http://bugzilla.kernel.org/show_bug.cgi?id=10240
Summary: Failed to read /proc/acpi/battery/BAT0/info
Product: ACPI
Version: 2.5
KernelVersion: 2.6.24.3
Platform: All
OS/Version: Linux
Tree: Mainline
Status: NEW
Severity: normal
Priority: P1
Component: Power-Battery
AssignedTo: [EMAIL PROTECTED]
ReportedBy: [EMAIL PROTECTED]
Latest working kernel version: none
Earliest failing kernel version: none
Distribution: Ubuntu 7.10
Hardware Environment:
[ 0.000000] Linux version 2.6.24.3redchrom ([EMAIL PROTECTED]) (gcc
version 4.1.3 20070929 (prerelease) (Ubuntu 4.1.2-16ubuntu2)) #3 SMP Fri Mar 14
15:10:54 IRKT 2008
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f800 (usable)
[ 0.000000] BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000d0000 - 00000000000d4000 (reserved)
[ 0.000000] BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 0000000037e80000 (usable)
[ 0.000000] BIOS-e820: 0000000037e80000 - 0000000037e94000 (ACPI data)
[ 0.000000] BIOS-e820: 0000000037e94000 - 0000000037f00000 (ACPI NVS)
[ 0.000000] BIOS-e820: 0000000037f00000 - 0000000040000000 (reserved)
[ 0.000000] BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
[ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved)
[ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
[ 0.000000] BIOS-e820: 00000000fff00000 - 0000000100000000 (reserved)
[ 0.000000] 0MB HIGHMEM available.
[ 0.000000] 894MB LOWMEM available.
[ 0.000000] found SMP MP-table at 000f86e0
[ 0.000000] Entering add_active_range(0, 0, 228992) 0 entries of 256 used
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0 -> 4096
[ 0.000000] Normal 4096 -> 228992
[ 0.000000] HighMem 228992 -> 228992
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[1] active PFN ranges
[ 0.000000] 0: 0 -> 228992
[ 0.000000] On node 0 totalpages: 228992
[ 0.000000] DMA zone: 32 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 4064 pages, LIFO batch:0
[ 0.000000] Normal zone: 1757 pages used for memmap
[ 0.000000] Normal zone: 223139 pages, LIFO batch:31
[ 0.000000] HighMem zone: 0 pages used for memmap
[ 0.000000] Movable zone: 0 pages used for memmap
[ 0.000000] DMI present.
[ 0.000000] ACPI: RSDP 000F8630, 0024 (r2 PTLTD )
[ 0.000000] ACPI: XSDT 37E8D7AF, 0064 (r1 BenQ Joybook 6040000 LTP
0)
[ 0.000000] ACPI: FACP 37E93CB8, 00F4 (r3 VN896 PTLTW 6040000 PTL_
F4240)
[ 0.000000] ACPI: DSDT 37E8FB9D, 40A7 (r1 VIA PTL_ACPI 6040000 MSFT
3000001)
[ 0.000000] ACPI: FACS 37E94FC0, 0040
[ 0.000000] ACPI: APIC 37E93DAC, 006A (r1 PTLTD APIC 6040000 LTP
0)
[ 0.000000] ACPI: SLIC 37E93E16, 0176 (r1 BenQ Joybook 6040000 LTP
1)
[ 0.000000] ACPI: MCFG 37E93F8C, 003C (r1 PTLTD MCFG 6040000 LTP
0)
[ 0.000000] ACPI: HPET 37E93FC8, 0038 (r1 PTLTD HPETTBL 6040000 LTP
1)
[ 0.000000] ACPI: SSDT 37E8EC7B, 025F (r1 PmRef Cpu0Tst 3000 INTL
20050228)
[ 0.000000] ACPI: SSDT 37E8EBD5, 00A6 (r1 PmRef Cpu1Tst 3000 INTL
20050228)
[ 0.000000] ACPI: SSDT 37E8D813, 13C2 (r1 PmRef CpuPm 3000 INTL
20050228)
[ 0.000000] ACPI: DMI detected: BenQ
[ 0.000000] ACPI: PM-Timer IO Port: 0x4008
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[ 0.000000] Processor #0 6:14 APIC version 20
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
[ 0.000000] Processor #1 6:14 APIC version 20
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 2, version 3, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: IOAPIC (id[0x03] address[0xfecc0000] gsi_base[24])
[ 0.000000] IOAPIC[1]: apic_id 3, version 3, address 0xfecc0000, GSI 24-47
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] ACPI: IRQ10 used by override.
