http://bugzilla.kernel.org/show_bug.cgi?id=9346
------- Comment #35 from [EMAIL PROTECTED] 2007-12-09 03:58 -------
here it is, after applying the patch (with some rejects)
and compiling the kernel
k3b start fast but during erase error:
System
-----------------------
K3b Version: 1.0.3
KDE Version: 3.5.8
QT Version: 3.3.7
Kernel: 2.6.24-rc4-yann8
Devices
-----------------------
BENQ DVD DD DW1640 BSRB (/dev/scd0, ) [CD-R, CD-RW, CD-ROM, DVD-ROM, DVD-R,
DVD-RW, DVD-R DL, DVD+R, DVD+RW, DVD+R DL] [DVD-ROM, DVD-R Sequential, DVD-R
Dual Layer Sequential, DVD-R Dual Layer Jump, DVD-RW Restricted Overwrite,
DVD-RW Sequential, DVD+RW, DVD+R, DVD+R Dual Layer, CD-ROM, CD-R, CD-RW] [SAO,
TAO, RAW, SAO/R96R, RAW/R16, RAW/R96R, Restricted Overwrite, Layer Jump]
Used versions
-----------------------
cdrecord: 1.1.6
cdrecord command:
-----------------------
/usr/bin/wodim -v gracetime=2 dev=/dev/scd0 speed=4 -tao driveropts=burnfree
-eject blank=all -force
cdrecord
-----------------------
/usr/bin/wodim: Operation not permitted. Warning: Cannot raise RLIMIT_MEMLOCK
limits.
scsidev: '/dev/scd0'
devname: '/dev/scd0'
scsibus: -2 target: -2 lun: -2
Linux sg driver version: 3.5.27
Wodim version: 1.1.6
SCSI buffer size: 64512
Beginning DMA speed test. Set CDR_NODMATEST environment variable if device
communication breaks or freezes immediately after that.
TOC Type: 1 = CD-ROM
Driveropts: 'burnfree'
Device type : Removable CD-ROM
Version : 5
Response Format: 2
Capabilities :
Vendor_info : 'BENQ '
Identification : 'DVD DD DW1640 '
Revision : 'BSRB'
Device seems to be: Generic mmc2 DVD-R/DVD-RW.
Current: 0x000A (CD-RW)
Profile: 0x002B (DVD+R/DL)
Profile: 0x001B (DVD+R)
Profile: 0x001A (DVD+RW)
Profile: 0x0016 (DVD-R/DL layer jump recording)
Profile: 0x0015 (DVD-R/DL sequential recording)
Profile: 0x0014 (DVD-RW sequential recording)
Profile: 0x0013 (DVD-RW restricted overwrite)
Profile: 0x0011 (DVD-R sequential recording)
Profile: 0x0010 (DVD-ROM)
Profile: 0x000A (CD-RW) (current)
Profile: 0x0009 (CD-R)
Profile: 0x0008 (CD-ROM)
Using generic SCSI-3/mmc CD-R/CD-RW driver (mmc_cdr).
Driver flags : MMC-3 SWABAUDIO BURNFREE
Supported modes: TAO PACKET SAO SAO/R96R RAW/R16 RAW/R96R
Drive buf size : 1073152 = 1048 KB
Speed set to 706 KB/s
Current Secsize: 2048
ATIP info from disk:
Indicated writing power: 5
Reference speed: 2
Is not unrestricted
Is erasable
ATIP start of lead in: -12900 (97:10/00)
ATIP start of lead out: 359849 (79:59/74)
1T speed low: 0 (reserved val 0) 1T speed high: 4
2T speed low: 0 (reserved val 5) 2T speed high: 0 (reserved val 12)
power mult factor: 4 5
recommended erase/write power: 3
A1 values: 02 4A B0
A2 values: 5C C6 26
Disk type: unknown dye (reserved id code)
Manuf. index: -1
Manufacturer: unknown (not in table)
Manufacturer is unknown because of the orange forum embargo.
As the orange forum likes to get money for recent information,
it may be that this media does not use illegal manufacturer coding.
Waiting for drive to calm down.
Starting to write CD/DVD at speed 4.0 in real force BLANK mode for single
session.
Last chance to quit, starting real write in 2 seconds.
1 seconds.
0 seconds. Operation starts.
Errno: 5 (Input/output error), blank unit scsi sendcmd: no error
CDB: A1 00 00 00 00 00 00 00 00 00 00 00
status: 0x2 (CHECK CONDITION)
Sense Bytes: 72 0B 00 00 00 00 00 0E 09 0C 00 00 00 02 00 00
Sense Key: 0x0 No Additional Sense, Segment 11
Sense Code: 0x00 Qual 0x02 (end-of-partition/medium detected) Fru 0x0
Sense flags: Blk 0 (not valid)
cmd finished after 1152.493s timeout 9600s
Starting to write CD/DVD at speed 4.0 in real force BLANK mode for single
session.
