http://bugzilla.kernel.org/show_bug.cgi?id=12270
--- Comment #48 from Anders Henke <anders.he...@1und1.de> 2009-04-06 10:17:31 --- Second boot attempt, same kernel als in comment #47, but using "noacpi"; the kernel also stalls during boot: ---cut LILO 22.8 boot: lxser noacpi Loading lxser............................................... BIOS data check successful [ 0.000000] Linux version 2.6.29.1 (and...@ista) (gcc version 4.3.2 (Debian 4.3.2-1.1) ) #1 SMP Mon Apr 6 10:43:08 CEST 2009 [ 0.000000] KERNEL supported cpus: [ 0.000000] Intel GenuineIntel [ 0.000000] AMD AuthenticAMD [ 0.000000] NSC Geode by NSC [ 0.000000] Cyrix CyrixInstead [ 0.000000] Centaur CentaurHauls [ 0.000000] Transmeta GenuineTMx86 [ 0.000000] Transmeta TransmetaCPU [ 0.000000] UMC UMC UMC UMC [ 0.000000] PAT WC disabled due to known CPU erratum. [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 00000000000a0000 (usable) [ 0.000000] BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 000000003fff0000 (usable) [ 0.000000] BIOS-e820: 000000003fff0000 - 000000003fff3000 (ACPI NVS) [ 0.000000] BIOS-e820: 000000003fff3000 - 0000000040000000 (ACPI data) [ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved) [ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) [ 0.000000] BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved) [ 0.000000] DMI 2.3 present. [ 0.000000] last_pfn = 0x3fff0 max_arch_pfn = 0x1000000 [ 0.000000] ACPI: RSDP 000F68C0, 0014 (r0 VIA694) [ 0.000000] ACPI: RSDT 3FFF3000, 002C (r1 VIA694 AWRDACPI 42302E31 AWRD 0) [ 0.000000] ACPI: FACP 3FFF3040, 0074 (r1 VIA694 AWRDACPI 42302E31 AWRD 0) [ 0.000000] FADT: X_PM1a_EVT_BLK.bit_width (16) does not match PM1_EVT_LEN (4) [ 0.000000] ACPI: DSDT 3FFF30C0, 2A01 (r1 VIA694 AWRDACPI 1000 MSFT 100000C) [ 0.000000] ACPI: FACS 3FFF0000, 0040 [ 0.000000] ACPI: APIC 3FFF5B00, 005C (r1 VIA694 33303033 0) [ 0.000000] 133MB HIGHMEM available. [ 0.000000] 889MB LOWMEM available. [ 0.000000] mapped low ram: 0 - 379fe000 [ 0.000000] low ram: 00000000 - 379fe000 [ 0.000000] bootmap 00008000 - 0000ef40 [ 0.000000] (8 early reservations) ==> bootmem [0000000000 - 00379fe000] [ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000] [ 0.000000] #1 [0000001000 - 0000002000] EX TRAMPOLINE ==> [0000001000 - 0000002000] [ 0.000000] #2 [0000006000 - 0000007000] TRAMPOLINE ==> [0000006000 - 0000007000] [ 0.000000] #3 [0000100000 - 000064eb14] TEXT DATA BSS ==> [0000100000 - 000064eb14] [ 0.000000] #4 [000064f000 - 0000657000] INIT_PG_TABLE ==> [000064f000 - 0000657000] [ 0.000000] #5 [000009f000 - 0000100000] BIOS reserved ==> [000009f000 - 0000100000] [ 0.000000] #6 [0000007000 - 0000008000] PGTABLE ==> [0000007000 - 0000008000] [ 0.000000] #7 [0000008000 - 000000f000] BOOTMAP ==> [0000008000 - 000000f000] [ 0.000000] found SMP MP-table at [c00f4ff0] 000f4ff0 [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0x00000000 -> 0x00001000 [ 0.000000] Normal 0x00001000 -> 0x000379fe [ 0.000000] HighMem 0x000379fe -> 0x0003fff0 [ 0.000000] Movable zone start PFN for each node [ 0.000000] early_node_map[2] active PFN ranges [ 0.000000] 0: 0x00000000 -> 0x000000a0 [ 0.000000] 0: 0x00000100 -> 0x0003fff0 [ 0.000000] ACPI: PM-Timer IO Port: 0x4008 [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled) [ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 2, version 17, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 14 global_irq 14 dfl dfl) [ 0.000000] Enabling APIC mode: Flat. Using 1 I/O APICs [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] SMP: Allowing 2 CPUs, 0 hotplug CPUs [ 0.000000] Allocating PCI resources starting at 50000000 (gap: 40000000:bec00000) [ 0.000000] NR_CPUS:32 nr_cpumask_bits:32 nr_cpu_ids:2 nr_node_ids:1 [ 0.000000] PERCPU: Allocating 36864 bytes of per cpu data [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 259984 [ 0.000000] Kernel command line: BOOT_IMAGE=lxser ro root=801 console=tty0 console=ttyS0,38400 panic=10 