http://bugzilla.kernel.org/show_bug.cgi?id=10932





------- Comment #14 from [EMAIL PROTECTED]  2008-09-18 12:15 -------
Created an attachment (id=17866)
 --> (http://bugzilla.kernel.org/attachment.cgi?id=17866&action=view)
Output of lspci -vxxx

I can not boot the system with neither 2.6.27-rc5 nor 2.6.27-rc6. I get 
a message that the root filesystem could not be mounted read/write.

FnF3 fires a GPE09 before suspending, so does the LID and unplugging the AC 
adapter.

I just recognized, that, using 2.6.26-rc9, ACPI dies also when the AC adapter 
is removed, even without going to S3.

The output of lspci -vxxx is the same before (ACPI working) and after S3 (ACPI 
dead).

>     Do you mean that there is no ACPI event when unplugging AC adapter or
> pressing LID state after the system is resumed from S3? Right?
>     thanks.

Yes, there are no events at all after resuming from S3. Depending on the kernel 
version, ACPI sometimes survives a sleep-resume cycle or detaching the AC 
adapter.
Even when ACPI is dead, /sys/firmware/acpi/interrupts/gpe09 increases every few 
seconds by a value between about ten and some hundreds.


-- 
Configure bugmail: http://bugzilla.kernel.org/userprefs.cgi?tab=email
------- You are receiving this mail because: -------
You are on the CC list for the bug, or are watching someone who is.

-------------------------------------------------------------------------
This SF.Net email is sponsored by the Moblin Your Move Developer's challenge
Build the coolest Linux based applications with Moblin SDK & win great prizes
Grand prize is a trip for two to an Open Source event anywhere in the world
http://moblin-contest.org/redirect.php?banner_id=100&url=/
_______________________________________________
acpi-bugzilla mailing list
acpi-bugzilla@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/acpi-bugzilla

Reply via email to