http://bugzilla.kernel.org/show_bug.cgi?id=12873
--- Comment #45 from Kenney Phillis Jr. <kphilli...@gmail.com> 2009-05-09 17:13:39 --- Created an attachment (id=21287) --> (http://bugzilla.kernel.org/attachment.cgi?id=21287) 2.6.30-rc5 dmesg log Another dmesg output, however, this time i booted with these flags: acpi.debug_layer=0x000000f acpi.debug_level=0x000000ff At around 300 seconds, i removed the ac adaptor for a little bit, and found a neat set of messages. It appears that "ACAD", "BAT1" and "EHC0" all send events on the GP03 (Although, this also on my patched version which reverts the code in the function, acpi_bus_get_wakeup_device_flags back to what is seen in kernel revisions 2.6.25 and 2.6.24 -- Configure bugmail: http://bugzilla.kernel.org/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug. ------------------------------------------------------------------------------ The NEW KODAK i700 Series Scanners deliver under ANY circumstances! Your production scanning environment may not be a perfect world - but thanks to Kodak, there's a perfect scanner to get the job done! With the NEW KODAK i700 Series Scanner you'll get full speed at 300 dpi even with all image processing features enabled. http://p.sf.net/sfu/kodak-com _______________________________________________ acpi-bugzilla mailing list acpi-bugzilla@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/acpi-bugzilla