noacpi [ 0.000000] Enabling fast FPU save and restore... done. [ 0.000000] Enabling unmasked SIMD FPU exception support... done. [ 0.000000] Initializing CPU#0 [ 0.000000] PID hash table entries: 4096 (order: 12, 16384 bytes) [ 0.000000] Fast TSC calibration using PIT [ 0.000000] Detected 999.955 MHz processor. [ 0.010000] Console: colour VGA+ 80x25 [ 0.010000] console [tty0] enabled [ 0.010000] console [ttyS0] enabled [ 0.010000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) [ 0.010000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) [ 0.010000] Memory: 1033128k/1048512k available (3142k kernel code, 14644k reserved, 1508k data, 292k init, 137160k highmem) [ 0.010000] virtual kernel memory layout: [ 0.010000] fixmap : 0xffe19000 - 0xfffff000 (1944 kB) [ 0.010000] pkmap : 0xffa00000 - 0xffc00000 (2048 kB) [ 0.010000] vmalloc : 0xf81fe000 - 0xff9fe000 ( 120 MB) [ 0.010000] lowmem : 0xc0000000 - 0xf79fe000 ( 889 MB) [ 0.010000] .init : 0xc0592000 - 0xc05db000 ( 292 kB) [ 0.010000] .data : 0xc04119bd - 0xc058ac00 (1508 kB) [ 0.010000] .text : 0xc0100000 - 0xc04119bd (3142 kB) [ 0.010000] Checking if this processor honours the WP bit even in supervisor mode...Ok. [ 0.010033] Calibrating delay loop (skipped), value calculated using timer frequency.. 1999.91 BogoMIPS (lpj=9999550) [ 0.030176] Mount-cache hash table entries: 512 [ 0.040433] CPU: L1 I cache: 16K, L1 D cache: 16K [ 0.060005] CPU: L2 cache: 256K [ 0.070007] CPU serial number disabled. [ 0.080011] Intel machine check architecture supported. [ 0.090007] Intel machine check reporting enabled on CPU#0. [ 0.100040] Checking 'hlt' instruction... OK. [ 0.152091] ACPI: Core revision 20081204 [ 0.174561] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.282704] CPU0: Intel Pentium III (Coppermine) stepping 06 [ 0.300000] Booting processor 1 APIC 0x1 ip 0x6000 [ 0.010000] Initializing CPU#1 [ 0.010000] Calibrating delay using timer specific routine.. 2000.13 BogoMIPS (lpj=10000696) [ 0.010000] CPU: L1 I cache: 16K, L1 D cache: 16K [ 0.010000] CPU: L2 cache: 256K [ 0.010000] CPU serial number disabled. [ 0.010000] Intel machine check architecture supported. [ 0.010000] Intel machine check reporting enabled on CPU#1. [ 0.460324] CPU1: Intel Pentium III (Coppermine) stepping 06 [ 0.483776] checking TSC synchronization [CPU#0 -> CPU#1]: passed. [ 0.490241] Brought up 2 CPUs [ 0.500005] Total of 2 processors activated (4000.04 BogoMIPS). [ 0.510377] net_namespace: 764 bytes [ 0.520246] NET: Registered protocol family 16 [ 0.530064] ACPI: bus type pci registered [ 0.575538] PCI: PCI BIOS revision 2.10 entry at 0xfb300, last bus=1 [ 0.580011] PCI: Using configuration type 1 for base access [ 0.590064] mtrr: your CPUs had inconsistent variable MTRR settings [ 0.600004] mtrr: probably your BIOS does not setup all CPUs. [ 0.610002] mtrr: corrected configuration. [ 0.620128] bio: create slab <bio-0> at 0 [ 0.649353] ACPI: Interpreter enabled [ 0.650022] ACPI: (supports S0 S1 S5) [ 0.661789] ACPI: Using IOAPIC for interrupt routing [ 0.681559] ACPI: PCI Root Bridge [PCI0] (0000:00) [ 0.700401] pci 0000:00:07.4: quirk: region 5000-500f claimed by vt82c686 SMB [ 0.710215] pci 0000:00:0a.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.720006] pci 0000:00:0a.0: PME# disabled [ 0.730274] pci 0000:00:10.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.740005] pci 0000:00:10.0: PME# disabled [ 0.750438] ACPI Warning (nspredef-0940): \_SB_.PCI0._PRT: Return Package type mismatch at index 3 - found Reference, expected Integer [20081204] [ 0.773512] ACPI Warning (rscreate-0277): (PRT[20].Source) SourceName and SourceIndex are reversed, fixed [20081204] [ 0.793501] ACPI Warning (rscreate-0277): (PRT[21].Source) SourceName and SourceIndex are reversed, fixed [20081204] [ 0.820006] ACPI Warning (rscreate-0277): (PRT[22].Source) SourceName and SourceIndex are reversed, fixed [20081204] [ 0.850006] ACPI Warning (rscreate-0277): (PRT[23].Source) SourceName