http://bugzilla.kernel.org/show_bug.cgi?id=12116
[EMAIL PROTECTED] changed:
What |Removed |Added
----------------------------------------------------------------------------
CC| |[EMAIL PROTECTED]
------- Comment #2 from [EMAIL PROTECTED] 2008-11-28 14:35 -------
[EMAIL PROTECTED]:~$ acpidump
acpi_os_map_memory: cannot open /dev/mem
-------START DMESG CAT----------
>[ 0.004000] Initializing cgroup subsys cpuacct
[ 0.004000] Initializing cgroup subsys memory
[ 0.004000] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 0.004000] CPU: L2 cache: 2048K
[ 0.004000] CPU: Physical Processor ID: 0
[ 0.004000] CPU: Processor Core ID: 0
[ 0.004000] using mwait in idle threads.
[ 0.004000] Checking 'hlt' instruction... OK.
[ 0.017819] ACPI: Core revision 20080926
[ 0.044452] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.085691] CPU0: Intel(R) Core(TM)2 Duo CPU T5850 @ 2.16GHz stepping
0d
[ 0.088001] Booting processor 1 APIC 0x1 ip 0x6000
[ 0.004000] Initializing CPU#1
[ 0.004000] Calibrating delay using timer specific routine.. 4333.31
BogoMIPS (lpj=8666634)
[ 0.004000] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 0.004000] CPU: L2 cache: 2048K
[ 0.004000] CPU: Physical Processor ID: 0
[ 0.004000] CPU: Processor Core ID: 1
[ 0.172472] CPU1: Intel(R) Core(TM)2 Duo CPU T5850 @ 2.16GHz stepping
0d
[ 0.172488] checking TSC synchronization [CPU#0 -> CPU#1]: passed.
[ 0.176025] Brought up 2 CPUs
[ 0.176028] Total of 2 processors activated (8666.63 BogoMIPS).
[ 0.176102] CPU0 attaching sched-domain:
[ 0.176105] domain 0: span 0-1 level MC
[ 0.176107] groups: 0 1
[ 0.176113] CPU1 attaching sched-domain:
[ 0.176115] domain 0: span 0-1 level MC
[ 0.176117] groups: 1 0
[ 0.176187] net_namespace: 776 bytes
[ 0.176187] Booting paravirtualized kernel on bare hardware
[ 0.176212] Time: 18:12:32 Date: 11/28/08
[ 0.176212] NET: Registered protocol family 16
[ 0.176212] EISA bus registered
[ 0.176212] ACPI: bus type pci registered
[ 0.176212] PCI: MCFG configuration 0: base f0000000 segment 0 buses 0 - 31
[ 0.176212] PCI: Not using MMCONFIG.
[ 0.176234] PCI: PCI BIOS revision 3.00 entry at 0xf0031, last bus=8
[ 0.176236] PCI: Using configuration type 1 for base access
[ 0.181160] ACPI: EC: EC description table is found, configuring boot EC
[ 0.199682] ACPI: Interpreter enabled
[ 0.199687] ACPI: (supports S0 S3 S4 S5)
[ 0.199707] ACPI: Using IOAPIC for interrupt routing
[ 0.199796] PCI: MCFG configuration 0: base f0000000 segment 0 buses 0 - 31
[ 0.211099] PCI: MCFG area at f0000000 reserved in ACPI motherboard
resources
[ 0.211101] PCI: Using MMCONFIG for extended config space
[ 0.232292] ACPI: EC: GPE = 0x0, I/O: command/status = 0x0, data = 0x0
[ 0.232292] ACPI: EC: driver started in poll mode
[ 0.232292] ACPI: No dock devices found.
[ 0.232383] ACPI: PCI Root Bridge [PCI0] (0000:00)
[ 0.232407] pci 0000:00:03.0: reg 10 io port: [0x4f00-0x4fff]
[ 0.232407] pci 0000:00:03.2: reg 10 io port: [0x4900-0x493f]
[ 0.232407] pci 0000:00:03.2: reg 20 io port: [0x4d00-0x4d3f]
[ 0.232407] pci 0000:00:03.2: reg 24 io port: [0x4e00-0x4e3f]
[ 0.232407] pci 0000:00:03.2: PME# supported from D3hot D3cold
[ 0.232407] pci 0000:00:03.2: PME# disabled
[ 0.232539] pci 0000:00:03.5: reg 10 32bit mmio: [0xfce80000-0xfcefffff]
[ 0.236051] pci 0000:00:04.0: reg 10 32bit mmio: [0xfce7f000-0xfce7ffff]
[ 0.236080] pci 0000:00:04.0: supports D1 D2
[ 0.236081] pci 0000:00:04.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.236085] pci 0000:00:04.0: PME# disabled
[ 0.236118] pci 0000:00:04.1: reg 10 32bit mmio: [0xfce7ec00-0xfce7ecff]
[ 0.236149] pci 0000:00:04.1: supports D1 D2
[ 0.236150] pci 0000:00:04.1: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.236154] pci 0000:00:04.1: PME# disabled
[ 0.236193] pci 0000:00:08.0: reg 10 32bit mmio: [0xfce78000-0xfce7bfff]
[ 0.236222] pci 0000:00:08.0: PME# supported from D3hot D3cold
[ 0.236225] pci 0000:00:08.0: PME# disabled
[ 0.236288] pci 0000:00:0a.0: reg 10 32bit mmio: [0xfce7d000-0xfce7dfff]
[ 0.236293] pci 0000:00:0a.0: reg 14 io port: [0xc080-0xc087]
[ 0.236298] pci 0000:00:0a.0: reg 18 32bit mmio: [0xfce7e800-0xfce7e8ff]
[ 0.236303] pci 0000:00:0a.0: reg 1c 32bit mmio: [0xfce7e400-0xfce7e40f]
[ 0.236320] pci 0000:00:0a.0: supports D1 D2
[ 0.236322] pci 0000:00:0a.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.236327] pci 0000:00:0a.0: PME# disabled
[ 0.236360] pci 0000:00:0b.0: reg 10 io port: [0xc000-0xc007]
[ 0.236365] pci 0000:00:0b.0: reg 14 io port: [0xbc00-0xbc03]
[ 0.236369] pci 0000:00:0b.0: reg 18 io port: [0xb880-0xb887]
[ 0.236374] pci 0000:00:0b.0: reg 1c io port: [0xb800-0xb803]
[ 0.236379] pci 0000:00:0b.0: reg 20 io port: [0xb480-0xb48f]
[ 0.236384] pci 0000:00:0b.0: reg 24 32bit mmio: [0xfce72000-0xfce73fff]
[ 0.236440] pci 0000:00:10.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.236443] pci 0000:00:10.0: PME# disabled
[ 0.236594] pci 0000:00:15.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.236602] pci 0000:00:15.0: PME# disabled
[ 0.236772] pci 0000:00:16.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.236780] pci 0000:00:16.0: PME# disabled
[ 0.236950] pci 0000:00:17.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.236958] pci 0000:00:17.0: PME# disabled
[ 0.237128] pci 0000:00:18.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.237136] pci 0000:00:18.0: PME# disabled
[ 0.237222] pci 0000:00:09.0: transparent bridge
[ 0.237265] pci 0000:02:00.0: reg 10 32bit mmio: [0xfd000000-0xfdffffff]
[ 0.237275] pci 0000:02:00.0: reg 14 64bit mmio: [0xe0000000-0xefffffff]
[ 0.237285] pci 0000:02:00.0: reg 1c 64bit mmio: [0xde000000-0xdfffffff]
[ 0.237292] pci 0000:02:00.0: reg 24 io port: [0xdc00-0xdc7f]
[ 0.237298] pci 0000:02:00.0: reg 30 32bit mmio: [0xfcfe0000-0xfcffffff]
[ 0.237347] pci 0000:00:10.0: bridge io port: [0xd000-0xdfff]
[ 0.237351] pci 0000:00:10.0: bridge 32bit mmio: [0xfcf00000-0xfdffffff]
[ 0.237356] pci 0000:00:10.0: bridge 64bit mmio pref:
[0xde000000-0xefffffff]
[ 0.237421] pci 0000:00:15.0: bridge io port: [0xe000-0xefff]
[ 0.237429] pci 0000:00:15.0: bridge 32bit mmio: [0xfe000000-0xfeafffff]
[ 0.237443] pci 0000:00:15.0: bridge 64bit mmio pref:
[0xfa000000-0xfbffffff]
[ 0.237500] pci 0000:06:00.0: reg 10 64bit mmio: [0xfebf0000-0xfebfffff]
[ 0.237538] pci 0000:06:00.0: supports D1
[ 0.237540] pci 0000:06:00.0: PME# supported from D0 D1 D3hot
[ 0.237544] pci 0000:06:00.0: PME# disabled
[ 0.237620] pci 0000:00:16.0: bridge 32bit mmio: [0xfeb00000-0xfebfffff]
[ 0.237863] bus 00 -> node 0
[ 0.237872] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.238216] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT]
[ 0.238483] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.IXVE._PRT]
[ 0.238710] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P6._PRT]
[ 0.238902] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P7._PRT]
[ 0.239097] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P8._PRT]
[ 0.239289] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P9._PRT]
[ 0.252784] ACPI: PCI Interrupt Link [LNKA] (IRQs 16 17 18 19) *0, disabled.