[ 0.000000] Enabling APIC mode: Flat. Using 2 I/O APICs
[ 0.000000] ACPI: HPET id: 0x11068201 base: 0xfed00000
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] Allocating PCI resources starting at 50000000 (gap:
40000000:a0000000)
[ 0.000000] swsusp: Registered nosave memory region: 000000000009f000 -
00000000000a0000
[ 0.000000] swsusp: Registered nosave memory region: 00000000000a0000 -
00000000000d0000
[ 0.000000] swsusp: Registered nosave memory region: 00000000000d0000 -
00000000000d4000
[ 0.000000] swsusp: Registered nosave memory region: 00000000000d4000 -
00000000000e0000
[ 0.000000] swsusp: Registered nosave memory region: 00000000000e0000 -
0000000000100000
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total
pages: 227203
[ 0.000000] Kernel command line:
root=UUID=050f4f31-e257-4da1-be05-f3917e996000 ro
[ 0.000000] mapped APIC to ffffb000 (fee00000)
[ 0.000000] mapped IOAPIC to ffffa000 (fec00000)
[ 0.000000] mapped IOAPIC to ffff9000 (fecc0000)
[ 0.000000] Enabling fast FPU save and restore... done.
[ 0.000000] Enabling unmasked SIMD FPU exception support... done.
[ 0.000000] Initializing CPU#0
[ 0.000000] PID hash table entries: 4096 (order: 12, 16384 bytes)
[ 0.000000] Detected 1995.058 MHz processor.
[ 24.641672] Console: colour VGA+ 80x25
[ 24.641678] console [tty0] enabled
[ 24.644825] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[ 24.645153] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 24.671086] Memory: 897668k/915968k available (2156k kernel code, 17740k
reserved, 774k data, 352k init, 0k highmem)
[ 24.671147] virtual kernel memory layout:
[ 24.671148] fixmap : 0xfff4c000 - 0xfffff000 ( 716 kB)
[ 24.671149] pkmap : 0xff800000 - 0xffc00000 (4096 kB)
[ 24.671150] vmalloc : 0xf8800000 - 0xff7fe000 ( 111 MB)
[ 24.671151] lowmem : 0xc0000000 - 0xf7e80000 ( 894 MB)
[ 24.671152] .init : 0xc03e4000 - 0xc043c000 ( 352 kB)
[ 24.671153] .data : 0xc031b2cb - 0xc03dce64 ( 774 kB)
[ 24.671154] .text : 0xc0100000 - 0xc031b2cb (2156 kB)
[ 24.671508] Checking if this processor honours the WP bit even in supervisor
mode... Ok.
[ 24.671832] hpet clockevent registered
[ 24.751792] Calibrating delay using timer specific routine.. 3992.63
BogoMIPS (lpj=7985260)
[ 24.751922] Security Framework initialized
[ 24.751987] Mount-cache hash table entries: 512
[ 24.752164] CPU: After generic identify, caps: bfe9fbff 00100000 00000000
00000000 0000c189 00000000 00000000 00000000
[ 24.752171] monitor/mwait feature present.
[ 24.752216] using mwait in idle threads.
[ 24.752262] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 24.752342] CPU: L2 cache: 2048K
[ 24.752387] CPU: Physical Processor ID: 0
[ 24.752432] CPU: Processor Core ID: 0
[ 24.752476] CPU: After all inits, caps: bfe9fbff 00100000 00000000 00002940
0000c189 00000000 00000000 00000000
[ 24.752483] Compat vDSO mapped to ffffe000.
[ 24.752538] Checking 'hlt' instruction... OK.
[ 24.768147] SMP alternatives: switching to UP code
[ 24.769869] ACPI: Core revision 20070126
[ 24.769967] ACPI: Table DSDT replaced by host OS
[ 24.770084] ACPI: DSDT 00000000, 3748 (r1 VIA PTL_ACPI 6040000 INTL
20061109)
[ 24.770208] ACPI: DSDT override uses original SSDTs unless
"acpi_no_auto_ssdt"CPU0: Intel(R) Core(TM) Duo CPU T2450 @ 2.00GHz
stepping 0c
[ 24.779625] SMP alternatives: switching to SMP code
[ 24.780463] Booting processor 1/1 eip 3000
[ 24.790657] Initializing CPU#1
[ 24.867724] Calibrating delay using timer specific routine.. 3990.05
BogoMIPS (lpj=7980118)
[ 24.867733] CPU: After generic identify, caps: bfe9fbff 00100000 00000000
00000000 0000c189 00000000 00000000 00000000
[ 24.867738] monitor/mwait feature present.
