http://bugzilla.kernel.org/show_bug.cgi?id=15548
--- Comment #3 from Sergey Senozhatsky <[email protected]> 2010-03-18 12:39:36 --- On (03/18/10 07:15), [email protected] wrote: > --- Comment #1 from Zhang Rui <[email protected]> 2010-03-18 07:14:51 --- > so the problem doesn't exist if > boot with boot option "thermal.off=1" if the thermal driver is built in, ... > right? > Correct. thermal.off=1 dmesg: [ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Linux version 2.6.34-rc1-dbg-git6-r8169 (gcc version 4.4.3 (GCC) ) #47 SMP PREEMPT Tue Mar 16 21:35:08 EET 2010 [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009fc00 (usable) [ 0.000000] BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved) [ 0.000000] BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 000000007ffa8000 (usable) [ 0.000000] BIOS-e820: 000000007ffa8000 - 000000007ffb0000 (ACPI NVS) [ 0.000000] BIOS-e820: 000000007ffb0000 - 000000007ffbe000 (ACPI data) [ 0.000000] BIOS-e820: 000000007ffbe000 - 0000000080000000 (ACPI NVS) [ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) [ 0.000000] BIOS-e820: 00000000ffb80000 - 0000000100000000 (reserved) [ 0.000000] Notice: NX (Execute Disable) protection cannot be enabled: non-PAE kernel! [ 0.000000] DMI 2.4 present. [ 0.000000] AMI BIOS detected: BIOS may corrupt low RAM, working around it. [ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved) [ 0.000000] e820 update range: 0000000000000000 - 0000000000001000 (usable) ==> (reserved) [ 0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable) [ 0.000000] last_pfn = 0x7ffa8 max_arch_pfn = 0x100000 [ 0.000000] MTRR default type: uncachable [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-BFFFF uncachable [ 0.000000] C0000-CFFFF write-protect [ 0.000000] D0000-DFFFF uncachable [ 0.000000] E0000-EFFFF write-through [ 0.000000] F0000-FFFFF write-protect [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 000000000 mask F80000000 write-back [ 0.000000] 1 disabled [ 0.000000] 2 disabled [ 0.000000] 3 disabled [ 0.000000] 4 disabled [ 0.000000] 5 disabled [ 0.000000] 6 disabled [ 0.000000] 7 disabled [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 [ 0.000000] Scanning 0 areas for low memory corruption [ 0.000000] modified physical RAM map: [ 0.000000] modified: 0000000000000000 - 0000000000010000 (reserved) [ 0.000000] modified: 0000000000010000 - 000000000009fc00 (usable) [ 0.000000] modified: 000000000009fc00 - 00000000000a0000 (reserved) [ 0.000000] modified: 00000000000e0000 - 0000000000100000 (reserved) [ 0.000000] modified: 0000000000100000 - 000000007ffa8000 (usable) [ 0.000000] modified: 000000007ffa8000 - 000000007ffb0000 (ACPI NVS) [ 0.000000] modified: 000000007ffb0000 - 000000007ffbe000 (ACPI data) [ 0.000000] modified: 000000007ffbe000 - 0000000080000000 (ACPI NVS) [ 0.000000] modified: 00000000fee00000 - 00000000fee01000 (reserved) [ 0.000000] modified: 00000000ffb80000 - 0000000100000000 (reserved) [ 0.000000] initial memory mapped : 0 - 02000000 [ 0.000000] found SMP MP-table at [c00ff780] ff780 [ 0.000000] init_memory_mapping: 0000000000000000-00000000377fe000 [ 0.000000] 0000000000 - 0000400000 page 4k [ 0.000000] 0000400000 - 0037400000 page 2M [ 0.000000] 0037400000 - 00377fe000 page 4k [ 0.000000] kernel direct mapping tables up to 377fe000 @ 15000-1a000 [ 0.000000] RAMDISK: 37e4e000 - 37fef001 [ 0.000000] Allocated new RAMDISK: 00100000 - 002a1001 [ 0.000000] Move RAMDISK from 0000000037e4e000 - 0000000037fef000 to 00100000 - 002a1000 [ 0.000000] ACPI: RSDP 000f7af0 00014 (v00 ACPIAM) [ 0.000000] ACPI: RSDT 7ffb0000 00040 (v01 _ASUS_ Notebook 06000811 MSFT 00000097) [ 0.000000] ACPI: FACP 7ffb0200 00084 (v02 AMI OEMFACP 06000811 MSFT 00000097) [ 0.000000] ACPI: DSDT 7ffb05e0 08B86 (v01 F3J00 F3J00001 00000001 INTL 02002026) [ 0.000000] ACPI: FACS 7ffbe000 00040 [ 0.000000] ACPI: APIC 7ffb0390 0005C (v01 AMI OEMAPIC 06000811 MSFT 00000097) [ 0.000000] ACPI: MCFG 7ffb03f0 0003C (v01 AMI OEMMCFG 06000811 MSFT 00000097) [ 0.000000] ACPI: BOOT 7ffb05b0 00028 (v01 AMI OEMBOOT 06000811 MSFT 00000097) [ 0.000000] ACPI: SLIC 7ffb0430 00176 (v01 _ASUS_ Notebook 06000811 MSFT 00000097) [ 0.000000] ACPI: OEMB 7ffbe040 00046 (v01 AMI AMI_OEM 06000811 MSFT 00000097) [ 0.000000] ACPI: HPET 7ffb9170 00038 (v01 AMI ASUS 06000811 MSFT 00000097) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] 1159MB HIGHMEM available. [ 