and SourceIndex are reversed, fixed [20081204] [ 0.902569] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 7 10 *11 12 14 15) [ 0.927127] ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 7 10 11 *12 14 15) [ 0.940356] ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 7 10 11 12 14 *15) [ 0.963363] ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 7 *10 11 12 14 15) [ 0.986284] SCSI subsystem initialized [ 0.990091] usbcore: registered new interface driver usbfs [ 1.000054] usbcore: registered new interface driver hub [ 1.010050] usbcore: registered new device driver usb [ 1.020054] PCI: Using ACPI for IRQ routing [ 1.120018] pnp: PnP ACPI init [ 1.129263] ACPI: bus type pnp registered [ 1.142120] pnp 00:00: mem resource (0xcc000-0xcffff) overlaps 0000:00:0a.0 BAR 6 (0x0-0xfffff), disabling [ 1.171176] pnp 00:00: mem resource (0xd9000-0xdbfff) overlaps 0000:00:0a.0 BAR 6 (0x0-0xfffff), disabling [ 1.200237] pnp 00:00: mem resource (0xf0000-0xfbfff) overlaps 0000:00:0a.0 BAR 6 (0x0-0xfffff), disabling [ 1.229300] pnp 00:00: mem resource (0xfc000-0xfffff) overlaps 0000:00:0a.0 BAR 6 (0x0-0xfffff), disabling [ 1.258366] pnp 00:00: mem resource (0x0-0x9ffff) overlaps 0000:00:0a.0 BAR 6 (0x0-0xfffff), disabling [ 1.286404] pnp 00:00: mem resource (0xcc000-0xcffff) overlaps 0000:00:10.0 BAR 6 (0x0-0xfffff), disabling [ 1.315455] pnp 00:00: mem resource (0xd9000-0xdbfff) overlaps 0000:00:10.0 BAR 6 (0x0-0xfffff), disabling [ 1.344519] pnp 00:00: mem resource (0xf0000-0xfbfff) overlaps 0000:00:10.0 BAR 6 (0x0-0xfffff), disabling [ 1.373585] pnp 00:00: mem resource (0xfc000-0xfffff) overlaps 0000:00:10.0 BAR 6 (0x0-0xfffff), disabling [ 1.402651] pnp 00:00: mem resource (0x0-0x9ffff) overlaps 0000:00:10.0 BAR 6 (0x0-0xfffff), disabling [ 1.435115] pnp: PnP ACPI: found 10 devices [ 1.447736] ACPI: ACPI bus type pnp unregistered [ 1.461687] system 00:00: iomem range 0x3fff0000-0x3fffffff could not be reserved [ 1.484237] system 00:00: iomem range 0xffff0000-0xffffffff has been reserved [ 1.505707] system 00:00: iomem range 0x100000-0x3ffeffff could not be reserved [ 1.527749] system 00:00: iomem range 0xfec00000-0xfec00fff has been reserved [ 1.549200] system 00:00: iomem range 0xfee00000-0xfee00fff has been reserved [ 1.570690] system 00:02: ioport range 0x4d0-0x4d1 has been reserved [ 1.589808] system 00:02: ioport range 0x294-0x297 has been reserved [ 1.644906] pci 0000:00:01.0: PCI bridge, secondary bus 0000:01 [ 1.662734] pci 0000:00:01.0: IO window: disabled [ 1.677444] pci 0000:00:01.0: MEM window: disabled [ 1.692391] pci 0000:00:01.0: PREFETCH window: disabled [ 1.708829] NET: Registered protocol family 2 [ 1.830187] IP route cache hash table entries: 32768 (order: 5, 131072 bytes) [ 1.852218] TCP established hash table entries: 131072 (order: 8, 1048576 bytes) [ 1.880582] TCP bind hash table entries: 65536 (order: 7, 524288 bytes) [ 1.903612] TCP: Hash tables configured (established 131072 bind 65536) [ 1.923554] TCP reno registered [ 1.960338] NET: Registered protocol family 1 [ 1.974008] Machine check exception polling timer started. [ 1.992060] highmem bounce pool size: 64 pages [ 2.005777] VFS: Disk quotas dquot_6.5.2 [ 2.017684] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 2.037552] SGI XFS with security attributes, large block/inode numbers, no debug enabled [ 2.062878] SGI XFS Quota Management subsystem [ 2.076303] msgmni has b ---cut Third boot attempt is successfull, this time using "acpi=off": ---cut LILO 22.8 boot: lxser acpi=off Loading lxser............................................... BIOS data check successful [ 0.000000] Linux version 2.6.29.1 (and...