http://bugzilla.kernel.org/show_bug.cgi?id=9346
------- Comment #7 from [EMAIL PROTECTED] 2007-11-28 04:32 ------- (In reply to comment #6) > Created an attachment (id=13775) --> (http://bugzilla.kernel.org/attachment.cgi?id=13775&action=view) [details] > atapi-drain.patch > > Does this fix the problem? > unfortunately not, but one thing better k3b does not hang at start, then it does that while trying to erase cd: kdecore (KAction): WARNING: KActionCollection::KActionCollection( QObject *parent, const char *name, KInstance *instance ) (K3bDevice::HalConnection) initializing HAL >= 0.5 Mapping udi /org/freedesktop/Hal/devices/storage_model_DVD_DD_DW1640 to device /dev/scd0 /dev/scd0 resolved to /dev/scd0 /dev/scd0 is block device (0) /dev/scd0 seems to be cdrom bus: 0, id: 0, lun: 0 (K3bDevice::Device) /dev/scd0: init() (K3bDevice::Device) /dev/scd0 feature: CD Mastering (K3bDevice::Device) /dev/scd0 feature: CD Track At Once (K3bDevice::Device) /dev/scd0 feature: DVD Read (MMC5) (K3bDevice::Device) /dev/scd0 feature: DVD+R (K3bDevice::Device) /dev/scd0 feature: DVD+RW (K3bDevice::Device) /dev/scd0 feature: DVD+R Double Layer (K3bDevice::Device) /dev/scd0 feature: DVD-R/-RW Write (K3bDevice::Device) /dev/scd0 feature: Rigid Restricted Overwrite (K3bDevice::Device) /dev/scd0 feature: Layer Jump Recording (K3bDevice::Device) /dev/scd0: dataLen: 60 (K3bDevice::Device) /dev/scd0: checking for TAO (K3bDevice::Device) /dev/scd0: checking for SAO (K3bDevice::Device) /dev/scd0: checking for SAO_R96P (K3bDevice::ScsiCommand) failed: command: MODE SELECT (55) errorcode: 70 sense key: ILLEGAL REQUEST (5) asc: 26 ascq: 0 (K3bDevice::Device) /dev/scd0: checking for SAO_R96R (K3bDevice::Device) /dev/scd0: checking for RAW_R16 (K3bDevice::Device) /dev/scd0: checking for RAW_R96P (K3bDevice::ScsiCommand) failed: command: MODE SELECT (55) errorcode: 70 sense key: ILLEGAL REQUEST (5) asc: 26 ascq: 0 (K3bDevice::Device) /dev/scd0: checking for RAW_R96R (K3bDevice::DeviceManager) setting current write speed of device /dev/scd0 to 706 /dev/scd0 resolved to /dev/scd0 (K3bDevice::DeviceManager) dev /dev/scd0 already found (K3bDevice::DeviceManager) found config entry for devicetype: BENQ DVD DD DW1640 DiskInfo: Mediatype: CD-RW Current Profile: CD-RW Disk state: incomplete Empty: 0 Rewritable: 1 Appendable: 1 Sessions: 1 Tracks: 1 Layers: 1 Capacity: 79:57:74 (LBA 359849) (736970752 Bytes) Remaining size: 19:27:33 (LBA 87558) (179318784 Bytes) Used Size: 60:30:41 (LBA 272291) (557651968 Bytes) Session | ADR | CONTROL| TNO | POINT | Min | Sec | Frame | Zero | PMIN | PSEC | PFRAME | 1 | 1 | 4 | 0 | a0 | 97 | 10 | 0 | 0 | 1 | 32 | 0 | 1 | 1 | 4 | 0 | a1 | 97 | 10 | 6 | 0 | 1 | 0 | 0 | 1 | 1 | 4 | 0 | a2 | 97 | 10 | 12 | 0 | 60 | 0 | 41 | 1 | 1 | 4 | 0 | 1 | 97 | 10 | 0 | 0 | 0 | 2 | 0 | 1 | 5 | 4 | 0 | b0 | 62 | 30 | 41 | 3 | 79 | 59 | 74 | 1 | 5 | 4 | 0 | c0 | 209 | 0 | 132 | 0 | 97 | 10 | 0 | 1 | 5 | 0 | 0 | c1 | 2 | 74 | 176 | 0 | 0 | 0 | 0 | (K3bDevice::Device) found invalid bcd values. No bcd toc. Devices: ------------------------------ Blockdevice: /dev/scd0 Generic device: Vendor: BENQ Description: DVD DD DW1640 Version: BSRB Write speed: 0 Profiles: DVD-ROM, DVD-R séquentiel, DVD-R double couche séquentiel, DVD+R double couche à saut, DVD RW à réinscription limitée, DVD-RW séquentiel, DVD+RW, DVD+R, DVD+R double couche, CD-ROM, CD-R, CD-RW Read Cap: DVD-ROM, DVD-R, DVD-R séquentiel, DVD+R double couche, DVD-R double couche séquentiel, DVD+R double couche à saut, DVD-RW, DVD RW à réinscription limitée, DVD-RW séquentiel, DVD+RW, DVD+R, DVD+RW