http://bugzilla.kernel.org/show_bug.cgi?id=13268
--- Comment #8 from Christopher Horler <[email protected]> 2009-05-08 16:25:35 --- (In reply to comment #5) > the problem happens in every kernel release that you have tried, right? yes - for as long as I can remember (I can remember as far back as SuSE 10.1, but can't remember what kernel that was running - it probable it was happening before that too). > please run "echo disable > /sys/firmware/acpi/interrupts/gpe00" before the > interrupt storm and see if it helps. I tried this and I think it helped - at least I tried to provoke the problem and it didn't appear in about 45 mins of trying. Thanks! What practical impact does disabling a gpe00 have? (other than solving my problem). -- Configure bugmail: http://bugzilla.kernel.org/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug. ------------------------------------------------------------------------------ The NEW KODAK i700 Series Scanners deliver under ANY circumstances! Your production scanning environment may not be a perfect world - but thanks to Kodak, there's a perfect scanner to get the job done! With the NEW KODAK i700 Series Scanner you'll get full speed at 300 dpi even with all image processing features enabled. http://p.sf.net/sfu/kodak-com _______________________________________________ acpi-bugzilla mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/acpi-bugzilla
