, let me know how to get acpidump output. -- Configure bugmail: http://bugzilla.kernel.org/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug, or are watching someone who is. ------------------------------------------------------------------------- This SF.net email is sponsored by: Splunk Inc. Still grepping through log files to find problems? Stop. Now Search log events and configuration files using AJAX and a browser. Download your FREE copy of Splunk now >> http://get.splunk.com/ _______________________________________________ acpi-bugzilla mailing list acpi-bugzilla@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/acpi-bugzilla