double couche, DVD+R double couche, CD-ROM, CD-R, CD-RW Write Cap: DVD-R, DVD-R séquentiel, DVD+R double couche, DVD-R double couche séquentiel, DVD+R double couche à saut, DVD-RW, DVD RW à réinscription limitée, DVD-RW séquentiel, DVD+RW, DVD+R, DVD+R double couche, CD-R, CD-RW Writing modes: SAO, TAO, RAW, SAO/R96R, RAW/R16, RAW/R96R, Réinscription restreinte, Saut de couche Reader aliases: /dev/scd0 ------------------------------ kdecore (KAction): WARNING: KActionCollection::operator+=(): function is severely deprecated. /dev/scd0: setting last sector of last track to 269890 (K3bDevice::Device) /dev/scd0: Number of supported write speeds via 2A: 1 (K3bDevice::Device) /dev/scd0 : 706 KB/s k3b: WARNING: Pixmap not found for mimetype inode/directory k3b: WARNING: Pixmap not found for mimetype inode/directory (K3bDevice::HalConnection) lock queued for /org/freedesktop/Hal/devices/storage_model_DVD_DD_DW1640 (K3bDevice::HalConnection) unlock queued for /org/freedesktop/Hal/devices/storage_model_DVD_DD_DW1640 Launched ok, pid = 4305 the syslog is : Nov 28 13:10:27 localhost kernel: ata1.00: qc timeout (cmd 0xa0) Nov 28 13:10:27 localhost kernel: ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen Nov 28 13:10:27 localhost kernel: ata1.00: cmd a0/00:00:00:02:00/00:00:00:00:00/a0 tag 0 cdb 0x5a data 2 in Nov 28 13:10:27 localhost kernel: res 51/54:03:00:02:00/00:00:00:00:00/a0 Emask 0x5 (timeout) Nov 28 13:10:27 localhost kernel: ata1.00: status: { DRDY ERR } Nov 28 13:10:32 localhost kernel: ata1: port is slow to respond, please be patient (Status 0x90) Nov 28 13:10:37 localhost kernel: ata1: device not ready (errno=-16), forcing hardreset Nov 28 13:10:37 localhost kernel: ata1: soft resetting link Nov 28 13:10:37 localhost kernel: ata1.00: revalidation failed (errno=-2) Nov 28 13:10:37 localhost kernel: ata1: failed to recover some devices, retrying in 5 secs Nov 28 13:10:42 localhost kernel: ata1: soft resetting link Nov 28 13:11:13 localhost kernel: ata1.00: qc timeout (cmd 0xa1) Nov 28 13:11:13 localhost kernel: ata1.00: failed to IDENTIFY (I/O error, err_mask=0x4) Nov 28 13:11:13 localhost kernel: ata1.00: revalidation failed (errno=-5) Nov 28 13:11:13 localhost kernel: ata1: failed to recover some devices, retrying in 5 secs Nov 28 13:11:23 localhost kernel: ata1: port is slow to respond, please be patient (Status 0x80) Nov 28 13:11:28 localhost kernel: ata1: device not ready (errno=-16), forcing hardreset Nov 28 13:11:28 localhost kernel: ata1: soft resetting link Nov 28 13:11:57 localhost ntpd[3755]: synchronized to 91.189.94.4, stratum 2 Nov 28 13:11:57 localhost ntpd[3755]: kernel time sync status change 0001 Nov 28 13:11:58 localhost kernel: ata1.00: qc timeout (cmd 0xa1) Nov 28 13:11:58 localhost kernel: ata1.00: failed to IDENTIFY (I/O error, err_mask=0x4) Nov 28 13:11:58 localhost kernel: ata1.00: revalidation failed (errno=-5) Nov 28 13:11:58 localhost kernel: ata1.00: disabled thanks anyway -- Configure bugmail: http://bugzilla.kernel.org/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug, or are watching someone who is. ------------------------------------------------------------------------- SF.Net email is sponsored by: The Future of Linux Business White Paper from Novell. From the desktop to the data center, Linux is going mainstream. Let it simplify your IT future. http://altfarm.mediaplex.com/ad/ck/8857-50307-18918-4 _______________________________________________ acpi-bugzilla mailing list acpi-bugzilla@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/acpi-bugzilla