@ista) (gcc version 4.3.2 (Debian 4.3.2-1.1) ) #1 SMP Mon Apr 6 10:43:08 CEST 2009 [ 0.000000] KERNEL supported cpus: [ 0.000000] Intel GenuineIntel [ 0.000000] AMD AuthenticAMD [ 0.000000] NSC Geode by NSC [ 0.000000] Cyrix CyrixInstead [ 0.000000] Centaur CentaurHauls [ 0.000000] Transmeta GenuineTMx86 [ 0.000000] Transmeta TransmetaCPU [ 0.000000] UMC UMC UMC UMC [ 0.000000] PAT WC disabled due to known CPU erratum. [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 00000000000a0000 (usable) [ 0.000000] BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 000000003fff0000 (usable) [ 0.000000] BIOS-e820: 000000003fff0000 - 000000003fff3000 (ACPI NVS) [ 0.000000] BIOS-e820: 000000003fff3000 - 0000000040000000 (ACPI data) [ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved) [ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) [ 0.000000] BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved) [ 0.000000] DMI 2.3 present. [ 0.000000] last_pfn = 0x3fff0 max_arch_pfn = 0x1000000 [ 0.000000] 133MB HIGHMEM available. [ 0.000000] 889MB LOWMEM available. [ 0.000000] mapped low ram: 0 - 379fe000 [ 0.000000] low ram: 00000000 - 379fe000 [ 0.000000] bootmap 00008000 - 0000ef40 [ 0.000000] (8 early reservations) ==> bootmem [0000000000 - 00379fe000] [ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000] [ 0.000000] #1 [0000001000 - 0000002000] EX TRAMPOLINE ==> [0000001000 - 0000002000] [ 0.000000] #2 [0000006000 - 0000007000] TRAMPOLINE ==> [0000006000 - 0000007000] [ 0.000000] #3 [0000100000 - 000064eb14] TEXT DATA BSS ==> [0000100000 - 000064eb14] [ 0.000000] #4 [000064f000 - 0000657000] INIT_PG_TABLE ==> [000064f000 - 0000657000] [ 0.000000] #5 [000009f000 - 0000100000] BIOS reserved ==> [000009f000 - 0000100000] [ 0.000000] #6 [0000007000 - 0000008000] PGTABLE ==> [0000007000 - 0000008000] [ 0.000000] #7 [0000008000 - 000000f000] BOOTMAP ==> [0000008000 - 000000f000] [ 0.000000] found SMP MP-table at [c00f4ff0] 000f4ff0 [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0x00000000 -> 0x00001000 [ 0.000000] Normal 0x00001000 -> 0x000379fe [ 0.000000] HighMem 0x000379fe -> 0x0003fff0 [ 0.000000] Movable zone start PFN for each node [ 0.000000] early_node_map[2] active PFN ranges [ 0.000000] 0: 0x00000000 -> 0x000000a0 [ 0.000000] 0: 0x00000100 -> 0x0003fff0 [ 0.000000] Intel MultiProcessor Specification v1.4 [ 0.000000] Virtual Wire compatibility mode. [ 0.000000] MPTABLE: OEM ID: OEM00000 [ 0.000000] MPTABLE: Product ID: PROD00000000 [ 0.000000] MPTABLE: APIC at: 0xFEE00000 [ 0.000000] Processor #0 (Bootup-CPU) [ 0.000000] Processor #1 [ 0.000000] I/O APIC #2 Version 17 at 0xFEC00000. [ 0.000000] Enabling APIC mode: Flat. Using 1 I/O APICs [ 0.000000] Processors: 2 [ 0.000000] SMP: Allowing 2 CPUs, 0 hotplug CPUs [ 0.000000] Allocating PCI resources starting at 50000000 (gap: 40000000:bec00000) [ 0.000000] NR_CPUS:32 nr_cpumask_bits:32 nr_cpu_ids:2 nr_node_ids:1 [ 0.000000] PERCPU: Allocating 36864 bytes of per cpu data [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 259984 [ 0.000000] Kernel command line: BOOT_IMAGE=lxser ro root=801 console=tty0 console=ttyS0,38400 panic=10 acpi=off [ 0.000000] Enabling fast FPU save and restore... done. [ 0.000000] Enabling unmasked SIMD FPU exception support... done. [ 0.000000] Initializing CPU#0 [ 0.000000] PID hash table entries: 4096 (order: 12, 16384 bytes) [ 0.000000] Fast TSC calibration using PIT [ 0.000000] Detected 1000.006 MHz processor. [ 0.010000] Console: colour VGA+ 80x25 [ 0.010000] console [tty0] enabled [ 0.010000] console [ttyS0] enabled [ 0.010000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) [ 0.010000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) [ 0.010000] Memory: 1033128k/1048512k available (3142k kernel code, 14644k reserved, 1508k data, 292k init, 137160k highmem) [ 0.010000] virtual kernel memory layout: [ 0.010000] fixmap : 0xffe19000 - 0xfffff000 (1944 kB) [ 0.010000] pkmap : 0xffa00000 - 0xffc00000 (2048 kB) [ 0.010000] vmalloc : 0xf81fe000 - 0xff9fe000 ( 120 MB) [ 0.010000] lowmem : 0xc0000000 - 0xf79fe000 ( 889 MB) [ 0.010000] .init : 0xc0592000 - 0xc05db000 ( 292 kB) [ 0.010000] .data : 0xc04119bd - 0xc058ac00 (1508 kB) [ 0.010000] .text : 0xc0100000 - 0xc04119bd (3142 kB) [ 0.010000] Checking if this processor honours the WP bit even in supervisor mode...Ok. [ 0.010032] Calibrating delay loop (skipped), value calculated using timer frequency.. 