http://bugzilla.kernel.org/show_bug.cgi?id=8034
------- Comment #23 from [EMAIL PROTECTED] 2007-09-18 18:24 -------
Arne, so, the harddrive is detected on 2.6.18 (SL102) but it doesn't get
detected if you upgrade the kernel to 2.6.22, right? This can be one of the
following two things.
1. Distro's initrd generation is messed up and fails to load sata_nv. In SL102
emergency shell, run "cat /proc/modules" and see whether sata_nv is there. If
not, run "insmod /lib/modules/{version}/kernel/drivers/ata/sata_nv.ko" and see
whether devices get detected.
2. Something went wrong with sata_nv or other component and sata_nv can't
detect the device anymore.
In any case, full boot log will be very helpful in determining what's going on.
If you have a second machine, setting up netconsole is usually the easiest way
(Documentation/networking/netconsole.txt) to get boot log. I'm not sure
whether this would work with root mount failure tho (module for network
interface should either be in the kernel or initrd).
--
Configure bugmail: http://bugzilla.kernel.org/userprefs.cgi?tab=email
------- You are receiving this mail because: -------
You are the assignee for the bug, or are watching the assignee.
-------------------------------------------------------------------------
This SF.net email is sponsored by: Microsoft
Defy all challenges. Microsoft(R) Visual Studio 2005.
http://clk.atdmt.com/MRT/go/vse0120000070mrt/direct/01/
_______________________________________________
acpi-bugzilla mailing list
acpi-bugzilla@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/acpi-bugzilla
