http://bugzilla.kernel.org/show_bug.cgi?id=11665





------- Comment #24 from bugzi...@tut.by  2009-01-10 11:17 -------
Hello.

Sorry for late reply.

This is done just after boot:

[root#pc-linux:~]: cat /proc/interrupts
           CPU0
  0:         98   IO-APIC-edge      timer
  1:      12453   IO-APIC-edge      i8042
  3:         63   IO-APIC-edge      lirc_serial
  4:          6   IO-APIC-edge
  6:          5   IO-APIC-edge      floppy
  7:     485890   IO-APIC-edge      parport0
  8:          9   IO-APIC-edge      rtc0
  9:          0   IO-APIC-fasteoi   acpi
 12:      85839   IO-APIC-edge      i8042
 14:          0   IO-APIC-edge      ide0
 15:      86338   IO-APIC-edge      ide1
 16:     555788   IO-APIC-fasteoi   uhci_hcd:usb1, uhci_hcd:usb4, nvidia
 18:      48953   IO-APIC-fasteoi   uhci_hcd:usb3, ata_piix
 19:          0   IO-APIC-fasteoi   uhci_hcd:usb2
 20:      50243   IO-APIC-fasteoi   eth0
 23:     442186   IO-APIC-fasteoi   ehci_hcd:usb5, EMU10K1
NMI:          0   Non-maskable interrupts
LOC:    1296844   Local timer interrupts
RES:          0   Rescheduling interrupts
CAL:          0   function call interrupts
TLB:          0   TLB shootdowns
TRM:          0   Thermal event interrupts
SPU:          0   Spurious interrupts
ERR:          0
MIS:          0
[root#pc-linux:~]: suspend.now.ram
Stopping lirc daemon: lircmd lircd.
Switching from vt7 to vt1
Calling save_state
Allocated buffer at 0x2010 (base is 0x0)
ES: 0x0201 EBX: 0x0000
Calling restore_state_from
Function not supported?
switching back to vt7
Starting lirc daemon: lircd.
Setting drive speed of device /dev/cdrom to 1.. OK
[root#pc-linux:~]: cat /proc/interrupts
           CPU0
  0:         98   IO-APIC-edge      timer
  1:      12525   IO-APIC-edge      i8042
  3:         63   IO-APIC-edge
  4:          6   IO-APIC-edge
  6:          5   IO-APIC-edge      floppy
  7:     485890   IO-APIC-edge      parport0
  8:          9   IO-APIC-edge      rtc0
  9:     100001   IO-APIC-fasteoi   acpi
 12:      93920   IO-APIC-edge      i8042
 14:          0   IO-APIC-edge      ide0
 15:      87486   IO-APIC-edge      ide1
 16:     564367   IO-APIC-fasteoi   uhci_hcd:usb1, uhci_hcd:usb4, nvidia
 18:      53701   IO-APIC-fasteoi   uhci_hcd:usb3, ata_piix
 19:          0   IO-APIC-fasteoi   uhci_hcd:usb2
 20:      51401   IO-APIC-fasteoi   eth0
 23:     448184   IO-APIC-fasteoi   ehci_hcd:usb5, EMU10K1
NMI:          0   Non-maskable interrupts
LOC:    1320339   Local timer interrupts
RES:          0   Rescheduling interrupts
CAL:          0   function call interrupts
TLB:          0   TLB shootdowns
TRM:          0   Thermal event interrupts
SPU:          0   Spurious interrupts
ERR:          0
MIS:          0


-- 
Configure bugmail: http://bugzilla.kernel.org/userprefs.cgi?tab=email
------- You are receiving this mail because: -------
You are on the CC list for the bug, or are watching someone who is.

------------------------------------------------------------------------------
Check out the new SourceForge.net Marketplace.
It is the best place to buy or sell services for
just about anything Open Source.
http://p.sf.net/sfu/Xq1LFB
_______________________________________________
acpi-bugzilla mailing list
acpi-bugzilla@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/acpi-bugzilla

Reply via email to