[ 0.252784] ACPI: PCI Interrupt Link [LNKB] (IRQs 16 17 18 19) *0, disabled.
[ 0.256084] ACPI: PCI Interrupt Link [LNKC] (IRQs 16 17 18 19) *0, disabled.
[ 0.256492] ACPI: PCI Interrupt Link [LNKD] (IRQs 16 17 18 19) *0, disabled.
[ 0.256901] ACPI: PCI Interrupt Link [LN0A] (IRQs 16 17 18 19) *0, disabled.
[ 0.257309] ACPI: PCI Interrupt Link [LN0B] (IRQs 16 17 18 19) *0, disabled.
[ 0.257714] ACPI: PCI Interrupt Link [LN0C] (IRQs 16 17 18 19) *0, disabled.
[ 0.258121] ACPI: PCI Interrupt Link [LN0D] (IRQs 16 17 18 19) *0, disabled.
[ 0.258529] ACPI: PCI Interrupt Link [LN1A] (IRQs 16 17 18 19) *0, disabled.
[ 0.258935] ACPI: PCI Interrupt Link [LN1B] (IRQs 16 17 18 19) *0, disabled.
[ 0.259340] ACPI: PCI Interrupt Link [LN1C] (IRQs 16 17 18 19) *0, disabled.
[ 0.259749] ACPI: PCI Interrupt Link [LN1D] (IRQs 16 17 18 19) *0, disabled.
[ 0.260164] ACPI: PCI Interrupt Link [LN2A] (IRQs 16 17 18 19) *0, disabled.
[ 0.260570] ACPI: PCI Interrupt Link [LN2B] (IRQs 16 17 18 19) *0, disabled.
[ 0.260973] ACPI: PCI Interrupt Link [LN2C] (IRQs 16 17 18 19) *0, disabled.
[ 0.261377] ACPI: PCI Interrupt Link [LN2D] (IRQs 16 17 18 19) *0, disabled.
[ 0.261782] ACPI: PCI Interrupt Link [LN3A] (IRQs 16 17 18 19) *0, disabled.
[ 0.262188] ACPI: PCI Interrupt Link [LN3B] (IRQs 16 17 18 19) *0, disabled.
[ 0.262593] ACPI: PCI Interrupt Link [LN3C] (IRQs 16 17 18 19) *0, disabled.
[ 0.263002] ACPI: PCI Interrupt Link [LN3D] (IRQs 16 17 18 19) *0, disabled.
[ 0.263414] ACPI: PCI Interrupt Link [LN4A] (IRQs 16 17 18 19) *10
[ 0.263821] ACPI: PCI Interrupt Link [LN4B] (IRQs 16 17 18 19) *0, disabled.
[ 0.264235] ACPI: PCI Interrupt Link [LN4C] (IRQs 16 17 18 19) *0, disabled.
[ 0.264642] ACPI: PCI Interrupt Link [LN4D] (IRQs 16 17 18 19) *0, disabled.
[ 0.265052] ACPI: PCI Interrupt Link [LN5A] (IRQs 16 17 18 19) *0, disabled.
[ 0.265460] ACPI: PCI Interrupt Link [LN5B] (IRQs 16 17 18 19) *0, disabled.
[ 0.265867] ACPI: PCI Interrupt Link [LN5C] (IRQs 16 17 18 19) *0, disabled.
[ 0.266276] ACPI: PCI Interrupt Link [LN5D] (IRQs 16 17 18 19) *0, disabled.
[ 0.266681] ACPI: PCI Interrupt Link [LN6A] (IRQs 16 17 18 19) *0, disabled.
[ 0.267090] ACPI: PCI Interrupt Link [LN6B] (IRQs 16 17 18 19) *0, disabled.
[ 0.267498] ACPI: PCI Interrupt Link [LN6C] (IRQs 16 17 18 19) *0, disabled.
[ 0.267906] ACPI: PCI Interrupt Link [LN6D] (IRQs 16 17 18 19) *0, disabled.
[ 0.268329] ACPI: PCI Interrupt Link [LUB0] (IRQs 20 21 22 23) *10
[ 0.268742] ACPI: PCI Interrupt Link [LUB2] (IRQs 20 21 22 23) *11
[ 0.269151] ACPI: PCI Interrupt Link [LMAC] (IRQs 20 21 22 23) *14
[ 0.269562] ACPI: PCI Interrupt Link [LAZA] (IRQs 20 21 22 23) *15
[ 0.269973] ACPI: PCI Interrupt Link [SGRU] (IRQs 20 21 22 23) *15
[ 0.270392] ACPI: PCI Interrupt Link [LSMB] (IRQs 20 21 22 23) *14
[ 0.270809] ACPI: PCI Interrupt Link [LPMU] (IRQs 20 21 22 23) *7
[ 0.271225] ACPI: PCI Interrupt Link [LSA0] (IRQs 20 21 22 23) *5
[ 0.271705] ACPI: PCI Interrupt Link [LATA] (IRQs 20 21 22 23) *0, disabled.
[ 0.272124] ACPI: PCI Interrupt Link [UB11] (IRQs 20 21 22 23) *0, disabled.
[ 0.272535] ACPI: PCI Interrupt Link [UB12] (IRQs 20 21 22 23) *0, disabled.
[ 0.272946] ACPI: PCI Interrupt Link [LRP0] (IRQs 20 21 22 23) *0, disabled.