[ 24.867741] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 24.867743] CPU: L2 cache: 2048K
[ 24.867745] CPU: Physical Processor ID: 0
[ 24.867746] CPU: Processor Core ID: 1
[ 24.867748] CPU: After all inits, caps: bfe9fbff 00100000 00000000 00002940
0000c189 00000000 00000000 00000000
[ 24.868301] CPU1: Intel(R) Core(TM) Duo CPU T2450 @ 2.00GHz stepping
0c
[ 24.868726] Total of 2 processors activated (7982.68 BogoMIPS).
[ 24.869115] ENABLING IO-APIC IRQs
[ 24.869349] ..TIMER: vector=0x31 apic1=0 pin1=0 apic2=-1 pin2=-1
[ 25.015805] checking TSC synchronization [CPU#0 -> CPU#1]: passed.
[ 25.035894] Brought up 2 CPUs
[ 25.036176] net_namespace: 64 bytes
[ 25.036225] Booting paravirtualized kernel on bare hardware
[ 25.036669] Time: 15:55:02 Date: 03/14/08
[ 25.036749] NET: Registered protocol family 16
[ 25.036952] EISA bus registered
[ 25.036998] ACPI: bus type pci registered
[ 25.037120] PCI: Using MMCONFIG
[ 25.037756] Setting up standard PCI resources
[ 25.046285] ACPI: EC: Look up EC in DSDT
[ 25.049177] ACPI: Interpreter enabled
[ 25.049221] ACPI: (supports S0 S3 S4 S5)
[ 25.049407] ACPI: Using IOAPIC for interrupt routing
[ 25.050164] ACPI: EC: non-query interrupt received, switching to interrupt
mode
[ 25.054137] ACPI: EC: GPE = 0x5, I/O: command/status = 0x66, data = 0x62
[ 25.054183] ACPI: EC: driver started in interrupt mode
[ 25.054266] ACPI: PCI Root Bridge [PCI0] (0000:00)
[ 25.055802] PCI: Transparent bridge - 0000:00:13.1
[ 25.055873] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 25.056106] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEGC._PRT]
[ 25.056172] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PE0C._PRT]
[ 25.056247] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.SP2P._PRT]
[ 25.056332] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P2PE._PRT]
[ 25.067651] ACPI: PCI Interrupt Link [ALKA] (IRQs 16 17 18 19 20 21 22 23)
*9, disabled.
[ 25.068177] ACPI: PCI Interrupt Link [ALKB] (IRQs 16 17 18 19 20 21 22 23)
*10, disabled.
[ 25.068699] ACPI: PCI Interrupt Link [ALKC] (IRQs 22) *11, disabled.
[ 25.068975] ACPI: PCI Interrupt Link [ALKD] (IRQs 21) *3, disabled.
[ 25.069274] ACPI: PCI Interrupt Link [LNKA] (IRQs *9 10 11 12)
[ 25.069603] ACPI: PCI Interrupt Link [LNKB] (IRQs 9 *10 11 12)
[ 25.069931] ACPI: PCI Interrupt Link [LNKC] (IRQs 9 10 *11 12)
[ 25.070258] ACPI: PCI Interrupt Link [LNKD] (IRQs 9 10 11 12) *3
[ 25.070672] Linux Plug and Play Support v0.97 (c) Adam Belay
[ 25.070743] pnp: PnP ACPI init
[ 25.070790] ACPI: bus type pnp registered
[ 25.072613] pnp: PnP ACPI: found 11 devices
[ 25.072656] ACPI: ACPI bus type pnp unregistered
[ 25.072701] PnPBIOS: Disabled by ACPI PNP
[ 25.072928] PCI: Using ACPI for IRQ routing
[ 25.072973] PCI: If a device doesn't work, try "pci=routeirq". If it helps,
post a report
[ 25.087889] NET: Registered protocol family 8
[ 25.087932] NET: Registered protocol family 20
[ 25.088007] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[ 25.088187] hpet0: 3 32-bit timers, 14318180 Hz
[ 25.091605] Time: tsc clocksource has been installed.