2000.01 BogoMIPS (lpj=10000060) [ 0.030175] Mount-cache hash table entries: 512 [ 0.040436] CPU: L1 I cache: 16K, L1 D cache: 16K [ 0.060005] CPU: L2 cache: 256K [ 0.070007] CPU serial number disabled. [ 0.080011] Intel machine check architecture supported. [ 0.090007] Intel machine check reporting enabled on CPU#0. [ 0.100042] Checking 'hlt' instruction... OK. [ 0.152516] ExtINT not setup in hardware but reported by MP table [ 0.161124] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=0 pin2=0 [ 0.279561] CPU0: Intel Pentium III (Coppermine) stepping 06 [ 0.410556] Booting processor 1 APIC 0x1 ip 0x6000 [ 0.010000] Initializing CPU#1 [ 0.010000] Calibrating delay using timer specific routine.. 2000.13 BogoMIPS (lpj=10000685) [ 0.010000] CPU: L1 I cache: 16K, L1 D cache: 16K [ 0.010000] CPU: L2 cache: 256K [ 0.010000] CPU serial number disabled. [ 0.010000] Intel machine check architecture supported. [ 0.010000] Intel machine check reporting enabled on CPU#1. [ 0.580346] CPU1: Intel Pentium III (Coppermine) stepping 06 [ 0.603769] checking TSC synchronization [CPU#0 -> CPU#1]: passed. [ 0.610238] Brought up 2 CPUs [ 0.620005] Total of 2 processors activated (4000.14 BogoMIPS). [ 0.630380] net_namespace: 764 bytes [ 0.640242] NET: Registered protocol family 16 [ 0.683466] PCI: PCI BIOS revision 2.10 entry at 0xfb300, last bus=1 [ 0.690004] PCI: Using configuration type 1 for base access [ 0.700073] mtrr: your CPUs had inconsistent variable MTRR settings [ 0.710004] mtrr: probably your BIOS does not setup all CPUs. [ 0.720002] mtrr: corrected configuration. [ 0.740189] bio: create slab <bio-0> at 0 [ 0.750181] ACPI: Interpreter disabled. [ 0.760286] SCSI subsystem initialized [ 0.770119] usbcore: registered new interface driver usbfs [ 0.780060] usbcore: registered new interface driver hub [ 0.790324] usbcore: registered new device driver usb [ 0.800065] PCI: Probing PCI hardware [ 0.810400] pci 0000:00:07.4: quirk: region 5000-500f claimed by vt82c686 SMB [ 0.820229] pci 0000:00:0a.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.830013] pci 0000:00:0a.0: PME# disabled [ 0.840273] pci 0000:00:10.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.850005] pci 0000:00:10.0: PME# disabled [ 0.860563] pci 0000:00:07.0: VIA IRQ router [1106:0686] [ 0.870036] pci 0000:00:07.2: PCI->APIC IRQ transform: INT D -> IRQ 10 [ 0.880020] pci 0000:00:07.3: PCI->APIC IRQ transform: INT D -> IRQ 10 [ 0.890009] pci 0000:00:09.0: PCI->APIC IRQ transform: INT A -> IRQ 11 [ 0.900007] pci 0000:00:0a.0: PCI->APIC IRQ transform: INT A -> IRQ 12 [ 0.910007] pci 0000:00:0b.0: PCI->APIC IRQ transform: INT A -> IRQ 15 [ 0.920007] pci 0000:00:0d.0: PCI->APIC IRQ transform: INT A -> IRQ 11 [ 0.930007] pci 0000:00:10.0: PCI->APIC IRQ transform: INT A -> IRQ 10 [ 0.980144] pnp: PnP ACPI: disabled [ 0.991361] pci 0000:00:01.0: PCI bridge, secondary bus 0000:01 [ 1.009204] pci 0000:00:01.0: IO window: disabled [ 1.023905] pci 0000:00:01.0: MEM window: disabled [ 1.038854] pci 0000:00:01.0: PREFETCH window: disabled [ 1.055277] NET: Registered protocol family 2 [ 1.169454] IP route cache hash table entries: 32768 (order: 5, 131072 bytes) [ 1.191471] TCP established hash table entries: 131072 (order: 8, 1048576 bytes) [ 1.219847] TCP bind hash table entries: 65536 (order: 7, 524288 bytes) [ 1.242883] TCP: Hash tables configured (established 131072 bind 65536) [ 1.262826] TCP reno registered [ 1.299613] NET: Registered protocol family 1 [ 1.313381] platform rtc_cmos: registered platform RTC device (no PNP device found) [ 1.336479] Machine check exception polling timer started. [ 1.354462] highmem bounce pool size: 64 pages [ 1.368201] VFS: Disk quotas dquot_6.5.2 [ 1.380098] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 