[ 0.273358] ACPI: PCI Interrupt Link [LRP1] (IRQs 20 21 22 23) *0, disabled.
[ 0.273767] ACPI: PCI Interrupt Link [LRP2] (IRQs 20 21 22 23) *0, disabled.
[ 0.274182] ACPI: PCI Interrupt Link [LRP3] (IRQs 20 21 22 23) *10
[ 0.274600] ACPI: PCI Interrupt Link [LRP4] (IRQs 20 21 22 23) *11
[ 0.275016] ACPI: PCI Interrupt Link [LRP5] (IRQs 20 21 22 23) *9
[ 0.275431] ACPI: PCI Interrupt Link [LRP6] (IRQs 20 21 22 23) *5
[ 0.275520] ACPI: WMI: Mapper loaded
[ 0.276025] PCI: Using ACPI for IRQ routing
[ 0.280011] NET: Registered protocol family 8
[ 0.280013] NET: Registered protocol family 20
[ 0.280025] NetLabel: Initializing
[ 0.280025] NetLabel: domain hash size = 128
[ 0.280025] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.280033] NetLabel: unlabeled traffic allowed by default
[ 0.280044] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 31, 31
[ 0.280049] hpet0: 4 comparators, 64-bit 25.000000 MHz counter
[ 0.292007] pnp: PnP ACPI init
[ 0.292015] ACPI: bus type pnp registered
[ 0.302538] pnp: PnP ACPI: found 15 devices
[ 0.302540] ACPI: ACPI bus type pnp unregistered
[ 0.302544] PnPBIOS: Disabled by ACPI PNP
[ 0.302554] system 00:04: ioport range 0x4d0-0x4d1 has been reserved
[ 0.302557] system 00:04: ioport range 0x800-0x80f has been reserved
[ 0.302559] system 00:04: ioport range 0x4000-0x407f has been reserved
[ 0.302561] system 00:04: ioport range 0x4080-0x40ff has been reserved
[ 0.302564] system 00:04: ioport range 0x4400-0x447f has been reserved
[ 0.302566] system 00:04: ioport range 0x4480-0x44ff has been reserved
[ 0.302568] system 00:04: ioport range 0x4800-0x487f has been reserved
[ 0.302571] system 00:04: ioport range 0x4880-0x48ff has been reserved
[ 0.302574] system 00:04: iomem range 0xfefe2000-0xfefe3fff has been
reserved
[ 0.302577] system 00:04: iomem range 0xfefe1000-0xfefe1fff has been
reserved
[ 0.302579] system 00:04: iomem range 0xfee01000-0xfeefffff has been
reserved
[ 0.302582] system 00:04: iomem range 0xfed01000-0xfed01fff has been
reserved
[ 0.302588] system 00:07: ioport range 0x250-0x253 has been reserved
[ 0.302590] system 00:07: ioport range 0x256-0x25f has been reserved
[ 0.302592] system 00:07: iomem range 0xfec00000-0xfec00fff has been
reserved
[ 0.302595] system 00:07: iomem range 0xfee00000-0xfee00fff has been
reserved
[ 0.302600] system 00:08: ioport range 0x260-0x26f has been reserved
[ 0.302606] system 00:0b: ioport range 0xa00-0xa0f has been reserved
[ 0.302611] system 00:0c: ioport range 0x5000-0x507f has been reserved
[ 0.302613] system 00:0c: ioport range 0x5080-0x50ff has been reserved
[ 0.302618] system 00:0d: iomem range 0xf0000000-0xf1ffffff has been
reserved
[ 0.302624] system 00:0e: iomem range 0x0-0x9ffff could not be reserved
[ 0.302626] system 00:0e: iomem range 0xc0000-0xcffff could not be reserved
[ 0.302628] system 00:0e: iomem range 0xe0000-0xfffff could not be reserved
[ 0.302631] system 00:0e: iomem range 0x100000-0xcfffffff could not be
reserved
[ 0.302634] system 00:0e: iomem range 0xf0000000-0xffffffff could not be
reserved
[ 0.337632] pci 0000:00:09.0: PCI bridge, secondary bus 0000:01
[ 0.337634] pci 0000:00:09.0: IO window: disabled
[ 0.337638] pci 0000:00:09.0: MEM window: disabled
[ 0.337641] pci 0000:00:09.0: PREFETCH window: disabled
[ 0.337647] pci 0000:00:10.0: PCI bridge, secondary bus 0000:02
[ 0.337649] pci 0000:00:10.0: IO window: 0xd000-0xdfff
[ 0.337653] pci 0000:00:10.0: MEM window: 0xfcf00000-0xfdffffff
[ 0.337657] pci 0000:00:10.0: PREFETCH window:
0x000000de000000-0x000000efffffff
[ 0.337661] pci 0000:00:15.0: PCI bridge, secondary bus 0000:03
[ 0.337666] pci 0000:00:15.0: IO window: 0xe000-0xefff
[ 0.337677] pci 0000:00:15.0: MEM window: 0xfe000000-0xfeafffff
[ 0.337685] pci 0000:00:15.0: PREFETCH window:
0x000000fa000000-0x000000fbffffff
[ 0.337698] pci 0000:00:16.0: PCI bridge, secondary bus 0000:06
[ 0.337700] pci 0000:00:16.0: IO window: disabled
[ 0.337711] pci 0000:00:16.0: MEM window: 0xfeb00000-0xfebfffff
[ 0.337718] pci 0000:00:16.0: PREFETCH window: disabled
[ 0.337732] pci 0000:00:17.0: PCI bridge, secondary bus 0000:07
[ 0.337733] pci 0000:00:17.0: IO window: disabled
[ 0.337743] pci 0000:00:17.0: MEM window: disabled
[ 0.337751] pci 0000:00:17.0: PREFETCH window: disabled
[ 0.337764] pci 0000:00:18.0: PCI bridge, secondary bus 0000:08
[ 0.337766] pci 0000:00:18.0: IO window: disabled
[ 0.337776] pci 0000:00:18.0: MEM window: disabled
[ 0.337783] pci 0000:00:18.0: PREFETCH window: disabled
[ 0.337802] pci 0000:00:09.0: setting latency timer to 64
[ 0.337809] pci 0000:00:10.0: setting latency timer to 64
[ 0.338362] ACPI: PCI Interrupt Link [LRP3] enabled at IRQ 23
[ 0.338367] pci 0000:00:15.0: PCI INT A -> Link[LRP3] -> GSI 23 (level, low)
-> IRQ 23
[ 0.338375] pci 0000:00:15.0: setting latency timer to 64
[ 0.338919] ACPI: PCI Interrupt Link [LRP4] enabled at IRQ 22
[ 0.338923] pci 0000:00:16.0: PCI INT A -> Link[LRP4] -> GSI 22 (level, low)
-> IRQ 22
[ 0.338931] pci 0000:00:16.0: setting latency timer to 64
[ 0.339476] ACPI: PCI Interrupt Link [LRP5] enabled at IRQ 21
[ 0.339480] pci 0000:00:17.0: PCI INT A -> Link[LRP5] -> GSI 21 (level, low)
-> IRQ 21
[ 0.339489] pci 0000:00:17.0: setting latency timer to 64
[ 0.340036] ACPI: PCI Interrupt Link [LRP6] enabled at IRQ 20
[ 0.340040] pci 0000:00:18.0: PCI INT A -> Link[LRP6] -> GSI 20 (level, low)
-> IRQ 20
[ 0.340048] pci 0000:00:18.0: setting latency timer to 64
[ 0.340053] bus: 00 index 0 io port: [0x00-0xffff]
[ 0.340055] bus: 00 index 1 mmio: [0x000000-0xffffffffffffffff]
[ 0.340058] bus: 01 index 0 mmio: [0x0-0x0]
[ 0.340059] bus: 01 index 1 mmio: [0x0-0x0]
[ 0.340061] bus: 01 index 2 mmio: [0x0-0x0]
[ 0.340062] bus: 01 index 3 io port: [0x00-0xffff]
[ 0.340064] bus: 01 index 4 mmio: [0x000000-0xffffffffffffffff]
[ 0.340066] bus: 02 index 0 io port: [0xd000-0xdfff]
[ 0.340068] bus: 02 index 1 mmio: [0xfcf00000-0xfdffffff]
[ 0.340070] bus: 02 index 2 mmio: [0xde000000-0xefffffff]
[ 0.340071] bus: 02 index 3 mmio: [0x0-0x0]
[ 0.340073] bus: 03 index 0 io port: [0xe000-0xefff]
[ 0.340075] bus: 03 index 1 mmio: [0xfe000000-0xfeafffff]
[ 0.340076] bus: 03 index 2 mmio: [0xfa000000-0xfbffffff]