[ 25.115624] system 00:01: iomem range 0xe0000000-0xefffffff could not be
reserved
[ 25.115675] system 00:01: iomem range 0xf0012000-0xf0012fff has been
reserved
[ 25.115720] system 00:01: iomem range 0xf0013000-0xf0013fff has been
reserved
[ 25.115771] system 00:06: iomem range 0x0-0x9ffff could not be reserved
[ 25.115816] system 00:06: iomem range 0xe0000-0xfffff could not be reserved
[ 25.115862] system 00:06: iomem range 0xfff00000-0xffffffff could not be
reserved
[ 25.115912] system 00:06: iomem range 0xffee0000-0xffefffff has been
reserved
[ 25.115958] system 00:06: iomem range 0xfec00000-0xfec0ffff could not be
reserved
[ 25.116009] system 00:06: iomem range 0xfee00000-0xfee0ffff could not be
reserved
[ 25.116062] system 00:07: ioport range 0x4d0-0x4d1 has been reserved
[ 25.116107] system 00:07: ioport range 0xfe10-0xfe11 has been reserved
[ 25.116152] system 00:07: ioport range 0xfe00-0xfe00 has been reserved
[ 25.116197] system 00:07: ioport range 0x4000-0x407f has been reserved
[ 25.116242] system 00:07: ioport range 0x4100-0x411f has been reserved
[ 25.116287] system 00:07: ioport range 0x378-0x378 has been reserved
[ 25.116332] system 00:07: ioport range 0x37c-0x37c has been reserved
[ 25.116377] system 00:07: iomem range 0xffb00000-0xffedefff has been
reserved
[ 25.146771] PCI: Failed to allocate mem resource #6:[EMAIL PROTECTED] for
0000:01:00.0
[ 25.146821] PCI: Bridge: 0000:00:01.0
[ 25.147650] IO window: disabled.
[ 25.147695] MEM window: c9000000-c9ffffff
[ 25.147739] PREFETCH window: a0000000-bfffffff
[ 25.147784] PCI: Bridge: 0000:00:02.0
[ 25.147827] IO window: 5000-6fff
[ 25.147872] MEM window: ca000000-ca8fffff
[ 25.147916] PREFETCH window: c8000000-c87fffff
[ 25.147961] PCI: Bridge: 0000:00:03.0
[ 25.148004] IO window: 7000-8fff
[ 25.148048] MEM window: cb000000-cb7fffff
[ 25.148093] PREFETCH window: c8800000-c8ffffff
[ 25.148139] PCI: Bridge: 0000:00:13.0
[ 25.148180] IO window: disabled.
[ 25.148225] MEM window: ca900000-ca9fffff
[ 25.148268] PREFETCH window: disabled.
[ 25.148313] PCI: Bridge: 0000:00:13.1
[ 25.148355] IO window: disabled.
[ 25.148398] MEM window: disabled.
[ 25.148442] PREFETCH window: disabled.
[ 25.148499] PCI: Setting latency timer of device 0000:00:01.0 to 64
[ 25.148512] ACPI: PCI Interrupt 0000:00:02.0[A] -> GSI 27 (level, low) ->
IRQ 16
[ 25.148598] PCI: Setting latency timer of device 0000:00:02.0 to 64
[ 25.148611] ACPI: PCI Interrupt 0000:00:03.0[A] -> GSI 31 (level, low) ->
IRQ 17
[ 25.148697] PCI: Setting latency timer of device 0000:00:03.0 to 64
[ 25.148707] PCI: Setting latency timer of device 0000:00:13.0 to 64
[ 25.148717] PCI: Setting latency timer of device 0000:00:13.1 to 64
[ 25.148747] NET: Registered protocol family 2
[ 25.191614] IP route cache hash table entries: 32768 (order: 5, 131072
bytes)
[ 25.191883] TCP established hash table entries: 131072 (order: 8, 1048576
bytes)
[ 25.193212] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[ 25.194086] TCP: Hash tables configured (established 131072 bind 65536)
[ 25.194131] TCP reno registered
[ 25.203745] checking if image is initramfs... it is
[ 25.705871] Freeing initrd memory: 5991k freed
[ 25.707021] audit: initializing netlink socket (disabled)
[ 25.707092] audit(1205510101.908:1): initialized
[ 25.707476] VFS: Disk quotas dquot_6.5.1
[ 25.707551] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 25.707733] io scheduler noop registered
[ 25.707776] io scheduler anticipatory registered
[ 25.707819] io scheduler deadline registered
[ 25.707874] io scheduler cfq registered (default)
[ 25.707936] PCI: VIA PCI bridge detected. Disabling DAC.
