http://bugzilla.kernel.org/show_bug.cgi?id=5911
------- Comment #12 from [EMAIL PROTECTED] 2008-01-13 11:05 ------- Created an attachment (id=14437) --> (http://bugzilla.kernel.org/attachment.cgi?id=14437&action=view) copy of minicom bootlog panic.txt 2.6.24-r6-mm1 does not seem quite ready yet I patched 2.6.23->2.6.24-rc6->2.6.24-rc6-mm1 and copied .config from 2.6.23.9 make oldconfig it failed to compile with nfs on. turned nfs off. won't boot panics in __find_get_block/__getblk is there something else I should try? I have been running with the pata_sil on 2.6.23.9 looking over my notes I seem to remember that it appeared to be a problem with enabling the board interrupt before initializing the second channel and something BIOS? may have left a pending interrupt on the second channel since the board is enabled but the second channel is not configured yet the interrupt is not cleared and stays active. ~800000 later it dies due to the timeout. then the second channel is configured and has more trouble since the interrupt is disabled... -- Configure bugmail: http://bugzilla.kernel.org/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug, or are watching someone who is. ------------------------------------------------------------------------- Check out the new SourceForge.net Marketplace. It's the best place to buy or sell services for just about anything Open Source. http://ad.doubleclick.net/clk;164216239;13503038;w?http://sf.net/marketplace _______________________________________________ acpi-bugzilla mailing list acpi-bugzilla@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/acpi-bugzilla