[ 0.340078] bus: 03 index 3 mmio: [0x0-0x0]
[ 0.340080] bus: 06 index 0 mmio: [0x0-0x0]
[ 0.340081] bus: 06 index 1 mmio: [0xfeb00000-0xfebfffff]
[ 0.340083] bus: 06 index 2 mmio: [0x0-0x0]
[ 0.340084] bus: 06 index 3 mmio: [0x0-0x0]
[ 0.340086] bus: 07 index 0 mmio: [0x0-0x0]
[ 0.340088] bus: 07 index 1 mmio: [0x0-0x0]
[ 0.340089] bus: 07 index 2 mmio: [0x0-0x0]
[ 0.340090] bus: 07 index 3 mmio: [0x0-0x0]
[ 0.340092] bus: 08 index 0 mmio: [0x0-0x0]
[ 0.340094] bus: 08 index 1 mmio: [0x0-0x0]
[ 0.340095] bus: 08 index 2 mmio: [0x0-0x0]
[ 0.340096] bus: 08 index 3 mmio: [0x0-0x0]
[ 0.340104] NET: Registered protocol family 2
[ 0.352044] IP route cache hash table entries: 32768 (order: 5, 131072
bytes)
[ 0.352267] TCP established hash table entries: 131072 (order: 8, 1048576
bytes)
[ 0.352719] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[ 0.352962] TCP: Hash tables configured (established 131072 bind 65536)
[ 0.352964] TCP reno registered
[ 0.360056] NET: Registered protocol family 1
[ 0.360180] checking if image is initramfs...<7>Switched to high resolution
mode on CPU 1
[ 0.504003] Switched to high resolution mode on CPU 0
[ 2.351196] it is
[ 4.481109] Freeing initrd memory: 53892k freed
[ 4.481316] Simple Boot Flag value 0x20 read from CMOS RAM was invalid
[ 4.481318] Simple Boot Flag at 0xff set to 0x1
[ 4.482201] Microcode Update Driver: v2.00 <[EMAIL PROTECTED]>,
Peter Oruba
[ 4.482401] audit: initializing netlink socket (disabled)
[ 4.482427] type=2000 audit(1227895955.481:1): initialized
[ 4.488365] highmem bounce pool size: 64 pages
[ 4.488369] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 4.490282] VFS: Disk quotas dquot_6.5.1
[ 4.490355] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 4.490466] msgmni has been set to 1638
[ 4.490638] alg: No test for stdrng (krng)
[ 4.490647] io scheduler noop registered
[ 4.490649] io scheduler anticipatory registered
[ 4.490651] io scheduler deadline registered
[ 4.490661] io scheduler cfq registered (default)
[ 4.513509] pci 0000:02:00.0: Boot video device
[ 4.529159] pcieport-driver 0000:00:15.0: setting latency timer to 64
[ 4.529326] pcieport-driver 0000:00:15.0: found MSI capability
[ 4.529419] pcieport-driver 0000:00:15.0: irq 47 for MSI/MSI-X
[ 4.529456] pci_express 0000:00:15.0:pcie00: allocate port service
[ 4.529664] pcieport-driver 0000:00:16.0: setting latency timer to 64
[ 4.529828] pcieport-driver 0000:00:16.0: found MSI capability
[ 4.529917] pcieport-driver 0000:00:16.0: irq 46 for MSI/MSI-X
[ 4.529954] pci_express 0000:00:16.0:pcie00: allocate port service
[ 4.530155] pcieport-driver 0000:00:17.0: setting latency timer to 64
[ 4.530320] pcieport-driver 0000:00:17.0: found MSI capability
[ 4.530409] pcieport-driver 0000:00:17.0: irq 45 for MSI/MSI-X
[ 4.530445] pci_express 0000:00:17.0:pcie00: allocate port service
[ 4.530647] pcieport-driver 0000:00:18.0: setting latency timer to 64
[ 4.530811] pcieport-driver 0000:00:18.0: found MSI capability
[ 4.530900] pcieport-driver 0000:00:18.0: irq 44 for MSI/MSI-X
[ 4.530937] pci_express 0000:00:18.0:pcie00: allocate port service
[ 4.531454] ACPI: AC Adapter [AC0] (on-line)
[ 6.029281] ACPI Exception (evregion-0419): AE_TIME, Returned by Handler for
[EmbeddedControl] [20080926]
[ 6.029287] ACPI Error (psparse-0524): Method parse/execution failed
[\_SB_.PCI0.SBRG.EC0_.SMBR] (Node f701e3c0), AE_TIME
[ 6.029348] ACPI Error (psparse-0524): Method parse/execution failed
[\_SB_.PCI0.SBRG.EC0_.BIF9] (Node f7030810), AE_TIME
[ 6.029406] ACPI Error (psparse-0524): Method parse/execution failed
[\_SB_.PCI0.BAT0._BIF] (Node f7030678), AE_TIME
[ 6.029465] ACPI Exception (battery-0329): AE_TIME, Evaluating _BIF
[20080926]
[ 6.029473] ACPI: Battery Slot [BAT0] (battery present)
[ 6.029603] input: Power Button (FF) as
/devices/LNXSYSTM:00/LNXPWRBN:00/input/input0
[ 6.029606] ACPI: Power Button (FF) [PWRF]
[ 6.029691] input: Power Button (CM) as
/devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input1
[ 6.029694] ACPI: Power Button (CM) [PWRB]
[ 6.029756] input: Sleep Button (CM) as
/devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input2
[ 6.029767] ACPI: Sleep Button (CM) [SLPB]
[ 6.029825] input: Lid Switch as
/devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input3
[ 8.028029] ACPI Exception (evregion-0419): AE_TIME, Returned by Handler for
[EmbeddedControl] [20080926]
[ 8.028034] ACPI Error (psparse-0524): Method parse/execution failed
[\_SB_.PCI0.SBRG.EC0_.STC5] (Node f701e168), AE_TIME
[ 8.028094] ACPI Error (psparse-0524): Method parse/execution failed
[\_SB_.PCI0.SBRG.EC0_.RPIN] (Node f701e138), AE_TIME
[ 8.028153] ACPI Error (psparse-0524): Method parse/execution failed
[\_SB_.LID_._LID] (Node f70321b0), AE_TIME
[ 8.028211] ACPI: Lid Switch [LID]
[ 8.028739] ACPI: SSDT BFFAE620, 0248 (r1 PmRef Cpu0Ist 3000 INTL
20051117)
[ 8.029371] ACPI: SSDT BFFAE900, 0765 (r1 PmRef Cpu0Cst 3001 INTL
20051117)
[ 8.030798] Monitor-Mwait will be used to enter C-1 state
[ 8.030801] Monitor-Mwait will be used to enter C-3 state
[ 8.030839] ACPI: CPU0 (power states: C1[C1] C2[C3])
[ 8.030889] processor ACPI_CPU:00: registered as cooling_device0
[ 8.030892] ACPI: Processor [P001] (supports 8 throttling states)
[ 8.031251] ACPI: SSDT BFFAE550, 00CC (r1 PmRef Cpu1Ist 3000 INTL
20051117)
[ 8.031807] ACPI: SSDT BFFAE870, 0085 (r1 PmRef Cpu1Cst 3000 INTL
20051117)
[ 8.033325] ACPI: CPU1 (power states: C1[C1] C2[C3])
[ 8.033363] processor ACPI_CPU:01: registered as cooling_device1
[ 8.033367] ACPI: Processor [P002] (supports 8 throttling states)
[ 9.040081] ACPI Exception (evregion-0419): AE_TIME, Returned by Handler for
[EmbeddedControl] [20080926]
[ 9.040087] ACPI Error (psparse-0524): Method parse/execution failed
[\_TZ_.RTMP] (Node f701eba0), AE_TIME
[ 9.040145] ACPI Error (psparse-0524): Method parse/execution failed
[\_TZ_.THRM._TMP] (Node f701eab0), AE_TIME
[ 9.040261] Asus Laptop ACPI Extras version 0.30
[ 9.047473] BSTS called, 0xc54f returned
[ 9.047476] unsupported model F5GL, trying default values
[ 9.047478] send /proc/acpi/dsdt to the developers
[ 9.047635] isapnp: Scanning for PnP cards...