[ 25.708056] Boot video device is 0000:01:00.0
[ 25.708213] PCI: Setting latency timer of device 0000:00:02.0 to 64
[ 25.708249] assign_interrupt_mode Found MSI capability
[ 25.708335] Allocate Port Service[0000:00:02.0:pcie00]
[ 25.708367] Allocate Port Service[0000:00:02.0:pcie01]
[ 25.708406] Allocate Port Service[0000:00:02.0:pcie02]
[ 25.708442] Allocate Port Service[0000:00:02.0:pcie03]
[ 25.708516] PCI: Setting latency timer of device 0000:00:03.0 to 64
[ 25.708559] assign_interrupt_mode Found MSI capability
[ 25.708643] Allocate Port Service[0000:00:03.0:pcie00]
[ 25.708676] Allocate Port Service[0000:00:03.0:pcie01]
[ 25.708709] Allocate Port Service[0000:00:03.0:pcie02]
[ 25.708740] Allocate Port Service[0000:00:03.0:pcie03]
[ 25.709194] AER service couldn't init device 0000:00:02.0:pcie01 - no _OSC
support
[ 25.709512] AER service couldn't init device 0000:00:03.0:pcie01 - no _OSC
support
[ 25.709583] isapnp: Scanning for PnP cards...
[ 26.063649] isapnp: No Plug & Play device found
[ 26.084517] Real Time Clock Driver v1.12ac
[ 26.084827] hpet_resources: 0xfed00000 is busy
[ 26.084873] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing
enabled
[ 26.086100] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024
blocksize
[ 26.086150] HP CISS Driver (v 3.6.14)
[ 26.086233] Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
[ 26.086279] ide: Assuming 33MHz system bus speed for PIO modes; override
with idebus=xx
[ 26.086600] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64
irq 1,12
[ 26.088579] i8042.c: Detected active multiplexing controller, rev 1.1.
[ 26.089751] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 26.089798] serio: i8042 AUX0 port at 0x60,0x64 irq 12
[ 26.089853] serio: i8042 AUX1 port at 0x60,0x64 irq 12
[ 26.089901] serio: i8042 AUX2 port at 0x60,0x64 irq 12
[ 26.089948] serio: i8042 AUX3 port at 0x60,0x64 irq 12
[ 26.090099] mice: PS/2 mouse device common for all mice
[ 26.090253] EISA: Probing bus 0 at eisa.0
[ 26.090314] Cannot allocate resource for EISA slot 4
[ 26.090358] Cannot allocate resource for EISA slot 5
[ 26.090401] Cannot allocate resource for EISA slot 6
[ 26.090445] Cannot allocate resource for EISA slot 7
[ 26.090488] Cannot allocate resource for EISA slot 8
[ 26.090531] EISA: Detected 0 cards.
[ 26.090685] TCP cubic registered
[ 26.090740] NET: Registered protocol family 1
[ 26.090819] Starting balanced_irq
[ 26.090883] Using IPI No-Shortcut mode
[ 26.091070] Magic number: 0:514:942
[ 26.091193] hash matches device ptyyd
[ 26.091623] Freeing unused kernel memory: 352k freed
[ 26.122337] input: AT Translated Set 2 keyboard as /class/input/input0
[ 26.251206] fuse init (API version 7.9)
[ 26.258933] ACPI: SSDT 37E8F423, 02BE (r1 PmRef Cpu0Ist 3000 INTL
20050228)
[ 26.259305] ACPI: SSDT 37E8EEDA, 04C4 (r1 PmRef Cpu0Cst 3001 INTL
20050228)
[ 26.261662] ACPI: Processor [CPU0] (supports 8 throttling states)
[ 26.262110] ACPI: SSDT 37E8F6E1, 00C3 (r1 PmRef Cpu1Ist 3000 INTL
20050228)
[ 26.262434] ACPI: SSDT 37E8F39E, 0085 (r1 PmRef Cpu1Cst 3000 INTL
20050228)
[ 26.263403] ACPI: Processor [CPU1] (supports 8 throttling states)
[ 26.263564] ACPI Exception (processor_core-0816): AE_NOT_FOUND, Processor
Device is not present [20070126]
[ 26.263692] ACPI Exception (processor_core-0816): AE_NOT_FOUND, Processor
Device is not present [20070126]
[ 26.263819] ACPI Exception (processor_core-0816): AE_NOT_FOUND, Processor
Device is not present [20070126]
[ 26.263946] ACPI Exception (processor_core-0816): AE_NOT_FOUND, Processor
Device is not present [20070126]
[ 26.264074] ACPI Exception (processor_core-0816): AE_NOT_FOUND, Processor
Device is not present [20070126]
[ 26.264200] ACPI Exception (processor_core-0816): AE_NOT_FOUND, Processor
Device is not present [20070126]
[ 26.273273] ACPI: Thermal Zone [TZ0] (55 C)
[ 26.678995] usbcore: registered new interface driver usbfs
[ 26.679101] usbcore: registered new interface driver hub
[ 26.685863] VP_IDE: IDE controller (0x1106:0x0571 rev 0x07) at PCI slot
0000:00:0f.1
[ 26.686027] VP_IDE: not 100% native mode: will probe irqs later
[ 26.686078] VP_IDE: VIA vt8237a (rev 00) IDE UDMA133 controller on
pci0000:00:0f.1
[ 26.686135] ide0: BM-DMA at 0x4c90-0x4c97, BIOS settings: hda:pio,
hdb:pio
[ 26.686262] ide1: BM-DMA at 0x4c98-0x4c9f, BIOS settings: hdc:DMA,
hdd:pio
[ 26.686384] Probing IDE interface ide0...
