http://bugzilla.kernel.org/show_bug.cgi?id=9485
------- Comment #9 from [EMAIL PROTECTED] 2008-01-06 22:01 ------- >at the moment the fan is set to 60% speed (FanEQ). >It's still running at fullspeed (I think this is wrong.) No, ACPI fan device only supports two states in all, ON and OFF. So if you want to use ACPI to control the fan, you can not throttle the fan. Use ACPI and FanEQ to control the fan at the same time is a bad idea. :( So please do the same test with FanEQ disabled and CONFIG_HWMON cleared. :) After the system is boot, what do you see in the dmesg if you "echo 0 >/proc/acpi/fan/FAN/state"? Can you turn on the fan successfully? And what do you see if you turn off the fan, ie, "echo 3 >/proc/acpi/fan/FAN/state"? -- Configure bugmail: http://bugzilla.kernel.org/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug, or are watching someone who is. ------------------------------------------------------------------------- This SF.net email is sponsored by: Microsoft Defy all challenges. Microsoft(R) Visual Studio 2005. http://clk.atdmt.com/MRT/go/vse0120000070mrt/direct/01/ _______________________________________________ acpi-bugzilla mailing list acpi-bugzilla@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/acpi-bugzilla