[ 9.401035] isapnp: No Plug & Play device found
[ 9.429298] Serial: 8250/16550 driver4 ports, IRQ sharing enabled
[ 9.431311] brd: module loaded
[ 9.431373] input: Macintosh mouse button emulation as
/devices/virtual/input/input4
[ 9.431487] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64
irq 1,12
[ 9.435326] i8042.c: Detected active multiplexing controller, rev 1.1.
[ 9.436317] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 9.436322] serio: i8042 AUX0 port at 0x60,0x64 irq 12
[ 9.436324] serio: i8042 AUX1 port at 0x60,0x64 irq 12
[ 9.436326] serio: i8042 AUX2 port at 0x60,0x64 irq 12
[ 9.436329] serio: i8042 AUX3 port at 0x60,0x64 irq 12
[ 9.440099] mice: PS/2 mouse device common for all mice
[ 9.440168] rtc_cmos 00:06: RTC can wake from S4
[ 9.440231] rtc_cmos 00:06: rtc core: registered rtc_cmos as rtc0
[ 9.440280] rtc0: alarms up to one year, y3k, 114 bytes nvram, hpet irqs
[ 9.440376] EISA: Probing bus 0 at eisa.0
[ 9.440389] Cannot allocate resource for EISA slot 4
[ 9.440392] Cannot allocate resource for EISA slot 5
[ 9.440402] EISA: Detected 0 cards.
[ 9.440567] cpuidle: using governor ladder
[ 9.440876] cpuidle: using governor menu
[ 9.441435] TCP cubic registered
[ 9.442405] Marking TSC unstable due to TSC halts in idle
[ 9.442692] Using IPI No-Shortcut mode
[ 9.442893] registered taskstats version 1
[ 9.442999] Magic number: 0:214:242
[ 9.443024] tty ttysf: hash matches
[ 9.443178] rtc_cmos 00:06: setting system clock to 2008-11-28 18:12:41 UTC
(1227895961)
[ 9.443181] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 9.443182] EDD information not available.
[ 9.443495] Freeing unused kernel memory: 480k freed
[ 9.443648] Write protecting the kernel text: 2652k
[ 9.443731] Write protecting the kernel read-only data: 1012k
[ 9.481911] input: AT Translated Set 2 keyboard as
/devices/platform/i8042/serio0/input/input5
[ 9.556123] fuse init (API version 7.10)
[ 10.061069] usbcore: registered new interface driver usbfs
[ 10.061106] usbcore: registered new interface driver hub
[ 10.068232] usbcore: registered new device driver usb
[ 10.070096] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 10.070743] ACPI: PCI Interrupt Link [LUB0] enabled at IRQ 23
[ 10.070748] ohci_hcd 0000:00:04.0: PCI INT A -> Link[LUB0] -> GSI 23 (level,
low) -> IRQ 23
[ 10.070832] ohci_hcd 0000:00:04.0: setting latency timer to 64
[ 10.070835] ohci_hcd 0000:00:04.0: OHCI Host Controller
[ 10.070889] ohci_hcd 0000:00:04.0: new USB bus registered, assigned bus
number 1
[ 10.070914] ohci_hcd 0000:00:04.0: irq 23, io mem 0xfce7f000
[ 10.127205] usb usb1: configuration #1 chosen from 1 choice
[ 10.127247] hub 1-0:1.0: USB hub found
[ 10.127257] hub 1-0:1.0: 8 ports detected
[ 10.207963] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 10.207966] Warning! ehci_hcd should always be loaded before uhci_hcd and
ohci_hcd, not after
[ 10.210189] forcedeth: Reverse Engineered nForce ethernet driver. Version
0.61.
[ 10.210859] ACPI: PCI Interrupt Link [LMAC] enabled at IRQ 22
[ 10.210867] forcedeth 0000:00:0a.0: PCI INT A -> Link[LMAC] -> GSI 22
(level, low) -> IRQ 22
[ 10.210873] forcedeth 0000:00:0a.0: setting latency timer to 64
[ 10.223916] SCSI subsystem initialized
[ 10.305864] libata version 3.00 loaded.