1.399950] SGI XFS with security attributes, large block/inode numbers, no debug enabled [ 1.425257] SGI XFS Quota Management subsystem [ 1.438680] msgmni has been set to 1750 [ 1.450487] alg: No test for stdrng (krng) [ 1.462895] io scheduler noop registered [ 1.474734] io scheduler anticipatory registered [ 1.488641] io scheduler deadline registered [ 1.501574] io scheduler cfq registered (default) [ 1.515775] PCI: VIA PCI bridge detected. Disabling DAC. [ 1.531777] pci 0000:00:07.0: Enabling VIA external APIC routing [ 1.549971] pci 0000:00:0a.0: Firmware left e100 interrupts enabled; disabling [ 1.571817] pci 0000:00:10.0: Firmware left e100 interrupts enabled; disabling [ 1.721007] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled [ 1.740610] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 1.761234] HP CISS Driver (v 3.6.20) [ 1.772426] Uniform Multi-Platform E-IDE driver [ 1.786468] ide-gd driver 1.18 [ 1.795990] Loading Adaptec I2O RAID: Version 2.4 Build 5go [ 1.812768] Detecting Adaptec I2O RAID controllers... [ 1.828239] Adaptec aacraid driver 1.1-5[2456]-ms [ 1.842561] megasas: 00.00.04.01 Thu July 24 11:41:51 PST 2008 [ 1.848247] Clocksource tsc unstable (delta = 188897306 ns) [ 1.876971] GDT-HA: Storage RAID Controller Driver. Version: 3.05 [ 1.886960] 3ware Storage Controller device driver for Linux v1.26.02.002. [ 3.636915] scsi0 : 3ware Storage Controller [ 3.647296] 3w-xxxx: scsi0: Found a 3ware Storage Controller at 0xe800, IRQ: 11. [ 3.657113] scsi 0:0:0:0: Direct-Access 3ware Logical Disk 0 1.2 PQ: 0 ANSI: 0 [ 3.687105] 3ware 9000 Storage Controller device driver for Linux v2.26.02.011. [ 3.696993] Driver 'sd' needs updating - please use bus_type methods [ 3.707036] sd 0:0:0:0: [sda] 80416192 512-byte hardware sectors: (41.1 GB/38.3 GiB) [ 3.726943] sd 0:0:0:0: [sda] Write Protect is off [ 3.746942] sd 0:0:0:0: [sda] Write cache: enabled, read cache: disabled, supports DPO and FUA [ 3.757020] sd 0:0:0:0: [sda] 80416192 512-byte hardware sectors: (41.1 GB/38.3 GiB) [ 3.776929] sd 0:0:0:0: [sda] Write Protect is off [ 3.786934] sd 0:0:0:0: [sda] Write cache: enabled, read cache: disabled, supports DPO and FUA [ 3.796908] sda: sda1 sda2 sda3 sda4 < sda5 sda6 sda7 > [ 3.839949] sd 0:0:0:0: [sda] Attached SCSI disk [ 3.856998] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 3.876961] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 3.896977] uhci_hcd: USB Universal Host Controller Interface driver [ 3.907034] uhci_hcd 0000:00:07.2: UHCI Host Controller [ 3.926965] uhci_hcd 0000:00:07.2: new USB bus registered, assigned bus number 1 [ 3.946957] uhci_hcd 0000:00:07.2: irq 10, io base 0x0000c400 [ 3.967008] usb usb1: New USB device found, idVendor=1d6b, idProduct=0001 [ 3.986900] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 4.006899] usb usb1: Product: UHCI Host Controller [ 4.026898] usb usb1: Manufacturer: Linux 2.6.29.1 uhci_hcd [ 4.036898] usb usb1: SerialNumber: 0000:00:07.2 [ 4.057309] usb usb1: configuration #1 chosen from 1 choice [ 4.076976] hub 1-0:1.0: USB hub found [ 4.086923] hub 1-0:1.0: 2 ports detected [ 4.097140] uhci_hcd 0000:00:07.3: UHCI Host Controller [ 4.116952] uhci_hcd 0000:00:07.3: new USB bus registered, assigned bus number 2 [ 4.136924] uhci_hcd 0000:00:07.3: irq 10, io base 0x0000c800 [ 4.156990] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001 [ 4.176907] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 4.196905] usb usb2: Product: UHCI Host Controller [ 4.206899] usb usb2: Manufacturer: Linux 2.6.29.1 uhci_hcd [ 4.226898] usb usb2: SerialNumber: 0000:00:07.3 [ 4.237232] usb usb2: configuration #1 chosen from 1 choice [ 4.256978] hub 2-0:1.0: USB hub found [ 4.266923] hub 2-0:1.0: 2 ports detected [ 4.286906] PNP: No PS/2 controller found. Probing ports directly. [ 4.547011] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 4.567214] mice: PS/2 mouse device common for all mice [ 