http://bugzilla.kernel.org/show_bug.cgi?id=9151
[EMAIL PROTECTED] changed:
What |Removed |Added
----------------------------------------------------------------------------
CC| |[EMAIL PROTECTED]
------- Comment #9 from [EMAIL PROTECTED] 2007-12-15 08:44 -------
I see this problem sometimes too. (acpi-cpufreq driver does not speed down)
System: HP NC6000 Laptop, Pentium M 1.6GHz, Fedora7, Kernel 2.6.24-rc4.
When running on AC at full CPU speed, then plugging AC, CPU speed stays at 1600
MHz. Even when switching manually to powersafe governour, acpi-cpufreq does not
change back to 600 MHz. It seems it thinks it is already running on 600 MHz.
Only when I switch to ondemand and then back to powersafe governour the speed
finally goes down to 600 MHz.
--
Configure bugmail: http://bugzilla.kernel.org/userprefs.cgi?tab=email
------- You are receiving this mail because: -------
You are on the CC list for the bug, or are watching someone who is.
-------------------------------------------------------------------------
SF.Net email is sponsored by:
Check out the new SourceForge.net Marketplace.
It's the best place to buy or sell services
for just about anything Open Source.
http://ad.doubleclick.net/clk;164216239;13503038;w?http://sf.net/marketplace
_______________________________________________
acpi-bugzilla mailing list
acpi-bugzilla@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/acpi-bugzilla