[ 10.604057] usb 1-7: new full speed USB device using ohci_hcd and address 2
[ 10.728870] forcedeth 0000:00:0a.0: ifname eth0, PHY OUI 0x732 @ 1, addr
00:23:54:58:e6:72
[ 10.728875] forcedeth 0000:00:0a.0: highdma csum pwrctl mgmt timirq gbit
lnktim msi desc-v3
[ 10.729673] ACPI: PCI Interrupt Link [LUB2] enabled at IRQ 21
[ 10.729678] ehci_hcd 0000:00:04.1: PCI INT B -> Link[LUB2] -> GSI 21 (level,
low) -> IRQ 21
[ 10.729745] ehci_hcd 0000:00:04.1: setting latency timer to 64
[ 10.729749] ehci_hcd 0000:00:04.1: EHCI Host Controller
[ 10.729783] ehci_hcd 0000:00:04.1: new USB bus registered, assigned bus
number 2
[ 10.729808] ehci_hcd 0000:00:04.1: debug port 1
[ 10.729813] ehci_hcd 0000:00:04.1: cache line size of 32 is not supported
[ 10.729832] ehci_hcd 0000:00:04.1: irq 21, io mem 0xfce7ec00
[ 10.792046] ehci_hcd 0000:00:04.1: USB 2.0 started, EHCI 1.00
[ 10.792177] usb usb2: configuration #1 chosen from 1 choice
[ 10.792204] hub 2-0:1.0: USB hub found
[ 10.792210] hub 2-0:1.0: 8 ports detected
[ 10.792447] ahci 0000:00:0b.0: version 3.0
[ 10.793029] ACPI: PCI Interrupt Link [LSA0] enabled at IRQ 20
[ 10.793033] ahci 0000:00:0b.0: PCI INT A -> Link[LSA0] -> GSI 20 (level,
low) -> IRQ 20
[ 10.793103] ahci 0000:00:0b.0: irq 43 for MSI/MSI-X
[ 10.793144] ahci 0000:00:0b.0: AHCI 0001.0200 32 slots 2 ports 3 Gbps 0x3
impl SATA mode
[ 10.793147] ahci 0000:00:0b.0: flags: 64bit ncq sntf led pmp pio slum part
[ 10.793150] ahci 0000:00:0b.0: setting latency timer to 64
[ 10.793332] scsi0 : ahci
[ 10.793427] scsi1 : ahci
[ 10.793490] ata1: SATA max UDMA/133 irq_stat 0x00400040, connection status
changed irq 43
[ 10.793493] ata2: SATA max UDMA/133 irq_stat 0x00400040, connection status
changed irq 43
[ 11.188017] usb 1-7: device not accepting address 2, error -62
[ 11.244022] hub 1-0:1.0: unable to enumerate USB device on port 7
[ 11.484020] usb 2-7: new high speed USB device using ehci_hcd and address 2
[ 11.630612] usb 2-7: configuration #1 chosen from 1 choice
[ 11.680028] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 11.933256] ata1.00: ATA-8: ST9250320AS, 0303, max UDMA/133
[ 11.933258] ata1.00: 488397168 sectors, multi 16: LBA48 NCQ (depth 31/32)
[ 11.935336] ata1.00: configured for UDMA/133
[ 12.820066] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 12.835029] ata2.00: ATAPI: TSSTcorp CDDVDW TS-L633A, AS00, max UDMA/100,
ATAPI AN
[ 12.835038] ata2.00: applying bridge limits
[ 12.849157] ata2.00: configured for UDMA/100
[ 12.850966] scsi 0:0:0:0: Direct-Access ATA ST9250320AS 0303
PQ: 0 ANSI: 5
[ 12.853496] scsi 1:0:0:0: CD-ROM TSSTcorp CDDVDW TS-L633A AS00
PQ: 0 ANSI: 5
[ 12.859953] scsi 0:0:0:0: Attached scsi generic sg0 type 0
[ 12.859987] scsi 1:0:0:0: Attached scsi generic sg1 type 5
[ 12.870999] Driver 'sd' needs updating - please use bus_type methods
[ 12.871111] sd 0:0:0:0: [sda] 488397168 512-byte hardware sectors: (250
GB/232 GiB)
[ 12.871126] sd 0:0:0:0: [sda] Write Protect is off
[ 12.871128] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 12.871149] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled,
doesn't support DPO or FUA
[ 12.871216] sd 0:0:0:0: [sda] 488397168 512-byte hardware sectors: (250
GB/232 GiB)
[ 12.871229] sd 0:0:0:0: [sda] Write Protect is off
[ 12.871231] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 12.871252] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled,
doesn't support DPO or FUA
[ 12.871254] sda:<4>Driver 'sr' needs updating - please use bus_type methods
[ 13.000068] Clocksource tsc unstable (delta = -326743147 ns)
[ 13.110171] sda1 sda2 < sda5 sda6 >
[ 13.147230] sd 0:0:0:0: [sda] Attached SCSI disk
[ 13.167872] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda
tray
[ 13.167877] Uniform CD-ROM driver Revision: 3.20
[ 13.167977] sr 1:0:0:0: Attached scsi CD-ROM sr0
[ 13.528019] PM: Starting manual resume from disk
[ 13.528022] PM: Resume from partition 8:5
[ 13.528024] PM: Checking hibernation image.
[ 13.528232] PM: Resume from disk failed.
[ 13.626716] kjournald starting. Commit interval 5 seconds
[ 13.626726] EXT3-fs: mounted filesystem with ordered data mode.
[ 18.010338] udevd version 124 started
[ 18.545714] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 18.570453] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 19.391920] HDA Intel 0000:00:08.0: power state changed by ACPI to D0
[ 19.392505] ACPI: PCI Interrupt Link [LAZA] enabled at IRQ 23
[ 19.392510] HDA Intel 0000:00:08.0: PCI INT A -> Link[LAZA] -> GSI 23
(level, low) -> IRQ 23
[ 19.392777] HDA Intel 0000:00:08.0: setting latency timer to 64
[ 19.840473] Linux video capture interface: v2.00
[ 19.875143] uvcvideo: Found UVC 1.00 device USB2.0 1.3M UVC WebCam
(04f2:b012)
[ 19.877285] input: USB2.0 1.3M UVC WebCam as
/devices/pci0000:00/0000:00:04.1/usb2/2-7/2-7:1.0/input/input6
[ 20.089307] cfg80211: Using static regulatory domain info
[ 20.089310] cfg80211: Regulatory domain: US
[ 20.089312] (start_freq - end_freq @ bandwidth), (max_antenna_gain,
max_eirp)
[ 20.089315] (2402000 KHz - 2472000 KHz @ 40000 KHz), (600 mBi, 2700 mBm)
[ 20.089317] (5170000 KHz - 5190000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
[ 20.089319] (5190000 KHz - 5210000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
[ 20.089321] (5210000 KHz - 5230000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
[ 20.089323] (5230000 KHz - 5330000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
[ 20.089325] (5735000 KHz - 5835000 KHz @ 40000 KHz), (600 mBi, 3000 mBm)
[ 20.089327] cfg80211: Calling CRDA for country: US
[ 20.089850] usbcore: registered new interface driver uvcvideo
[ 20.089865] USB Video Class driver (v0.1.0)
[ 20.820641] input: PC Speaker as /devices/platform/pcspkr/input/input7
[ 20.873870] ath9k: 0.1
[ 20.874509] ACPI: PCI Interrupt Link [LN4A] enabled at IRQ 19
[ 20.874519] ath9k 0000:06:00.0: PCI INT A -> Link[LN4A] -> GSI 19 (level,
low) -> IRQ 19
[ 20.874529] ath9k 0000:06:00.0: setting latency timer to 64
[ 21.341800] phy0: Selected rate control algorithm 'ath9k_rate_control'
[ 21.718261] Registered led device: ath9k-phy0:radio
[ 21.718293] Registered led device: ath9k-phy0:assoc
[ 21.718337] Registered led device: ath9k-phy0:tx
[ 21.718366] Registered led device: ath9k-phy0:rx
[ 21.718849] phy0: Atheros 9280: mem=0xf8680000, irq=19
[ 22.035777] Synaptics Touchpad, model: 1, fw: 6.1, id: 0xa3a0b3, caps:
0xa04713/0x10008
[ 22.106192] input: SynPS/2 Synaptics TouchPad as
/devices/platform/i8042/serio4/input/input8
[ 22.600047] ACPI Exception (evregion-0419): AE_TIME, Returned by Handler for
[EmbeddedControl] [20080926]
[ 22.600064] ACPI Error (psparse-0524): Method parse/execution failed
[\_SB_.PCI0.SBRG.EC0_.SADC] (Node f701e0f0), AE_TIME
[ 22.600154] ACPI Error (psparse-0524): Method parse/execution failed
[\_SB_.PCI0.SBRG.EC0_.STBR] (Node f701e090), AE_TIME
[ 22.600214] ACPI Error (psparse-0524): Method parse/execution failed
[\_SB_.PCI0.IXVE.VGA_.LCDD._BCM] (Node f70163c0), AE_TIME
[ 22.600327] acpi device:1a: registered as cooling_device2
[ 22.600514] input: Video Bus as
/devices/LNXSYSTM:00/device:00/PNP0A03:00/device:11/device:12/input/input9
[ 22.652223] ACPI: Video Device [VGA] (multi-head: yes rom: no post: no)
[ 24.229055] lp: driver loaded but no devices found
[ 24.512933] Adding 875500k swap on /dev/sda5. Priority:-1 extents:1
across:875500k
[ 25.066355] EXT3 FS on sda1, internal journal
[ 25.924887] kjournald starting. Commit interval 5 seconds
[ 25.925325] EXT3 FS on sda6, internal journal
[ 25.925330] EXT3-fs: mounted filesystem with ordered data mode.