No chance to quit anymore. Operation starts.
Performing OPC...
/usr/bin/wodim: OPC failed.
/usr/bin/wodim: Cannot blank disk, aborting.
This drive or media does not support the 'BLANK media' command
Errno: 5 (Input/output error), prevent/allow medium removal scsi sendcmd: fatal
error
CDB: 1E 00 00 00 00 00
cmd finished after 0.000s timeout 40s
Errno: 5 (Input/output error), start/stop unit scsi sendcmd: fatal error
CDB: 1B 00 00 00 02 00
cmd finished after 0.000s timeout 40s
/usr/bin/wodim: Cannot eject media.
syslog :
Dec 9 12:47:14 tiyann kernel: ata5.00: exception Emask 0x0 SAct 0x0 SErr 0x0
action 0x2 frozen
Dec 9 12:47:14 tiyann kernel: ata5.00: cmd a0/00:00:00:00:00/00:00:00:00:00/a0
tag 0
Dec 9 12:47:14 tiyann kernel: cdb a1 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00
Dec 9 12:47:14 tiyann kernel: res 40/00:02:00:2c:00/00:00:00:00:00/a0
Emask 0x4 (timeout)
Dec 9 12:47:14 tiyann kernel: ata5.00: status: { DRDY }
Dec 9 12:47:19 tiyann kernel: ata5: port is slow to respond, please be patient
(Status 0x90)
Dec 9 12:47:24 tiyann kernel: ata5: device not ready (errno=-16), forcing
hardreset
Dec 9 12:47:24 tiyann kernel: ata5: soft resetting link
Dec 9 12:47:55 tiyann kernel: ata5.00: qc timeout (cmd 0xa1)
Dec 9 12:47:55 tiyann kernel: ata5.00: failed to IDENTIFY (I/O error,
err_mask=0x4)
Dec 9 12:47:55 tiyann kernel: ata5.00: revalidation failed (errno=-5)
Dec 9 12:47:55 tiyann kernel: ata5: failed to recover some devices, retrying
in 5 secs
Dec 9 12:48:05 tiyann kernel: ata5: port is slow to respond, please be patient
(Status 0x80)
Dec 9 12:48:10 tiyann kernel: ata5: device not ready (errno=-16), forcing
hardreset
Dec 9 12:48:10 tiyann kernel: ata5: soft resetting link
Dec 9 12:48:40 tiyann kernel: ata5.00: qc timeout (cmd 0xa1)
Dec 9 12:48:40 tiyann kernel: ata5.00: failed to IDENTIFY (I/O error,
err_mask=0x4)
Dec 9 12:48:40 tiyann kernel: ata5.00: revalidation failed (errno=-5)
Dec 9 12:48:40 tiyann kernel: ata5: failed to recover some devices, retrying
in 5 secs
Dec 9 12:48:50 tiyann kernel: ata5: port is slow to respond, please be patient
(Status 0x80)
Dec 9 12:48:55 tiyann kernel: ata5: device not ready (errno=-16), forcing
hardreset
Dec 9 12:48:55 tiyann kernel: ata5: soft resetting link
Dec 9 12:49:26 tiyann kernel: ata5.00: qc timeout (cmd 0xa1)
Dec 9 12:49:26 tiyann kernel: ata5.00: failed to IDENTIFY (I/O error,
err_mask=0x4)
Dec 9 12:49:26 tiyann kernel: ata5.00: revalidation failed (errno=-5)
Dec 9 12:49:26 tiyann kernel: ata5.00: disabled
Dec 9 12:49:31 tiyann kernel: ata5: port is slow to respond, please be patient
(Status 0x80)
Dec 9 12:49:36 tiyann kernel: ata5: device not ready (errno=-16), forcing
hardreset
Dec 9 12:49:36 tiyann kernel: ata5: soft resetting link
Dec 9 12:49:37 tiyann kernel: ata5: EH complete
--
Configure bugmail: http://bugzilla.kernel.org/userprefs.cgi?tab=email
------- You are receiving this mail because: -------
You are on the CC list for the bug, or are watching someone who is.
-------------------------------------------------------------------------
SF.Net email is sponsored by:
Check out the new SourceForge.net Marketplace.
It's the best place to buy or sell services for
just about anything Open Source.
http://sourceforge.net/services/buy/index.php
_______________________________________________
acpi-bugzilla mailing list
acpi-bugzilla@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/acpi-bugzilla