[ 26.695482] usbcore: registered new device driver usb
[ 26.706587] USB Universal Host Controller Interface driver v3.0
[ 26.791537] via-rhine.c:v1.10-LK1.4.3 2007-03-06 Written by Donald Becker
[ 27.254358] Probing IDE interface ide1...
[ 28.453750] hdc: HL-DT-ST DVDRAM GSA-T20N, ATAPI CD/DVD-ROM drive
[ 28.453949] hdc: host max PIO5 wanted PIO255(auto-tune) selected PIO4
[ 28.454814] hdc: UDMA/33 mode selected
[ 28.455305] ide1 at 0x170-0x177,0x376 on irq 15
[ 28.465031] ACPI: PCI Interrupt 0000:00:10.4[C] -> GSI 21 (level, low) ->
IRQ 18
[ 28.465177] ehci_hcd 0000:00:10.4: EHCI Host Controller
[ 28.465673] ehci_hcd 0000:00:10.4: new USB bus registered, assigned bus
number 1
[ 28.465763] ehci_hcd 0000:00:10.4: irq 18, io mem 0xcac00000
[ 28.471454] SCSI subsystem initialized
[ 28.477641] ehci_hcd 0000:00:10.4: USB 2.0 started, EHCI 1.00, driver 10 Dec
2004
[ 28.477845] usb usb1: configuration #1 chosen from 1 choice
[ 28.477914] hub 1-0:1.0: USB hub found
[ 28.477963] hub 1-0:1.0: 8 ports detected
[ 28.478613] libata version 3.00 loaded.
[ 28.581807] ACPI: PCI Interrupt 0000:00:10.0[A] -> GSI 20 (level, low) ->
IRQ 19
[ 28.581923] uhci_hcd 0000:00:10.0: UHCI Host Controller
[ 28.581993] uhci_hcd 0000:00:10.0: new USB bus registered, assigned bus
number 2
[ 28.582077] uhci_hcd 0000:00:10.0: irq 19, io base 0x00004c00
[ 28.582233] usb usb2: configuration #1 chosen from 1 choice
[ 28.582303] hub 2-0:1.0: USB hub found
[ 28.582356] hub 2-0:1.0: 2 ports detected
[ 28.685667] ACPI: PCI Interrupt 0000:00:10.1[B] -> GSI 22 (level, low) ->
IRQ 20
[ 28.685766] uhci_hcd 0000:00:10.1: UHCI Host Controller
[ 28.685834] uhci_hcd 0000:00:10.1: new USB bus registered, assigned bus
number 3
[ 28.685907] uhci_hcd 0000:00:10.1: irq 20, io base 0x00004c20
[ 28.686066] usb usb3: configuration #1 chosen from 1 choice
[ 28.686131] hub 3-0:1.0: USB hub found
[ 28.686179] hub 3-0:1.0: 2 ports detected
[ 28.789534] ACPI: PCI Interrupt 0000:00:10.2[C] -> GSI 21 (level, low) ->
IRQ 18
[ 28.789624] uhci_hcd 0000:00:10.2: UHCI Host Controller
[ 28.789688] uhci_hcd 0000:00:10.2: new USB bus registered, assigned bus
number 4
[ 28.789755] uhci_hcd 0000:00:10.2: irq 18, io base 0x00004c40
[ 28.789895] usb usb4: configuration #1 chosen from 1 choice
[ 28.789959] hub 4-0:1.0: USB hub found
[ 28.790006] hub 4-0:1.0: 2 ports detected
[ 28.893469] ACPI: PCI Interrupt 0000:00:10.3[D] -> GSI 23 (level, low) ->
IRQ 21
[ 28.893559] uhci_hcd 0000:00:10.3: UHCI Host Controller
[ 28.893632] uhci_hcd 0000:00:10.3: new USB bus registered, assigned bus
number 5
[ 28.893702] uhci_hcd 0000:00:10.3: irq 21, io base 0x00004c60
[ 28.893843] usb usb5: configuration #1 chosen from 1 choice
[ 28.893907] hub 5-0:1.0: USB hub found
[ 28.893954] hub 5-0:1.0: 2 ports detected
[ 28.997513] ACPI: PCI Interrupt 0000:00:12.0[A] -> GSI 23 (level, low) ->
IRQ 21
[ 29.001730] eth0: VIA Rhine II at 0x14800, 00:40:d0:c2:4c:8a, IRQ 21.