[ 26.273169] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 27.790024] warning: `avahi-daemon' uses 32-bit capabilities (legacy support
in use)
[ 28.436883] vboxdrv: Trying to deactivate the NMI watchdog permanently...
[ 28.436889] vboxdrv: Successfully done.
[ 28.436892] vboxdrv: Found 2 processor cores.
[ 28.437073] vboxdrv: fAsync=0 offMin=0x3e9 offMax=0x1eac
[ 28.437081] vboxdrv: TSC mode is 'synchronous', kernel timer mode is
'normal'.
[ 28.437085] vboxdrv: Successfully loaded version 2.0.4_OSE (interface
0x00090000).
[ 32.870506] Linux agpgart interface v0.103
[ 33.211072] nvidia: module license 'NVIDIA' taints kernel.
[ 33.468867] ACPI: PCI Interrupt Link [SGRU] enabled at IRQ 22
[ 33.468877] nvidia 0000:02:00.0: PCI INT A -> Link[SGRU] -> GSI 22 (level,
low) -> IRQ 22
[ 33.468892] nvidia 0000:02:00.0: setting latency timer to 64
[ 33.471747] NVRM: loading NVIDIA UNIX x86 Kernel Module 177.80 Wed Oct 1
14:38:10 PDT 2008
[ 34.328650] forcedeth 0000:00:0a.0: irq 42 for MSI/MSI-X
[ 34.328856] eth0: no link during initialization.
[ 35.365656] ForceXPAon: 0
[ 35.650899] ForceXPAon: 0
[ 35.799131] NET: Registered protocol family 17
[ 35.838941] ForceXPAon: 0
[ 36.082942] ForceXPAon: 0
[ 36.349950] ForceXPAon: 0
[ 36.525944] ForceXPAon: 0
[ 36.763020] ForceXPAon: 0
[ 56.073979] ForceXPAon: 0
[ 56.258957] ForceXPAon: 0
[ 56.519332] ForceXPAon: 0
[ 78.365100] ACPI Exception (evregion-0419): AE_TIME, Returned by Handler for
[EmbeddedControl] [20080926]
[ 78.365123] ACPI Error (psparse-0524): Method parse/execution failed
[\_SB_.PCI0.SBRG.EC0_.SMBR] (Node f701e3c0), AE_TIME
[ 78.365287] ACPI Error (psparse-0524): Method parse/execution failed
[\_SB_.PCI0.SBRG.EC0_.BIF9] (Node f7030810), AE_TIME
[ 78.365417] ACPI Error (psparse-0524): Method parse/execution failed
[\_SB_.PCI0.BAT0._BIF] (Node f7030678), AE_TIME
[ 78.365548] ACPI Exception (battery-0329): AE_TIME, Evaluating _BIF
[20080926]
[ 79.873325] ACPI Exception (evregion-0419): AE_TIME, Returned by Handler for
[EmbeddedControl] [20080926]
[ 79.873341] ACPI Error (psparse-0524): Method parse/execution failed
[\_SB_.PCI0.SBRG.EC0_.SMBR] (Node f701e3c0), AE_TIME
[ 79.873433] ACPI Error (psparse-0524): Method parse/execution failed
[\_SB_.PCI0.SBRG.EC0_.BIF9] (Node f7030810), AE_TIME
[ 79.873500] ACPI Error (psparse-0524): Method parse/execution failed
[\_SB_.PCI0.BAT0._BIF] (Node f7030678), AE_TIME
[ 79.873563] ACPI Exception (battery-0329): AE_TIME, Evaluating _BIF
[20080926]
[ 86.056318] ACPI Exception (evregion-0419): AE_TIME, Returned by Handler for
[EmbeddedControl] [20080926]
[ 86.056343] ACPI Error (psparse-0524): Method parse/execution failed
[\_SB_.PCI0.SBRG.EC0_.SADC] (Node f701e0f0), AE_TIME
[ 86.056447] ACPI Error (psparse-0524): Method parse/execution failed
[\_SB_.PCI0.SBRG.EC0_.STBR] (Node f701e090), AE_TIME
[ 86.056507] ACPI Error (psparse-0524): Method parse/execution failed
[\_SB_.PCI0.IXVE.VGA_.LCDD._BCM] (Node f70163c0), AE_TIME
[ 86.086923] ForceXPAon: 0
[ 86.274917] ForceXPAon: 0
[ 86.522916] ForceXPAon: 0
[ 89.064035] ACPI Exception (evregion-0419): AE_TIME, Returned by Handler for
[EmbeddedControl] [20080926]
[ 89.064062] ACPI Error (psparse-0524): Method parse/execution failed
[\_SB_.PCI0.SBRG.EC0_.SADC] (Node f701e0f0), AE_TIME
[ 89.064223] ACPI Error (psparse-0524): Method parse/execution failed
[\_SB_.PCI0.SBRG.EC0_.STBR] (Node f701e090), AE_TIME
[ 89.064353] ACPI Error (psparse-0524): Method parse/execution failed
[\_SB_.PCI0.IXVE.VGA_.LCDD._BCM] (Node f70163c0), AE_TIME
[ 92.081069] ACPI Exception (evregion-0419): AE_TIME, Returned by Handler for
[EmbeddedControl] [20080926]
[ 92.081094] ACPI Error (psparse-0524): Method parse/execution failed
[\_SB_.PCI0.SBRG.EC0_.SADC] (Node f701e0f0), AE_TIME
[ 92.081250] ACPI Error (psparse-0524): Method parse/execution failed
[\_SB_.PCI0.SBRG.EC0_.STBR] (Node f701e090), AE_TIME
[ 92.081380] ACPI Error (psparse-0524): Method parse/execution failed
[\_SB_.PCI0.IXVE.VGA_.LCDD._BCM] (Node f70163c0), AE_TIME
[ 95.092095] ACPI Exception (evregion-0419): AE_TIME, Returned by Handler for
[EmbeddedControl] [20080926]
[ 95.092121] ACPI Error (psparse-0524): Method parse/execution failed
[\_SB_.PCI0.SBRG.EC0_.SADC] (Node f701e0f0), AE_TIME
[ 95.092278] ACPI Error (psparse-0524): Method parse/execution failed
[\_SB_.PCI0.SBRG.EC0_.STBR] (Node f701e090), AE_TIME
[ 95.092408] ACPI Error (psparse-0524): Method parse/execution failed
[\_SB_.PCI0.IXVE.VGA_.LCDD._BCM] (Node f70163c0), AE_TIME
[ 98.140068] ACPI Exception (evregion-0419): AE_TIME, Returned by Handler for
[EmbeddedControl] [20080926]
[ 98.140085] ACPI Error (psparse-0524): Method parse/execution failed
[\_SB_.PCI0.SBRG.EC0_.SADC] (Node f701e0f0), AE_TIME
[ 98.140171] ACPI Error (psparse-0524): Method parse/execution failed