4.587142] rtc_cmos rtc_cmos: rtc core: registered rtc_cmos as rtc0 [ 4.596977] rtc0: alarms up to one day, 114 bytes nvram [ 4.616942] md: raid1 personality registered for level 1 [ 4.636905] EDAC MC: Ver: 2.1.0 Apr 6 2009 [ 4.646980] cpuidle: using governor ladder [ 4.656901] cpuidle: using governor menu [ 4.657201] input: AT Translated Set 2 keyboard as /class/input/input0 [ 4.696999] usbcore: registered new interface driver usbhid [ 4.706906] usbhid: v2.6:USB HID core driver [ 4.727147] TCP cubic registered [ 4.736902] NET: Registered protocol family 17 [ 4.746936] Using IPI No-Shortcut mode [ 4.757221] rtc_cmos rtc_cmos: setting system clock to 2009-04-06 09:00:07 UTC (1239008407) [ 4.896933] md: Waiting for all devices to be available before autodetect [ 4.916900] md: If you don't use raid, use raid=noautodetect [ 4.937035] md: Autodetecting RAID arrays. [ 4.946900] md: Scanned 0 and added 0 devices. [ 4.966898] md: autorun ... [ 4.976897] md: ... autorun DONE. [ 4.987350] VFS: Mounted root (ext2 filesystem) readonly on device 8:1. [ 4.997486] Freeing unused kernel memory: 292k freed INIT: version 2.86 booting [...] ---cut The fourth boot attempt (using acpi=noirq) is also unsuccessful, the box also stalls: ---cut LILO 22.8 boot: lxser acpi=noirq Loading lxser............................................... BIOS data check successful [ 0.000000] Linux version 2.6.29.1 (and...@ista) (gcc version 4.3.2 (Debian 4.3.2-1.1) ) #1 SMP Mon Apr 6 10:43:08 CEST 2009 [ 0.000000] KERNEL supported cpus: [ 0.000000] Intel GenuineIntel [ 0.000000] AMD AuthenticAMD [ 0.000000] NSC Geode by NSC [ 0.000000] Cyrix CyrixInstead [ 0.000000] Centaur CentaurHauls [ 0.000000] Transmeta GenuineTMx86 [ 0.000000] Transmeta TransmetaCPU [ 0.000000] UMC UMC UMC UMC [ 0.000000] PAT WC disabled due to known CPU erratum. [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 00000000000a0000 (usable) [ 0.000000] BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 000000003fff0000 (usable) [ 0.000000] BIOS-e820: 000000003fff0000 - 000000003fff3000 (ACPI NVS) [ 0.000000] BIOS-e820: 000000003fff3000 - 0000000040000000 (ACPI data) [ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved) [ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) [ 0.000000] BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved) [ 0.000000] DMI 2.3 present. [ 0.000000] last_pfn = 0x3fff0 max_arch_pfn = 0x1000000 [ 0.000000] ACPI: RSDP 000F68C0, 0014 (r0 VIA694) [ 0.000000] ACPI: RSDT 3FFF3000, 002C (r1 VIA694 AWRDACPI 42302E31 AWRD 0) [ 0.000000] ACPI: FACP 3FFF3040, 0074 (r1 VIA694 AWRDACPI 42302E31 AWRD 0) [ 0.000000] FADT: X_PM1a_EVT_BLK.bit_width (16) does not match PM1_EVT_LEN (4) [ 0.000000] ACPI: DSDT 3FFF30C0, 2A01 (r1 VIA694 AWRDACPI 1000 MSFT 100000C) [ 0.000000] ACPI: FACS 3FFF0000, 0040 [ 0.000000] ACPI: APIC 3FFF5B00, 005C (r1 VIA694 33303033 0) [ 0.000000] 133MB HIGHMEM available. [ 0.000000] 889MB LOWMEM available. [ 0.000000] mapped low ram: 0 - 379fe000 [ 0.000000] low ram: 00000000 - 379fe000 [ 0.000000] bootmap 00008000 - 0000ef40 [ 0.000000] (8 early reservations) ==> bootmem [0000000000 - 00379fe000] [ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000] [ 0.000000] #1 [0000001000 - 0000002000] EX TRAMPOLINE ==> [0000001000 - 0000002000] [ 0.000000] #2 [0000006000 - 0000007000] TRAMPOLINE ==> [0000006000 - 0000007000] [ 0.000000] #3 [0000100000 - 000064eb14] TEXT DATA BSS ==> [0000100000 - 000064eb14] [ 0.000000] #4 [000064f000 - 0000657000] INIT_PG_TABLE ==> [000064f000 - 0000657000] [ 0.000000] #5 [000009f000 - 0000100000] BIOS reserved ==> [000009f000 - 0000100000] [ 0.000000] #6 [0000007000 - 0000008000] PGTABLE ==> [0000007000 - 0000008000] [ 0.000000] #7 [0000008000 - 000000f000] BOOTMAP ==> [0000008000 - 000000f000] [ 0.000000] found SMP MP-table at [c00f4ff0] 000f4ff0 [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0x00000000 -> 0x00001000 [ 0.000000] Normal 0x00001000 -> 0x000379fe [ 0.000000] HighMem 