[ 29.002485] eth0: MII PHY found at address 1, status 0x7849 advertising 05e1
Link 0000.
[ 29.006321] usb 2-1: new low speed USB device using uhci_hcd and address 2
[ 29.007071] sata_via 0000:00:0f.0: version 2.3
[ 29.007098] ACPI: PCI Interrupt 0000:00:0f.0[B] -> GSI 21 (level, low) ->
IRQ 18
[ 29.007248] sata_via 0000:00:0f.0: routed to hard irq line 10
[ 29.007755] scsi0 : sata_via
[ 29.008256] scsi1 : sata_via
[ 29.008340] ata1: SATA max UDMA/133 cmd 0x4cb0 ctl 0x4ca4 bmdma 0x4c80 irq
18
[ 29.008388] ata2: SATA max UDMA/133 cmd 0x4ca8 ctl 0x4ca0 bmdma 0x4c88 irq
18
[ 29.015535] hdc: ATAPI 24X DVD-ROM DVD-R-RAM CD-R/RW drive, 2048kB Cache
[ 29.015799] Uniform CD-ROM driver Revision: 3.20
[ 29.178973] usb 2-1: configuration #1 chosen from 1 choice
[ 29.209462] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 29.321421] usbcore: registered new interface driver hiddev
[ 29.373735] ata1.00: ATA-8: FUJITSU MHW2120BH, 00000012, max UDMA/100
[ 29.373782] ata1.00: 234441648 sectors, multi 16: LBA48 NCQ (depth 0/32)
[ 29.389715] ata1.00: configured for UDMA/100
[ 29.592989] ata2: SATA link down 1.5 Gbps (SStatus 0 SControl 300)
[ 29.603915] scsi 0:0:0:0: Direct-Access ATA FUJITSU MHW2120B 0000
PQ: 0 ANSI: 5
[ 29.608939] Driver 'sd' needs updating - please use bus_type methods
[ 29.609075] sd 0:0:0:0: [sda] 234441648 512-byte hardware sectors (120034
MB)
[ 29.609136] sd 0:0:0:0: [sda] Write Protect is off
[ 29.609186] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 29.609200] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled,
doesn't support DPO or FUA
[ 29.609319] sd 0:0:0:0: [sda] 234441648 512-byte hardware sectors (120034
MB)
[ 29.609374] sd 0:0:0:0: [sda] Write Protect is off
[ 29.609419] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 29.609436] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled,
doesn't support DPO or FUA
[ 29.609490] sda: sda1 < sda5 sda6 > sda3
[ 29.610479] sd 0:0:0:0: [sda] Attached SCSI disk
[ 29.613870] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 29.882330] Attempting manual resume
[ 29.882376] swsusp: Resume From Partition 8:5
[ 29.882377] PM: Checking swsusp image.
[ 29.882646] PM: Resume from disk failed.
[ 29.894906] kjournald starting. Commit interval 5 seconds
[ 29.894918] EXT3-fs: mounted filesystem with ordered data mode.