[\_SB_.PCI0.SBRG.EC0_.STBR] (Node f701e090), AE_TIME
[ 98.140231] ACPI Error (psparse-0524): Method parse/execution failed
[\_SB_.PCI0.IXVE.VGA_.LCDD._BCM] (Node f70163c0), AE_TIME
[ 101.148056] ACPI Exception (evregion-0419): AE_TIME, Returned by Handler for
[EmbeddedControl] [20080926]
[ 101.148082] ACPI Error (psparse-0524): Method parse/execution failed
[\_SB_.PCI0.SBRG.EC0_.SADC] (Node f701e0f0), AE_TIME
[ 101.148239] ACPI Error (psparse-0524): Method parse/execution failed
[\_SB_.PCI0.SBRG.EC0_.STBR] (Node f701e090), AE_TIME
[ 101.148369] ACPI Error (psparse-0524): Method parse/execution failed
[\_SB_.PCI0.IXVE.VGA_.LCDD._BCM] (Node f70163c0), AE_TIME
[ 104.160069] ACPI Exception (evregion-0419): AE_TIME, Returned by Handler for
[EmbeddedControl] [20080926]
[ 104.160094] ACPI Error (psparse-0524): Method parse/execution failed
[\_SB_.PCI0.SBRG.EC0_.SADC] (Node f701e0f0), AE_TIME
[ 104.160252] ACPI Error (psparse-0524): Method parse/execution failed
[\_SB_.PCI0.SBRG.EC0_.STBR] (Node f701e090), AE_TIME
[ 104.160382] ACPI Error (psparse-0524): Method parse/execution failed
[\_SB_.PCI0.IXVE.VGA_.LCDD._BCM] (Node f70163c0), AE_TIME
[ 107.169080] ACPI Exception (evregion-0419): AE_TIME, Returned by Handler for
[EmbeddedControl] [20080926]
[ 107.169105] ACPI Error (psparse-0524): Method parse/execution failed
[\_SB_.PCI0.SBRG.EC0_.SADC] (Node f701e0f0), AE_TIME
[ 107.169262] ACPI Error (psparse-0524): Method parse/execution failed
[\_SB_.PCI0.SBRG.EC0_.STBR] (Node f701e090), AE_TIME
[ 107.169392] ACPI Error (psparse-0524): Method parse/execution failed
[\_SB_.PCI0.IXVE.VGA_.LCDD._BCM] (Node f70163c0), AE_TIME
[ 110.176077] ACPI Exception (evregion-0419): AE_TIME, Returned by Handler for
[EmbeddedControl] [20080926]
[ 110.176102] ACPI Error (psparse-0524): Method parse/execution failed
[\_SB_.PCI0.SBRG.EC0_.SADC] (Node f701e0f0), AE_TIME
[ 110.176259] ACPI Error (psparse-0524): Method parse/execution failed
[\_SB_.PCI0.SBRG.EC0_.STBR] (Node f701e090), AE_TIME
[ 110.176389] ACPI Error (psparse-0524): Method parse/execution failed
[\_SB_.PCI0.IXVE.VGA_.LCDD._BCM] (Node f70163c0), AE_TIME
[ 113.189021] ACPI Exception (evregion-0419): AE_TIME, Returned by Handler for
[EmbeddedControl] [20080926]
[ 113.189046] ACPI Error (psparse-0524): Method parse/execution failed
[\_SB_.PCI0.SBRG.EC0_.SADC] (Node f701e0f0), AE_TIME
[ 113.189203] ACPI Error (psparse-0524): Method parse/execution failed
[\_SB_.PCI0.SBRG.EC0_.STBR] (Node f701e090), AE_TIME
[ 113.189332] ACPI Error (psparse-0524): Method parse/execution failed
[\_SB_.PCI0.IXVE.VGA_.LCDD._BCM] (Node f70163c0), AE_TIME
[ 116.209070] ACPI Exception (evregion-0419): AE_TIME, Returned by Handler for
[EmbeddedControl] [20080926]
[ 116.209096] ACPI Error (psparse-0524): Method parse/execution failed
[\_SB_.PCI0.SBRG.EC0_.SADC] (Node f701e0f0), AE_TIME
[ 116.209254] ACPI Error (psparse-0524): Method parse/execution failed
[\_SB_.PCI0.SBRG.EC0_.STBR] (Node f701e090), AE_TIME
[ 116.209384] ACPI Error (psparse-0524): Method parse/execution failed
[\_SB_.PCI0.IXVE.VGA_.LCDD._BCM] (Node f70163c0), AE_TIME
[ 119.221069] ACPI Exception (evregion-0419): AE_TIME, Returned by Handler for
[EmbeddedControl] [20080926]
[ 119.221096] ACPI Error (psparse-0524): Method parse/execution failed
[\_SB_.PCI0.SBRG.EC0_.SADC] (Node f701e0f0), AE_TIME
[ 119.221254] ACPI Error (psparse-0524): Method parse/execution failed
[\_SB_.PCI0.SBRG.EC0_.STBR] (Node f701e090), AE_TIME
[ 119.221385] ACPI Error (psparse-0524): Method parse/execution failed
[\_SB_.PCI0.IXVE.VGA_.LCDD._BCM] (Node f70163c0), AE_TIME
[ 119.608854] CPU0 attaching NULL sched-domain.
[ 119.608864] CPU1 attaching NULL sched-domain.
[ 119.610147] CPU0 attaching sched-domain:
[ 119.610152] domain 0: span 0-1 level MC
[ 119.610157] groups: 0 1
[ 119.610167] CPU1 attaching sched-domain:
[ 119.610172] domain 0: span 0-1 level MC
[ 119.610176] groups: 1 0
[ 126.073937] ForceXPAon: 0
[ 126.253947] ForceXPAon: 0
[ 126.485946] ForceXPAon: 0
[ 176.078956] ForceXPAon: 0
[ 176.257941] ForceXPAon: 0
[ 176.489948] ForceXPAon: 0
-----------END CAT-----------------
--
Configure bugmail: http://bugzilla.kernel.org/userprefs.cgi?tab=email
------- You are receiving this mail because: -------
You are the assignee for the bug, or are watching the assignee.
-------------------------------------------------------------------------
This SF.Net email is sponsored by the Moblin Your Move Developer's challenge
Build the coolest Linux based applications with Moblin SDK & win great prizes
Grand prize is a trip for two to an Open Source event anywhere in the world
http://moblin-contest.org/redirect.php?banner_id=100&url=/
_______________________________________________
acpi-bugzilla mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/acpi-bugzilla