0x000379fe -> 0x0003fff0 [ 0.000000] Movable zone start PFN for each node [ 0.000000] early_node_map[2] active PFN ranges [ 0.000000] 0: 0x00000000 -> 0x000000a0 [ 0.000000] 0: 0x00000100 -> 0x0003fff0 [ 0.000000] ACPI: PM-Timer IO Port: 0x4008 [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled) [ 0.000000] Using ACPI for processor (LAPIC) configuration information [ 0.000000] Intel MultiProcessor Specification v1.4 [ 0.000000] Virtual Wire compatibility mode. [ 0.000000] MPTABLE: OEM ID: OEM00000 [ 0.000000] MPTABLE: Product ID: PROD00000000 [ 0.000000] MPTABLE: APIC at: 0xFEE00000 [ 0.000000] I/O APIC #2 Version 17 at 0xFEC00000. [ 0.000000] Enabling APIC mode: Flat. Using 1 I/O APICs [ 0.000000] Processors: 2 [ 0.000000] SMP: Allowing 2 CPUs, 0 hotplug CPUs [ 0.000000] Allocating PCI resources starting at 50000000 (gap: 40000000:bec00000) [ 0.000000] NR_CPUS:32 nr_cpumask_bits:32 nr_cpu_ids:2 nr_node_ids:1 [ 0.000000] PERCPU: Allocating 36864 bytes of per cpu data [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 259984 [ 0.000000] Kernel command line: auto BOOT_IMAGE=lxser ro root=801 console=tty0 console=ttyS0,38400 panic=10 acpi=noirq [ 0.000000] Enabling fast FPU save and restore... done. [ 0.000000] Enabling unmasked SIMD FPU exception support... done. [ 0.000000] Initializing CPU#0 [ 0.000000] PID hash table entries: 4096 (order: 12, 16384 bytes) [ 0.000000] Fast TSC calibration using PIT [ 0.000000] Detected 999.853 MHz processor. [ 0.010000] Console: colour VGA+ 80x25 [ 0.010000] console [tty0] enabled [ 0.010000] console [ttyS0] enabled [ 0.010000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) [ 0.010000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) [ 0.010000] Memory: 1033128k/1048512k available (3142k kernel code, 14644k reserved, 1508k data, 292k init, 137160k highmem) [ 0.010000] virtual kernel memory layout: [ 0.010000] fixmap : 0xffe19000 - 0xfffff000 (1944 kB) [ 0.010000] pkmap : 0xffa00000 - 0xffc00000 (2048 kB) [ 0.010000] vmalloc : 0xf81fe000 - 0xff9fe000 ( 120 MB) [ 0.010000] lowmem : 0xc0000000 - 0xf79fe000 ( 889 MB) [ 0.010000] .init : 0xc0592000 - 0xc05db000 ( 292 kB) [ 0.010000] .data : 0xc04119bd - 0xc058ac00 (1508 kB) [ 0.010000] .text : 0xc0100000 - 0xc04119bd (3142 kB) [ 0.010000] Checking if this processor honours the WP bit even in supervisor mode...Ok. [ 0.010033] Calibrating delay loop (skipped), value calculated using timer frequency.. 1999.70 BogoMIPS (lpj=9998530) [ 0.030179] Mount-cache hash table entries: 512 [ 0.040437] CPU: L1 I cache: 16K, L1 D cache: 16K [ 0.060005] CPU: L2 cache: 256K [ 0.070007] CPU serial number disabled. [ 0.080010] Intel machine check architecture supported. [ 0.090007] Intel machine check reporting enabled on CPU#0. [ 0.100042] Checking 'hlt' instruction... OK. [ 0.152094] ACPI: Core revision 20081204 [ 0.173501] ExtINT not setup in hardware but reported by MP table [ 0.181115] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=0 pin2=0 [ 0.290562] CPU0: Intel Pentium III (Coppermine) stepping 06 [ 0.310000] Booting processor 1 APIC 0x1 ip 0x6000 [ 0.010000] Initializing CPU#1 [ 0.010000] Calibrating delay using timer specific routine.. 2000.13 BogoMIPS (lpj=10000692) [ 0.010000] CPU: L1 I cache: 16K, L1 D cache: 16K [ 0.010000] CPU: L2 cache: 256K [ 0.010000] CPU serial number disabled. [ 0.010000] Intel machine check architecture supported. [ 0.010000] Intel machine check reporting enabled on CPU#1. [ 0.470317] CPU1: Intel Pentium III (Coppermine) stepping 06 [ 0.493773] checking TSC synchronization [CPU#0 -> CPU#1]: passed. [ 0.500239 ---cut -- Configure bugmail: http://bugzilla.kernel.org/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug. ------------------------------------------------------------------------------ _______________________________________________ acpi-bugzilla mailing list acpi-bugzilla@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/acpi-bugzilla