[ 30.105630] input: KYE NetScroll Eye as /class/input/input1
[ 30.116698] input: USB HID v1.10 Mouse [KYE NetScroll Eye] on
usb-0000:00:10.0-1
[ 30.116829] usbcore: registered new interface driver usbhid
[ 30.116876] drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver
[ 36.541789] input: Power Button (FF) as /class/input/input2
[ 36.596995] ACPI: Power Button (FF) [PWRF]
[ 36.609089] ACPI: AC Adapter [AC] (on-line)
[ 36.609259] input: Sleep Button (CM) as /class/input/input3
[ 36.661053] ACPI: Sleep Button (CM) [SBTN]
[ 36.661195] input: Lid Switch as /class/input/input4
[ 36.693184] ACPI: Lid Switch [LID]
[ 36.695497] ACPI: Battery Slot [BAT0] (battery present)
[ 36.848996] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 36.893213] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 37.256904] input: PC Speaker as /class/input/input5
[ 37.554961] ACPI: PCI Interrupt 0000:06:01.0[A] -> GSI 17 (level, low) ->
IRQ 22
[ 37.555086] PCI: Setting latency timer of device 0000:06:01.0 to 64
[ 37.823885] Synaptics Touchpad, model: 1, fw: 6.2, id: 0x92a0b1, caps:
0xa04713/0x200000
[ 37.856873] input: SynPS/2 Synaptics TouchPad as /class/input/input6
[ 38.577310] lp: driver loaded but no devices found
[ 38.642087] Adding 995956k swap on /dev/sda5. Priority:-1 extents:1
across:995956k
[ 39.308175] EXT3 FS on sda6, internal journal
[ 45.022160] toshiba_acpi: Unknown parameter `hotkeys_over_acpi'
[ 46.491777] eth0: link down
[ 46.616000] NET: Registered protocol family 10
[ 46.616303] lo: Disabled Privacy Extensions
[ 46.616615] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 46.877482] ppdev: user-space parallel port driver
[ 67.743859] Bluetooth: Core ver 2.11
[ 67.744683] NET: Registered protocol family 31
[ 67.744689] Bluetooth: HCI device and connection manager initialized
[ 67.744697] Bluetooth: HCI socket layer initialized
[ 67.780613] Bluetooth: L2CAP ver 2.9
[ 67.780622] Bluetooth: L2CAP socket layer initialized
[ 67.896156] Bluetooth: RFCOMM socket layer initialized
[ 67.899324] Bluetooth: RFCOMM TTY layer initialized
[ 67.899337] Bluetooth: RFCOMM ver 1.8
[ 114.955770] hda-intel: Invalid position buffer, using LPIB read method
instead.
[ 206.113666] ath_hal: disagrees about version of symbol struct_module
[ 206.121369] wlan: disagrees about version of symbol struct_module
[ 206.125397] ath_pci: disagrees about version of symbol struct_module
[ 349.875924] ath_hal: module license 'Proprietary' taints kernel.
[ 349.881113] ath_hal: 0.9.18.0 (AR5210, AR5211, AR5212, RF5111, RF5112,
RF2413, RF5413)
[ 349.900347] wlan: 0.9.4
[ 349.908905] ath_pci: 0.9.4
[ 349.909425] ACPI: PCI Interrupt 0000:02:00.0[A] -> GSI 24 (level, low) ->
IRQ 23
[ 349.909444] PCI: Setting latency timer of device 0000:02:00.0 to 64
[ 350.422609] ath_rate_sample: 1.2 (0.9.4)
[ 350.423382] wifi0: 11b rates: 1Mbps 2Mbps 5.5Mbps 11Mbps
[ 350.423390] wifi0: 11g rates: 1Mbps 2Mbps 5.5Mbps 11Mbps 6Mbps 9Mbps 12Mbps
18Mbps 24Mbps 36Mbps 48Mbps 54Mbps
[ 350.423402] wifi0: H/W encryption support: WEP AES AES_CCM TKIP
[ 350.423408] wifi0: mac 10.0 phy 6.1 radio 10.2
[ 350.423413] wifi0: Use hw queue 1 for WME_AC_BE traffic
[ 350.423416] wifi0: Use hw queue 0 for WME_AC_BK traffic
[ 350.423418] wifi0: Use hw queue 2 for WME_AC_VI traffic
[ 350.423421] wifi0: Use hw queue 3 for WME_AC_VO traffic
[ 350.423423] wifi0: Use hw queue 8 for CAB traffic
[ 350.423425] wifi0: Use hw queue 9 for beacons
[ 350.437115] wifi0: Atheros 5424/2424: mem=0xca800000, irq=23
[ 361.849715] ADDRCONF(NETDEV_CHANGE): ath0: link becomes ready
[ 361.874584] NET: Registered protocol family 17
[ 380.510616] ath0: no IPv6 routers present
[ 2549.943181] ACPI: Battery Slot [BAT0] (battery present)
Software Environment:
Ubuntu 7.10
Problem Description:
I cannot read any file in /proc/acpi/battery/BAT0/ on my Benq R42 laptop.
Steps to reproduce:
% cat /proc/acpi/battery/BAT0/info
cat: /proc/acpi/battery/BAT0/info: Bad address
--
Configure bugmail: http://bugzilla.kernel.org/userprefs.cgi?tab=email
------- You are receiving this mail because: -------
You are the assignee for the bug, or are watching the assignee.
-------------------------------------------------------------------------
This SF.net email is sponsored by: Microsoft
Defy all challenges. Microsoft(R) Visual Studio 2008.
http://clk.atdmt.com/MRT/go/vse0120000070mrt/direct/01/
_______________________________________________
acpi-bugzilla mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/acpi-bugzilla