0.000000] 887MB LOWMEM available. [ 0.000000] mapped low ram: 0 - 377fe000 [ 0.000000] low ram: 0 - 377fe000 [ 0.000000] node 0 low ram: 00000000 - 377fe000 [ 0.000000] node 0 bootmap 00016000 - 0001cf00 [ 0.000000] (13/32 early reservations) ==> bootmem [0000000000 - 00377fe000] [ 0.000000] #0 [0000001000 - 0000002000] EX TRAMPOLINE ==> [0000001000 - 0000002000] [ 0.000000] #1 [0001000000 - 0001b8b484] TEXT DATA BSS ==> [0001000000 - 0001b8b484] [ 0.000000] #2 [0001b8c000 - 0001b941cd] BRK ==> [0001b8c000 - 0001b941cd] [ 0.000000] #3 [00000ff790 - 0000100000] BIOS reserved ==> [00000ff790 - 0000100000] [ 0.000000] #4 [00000ff780 - 00000ff790] MP-table mpf ==> [00000ff780 - 00000ff790] [ 0.000000] #5 [000009fc00 - 00000fd0c0] BIOS reserved ==> [000009fc00 - 00000fd0c0] [ 0.000000] #6 [00000fd23c - 00000ff780] BIOS reserved ==> [00000fd23c - 00000ff780] [ 0.000000] #7 [00000fd0c0 - 00000fd23c] MP-table mpc ==> [00000fd0c0 - 00000fd23c] [ 0.000000] #8 [0000010000 - 0000011000] TRAMPOLINE ==> [0000010000 - 0000011000] [ 0.000000] #9 [0000011000 - 0000015000] ACPI WAKEUP ==> [0000011000 - 0000015000] [ 0.000000] #10 [0000015000 - 0000016000] PGTABLE ==> [0000015000 - 0000016000] [ 0.000000] #11 [0000100000 - 00002a1001] NEW RAMDISK ==> [0000100000 - 00002a1001] [ 0.000000] #12 [0000016000 - 000001d000] BOOTMAP ==> [0000016000 - 000001d000] [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0x00000010 -> 0x00001000 [ 0.000000] Normal 0x00001000 -> 0x000377fe [ 0.000000] HighMem 0x000377fe -> 0x0007ffa8 [ 0.000000] Movable zone start PFN for each node [ 0.000000] early_node_map[2] active PFN ranges [ 0.000000] 0: 0x00000010 -> 0x0000009f [ 0.000000] 0: 0x00000100 -> 0x0007ffa8 [ 0.000000] On node 0 totalpages: 524087 [ 0.000000] free_area_init_node: node 0, pgdat c1476940, node_mem_map c1b96200 [ 0.000000] DMA zone: 32 pages used for memmap [ 0.000000] DMA zone: 0 pages reserved [ 0.000000] DMA zone: 3951 pages, LIFO batch:0 [ 0.000000] Normal zone: 1744 pages used for memmap [ 0.000000] Normal zone: 221486 pages, LIFO batch:31 [ 0.000000] HighMem zone: 2320 pages used for memmap [ 0.000000] HighMem zone: 294554 pages, LIFO batch:31 [ 0.000000] Using APIC driver default [ 0.000000] ACPI: PM-Timer IO Port: 0x808 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled) [ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000 [ 0.000000] SMP: Allowing 2 CPUs, 0 hotplug CPUs [ 0.000000] nr_irqs_gsi: 24 [ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000 [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000 [ 0.000000] PM: Registered nosave memory: 00000000000e0000 - 0000000000100000 [ 0.000000] Allocating PCI resources starting at 80000000 (gap: 80000000:7ee00000) [ 0.000000] setup_percpu: NR_CPUS:2 nr_cpumask_bits:2 nr_cpu_ids:2 nr_node_ids:1 [ 0.000000] PERCPU: Embedded 333 pages/cpu @c2c00000 s1340180 r0 d23788 u2097152 [ 0.000000] pcpu-alloc: s1340180 r0 d23788 u2097152 alloc=1*4194304 [ 0.000000] pcpu-alloc: [0] 0 1 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 519991 [ 0.000000] Kernel command line: root=/dev/sda5 rootfstype=ext4 ro thermal.off=1 [ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes) [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) [ 0.000000] Enabling fast FPU save and restore... done. [ 0.000000] Enabling unmasked SIMD FPU exception support... done. [ 0.000000] Initializing CPU#0 [ 0.000000] Initializing HighMem for node 0 (000377fe:0007ffa8) [ 0.000000] Memory: 2062808k/2096800k available (2849k kernel code, 33540k reserved, 1740k data, 1640k init, 1187496k highmem) [ 0.000000] virtual kernel memory layout: [ 0.000000] fixmap : 0xfff91000 - 0xfffff000 ( 440 kB) [ 0.000000] pkmap : 0xff800000 - 0xffc00000 (4096 kB) [ 0.000000] vmalloc : 0xf7ffe000 - 0xff7fe000 ( 120 MB) [ 0.000000] lowmem : 0xc0000000 - 0xf77fe000 ( 887 MB) [ 0.000000] .init : 0xc147c000 - 0xc1616000 (1640 kB) [ 0.000000] .data : 0xc12c8547 - 0xc147b928 (1740 kB) [ 0.000000] .text : 0xc1000000 - 0xc12c8547 (2849 kB) [ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok. [ 0.000000] SLUB: Genslabs=13, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1 [ 0.000000] Hierarchical RCU implementation. [ 0.000000] NR_IRQS:320 [ 0.000000] Console: colour VGA+ 80x25 [ 0.000000] console [tty0] enabled [ 0.000000] Lock dependency validator: Copyright (c) 2006 Red Hat, Inc., Ingo Molnar [ 0.000000] ... MAX_LOCKDEP_SUBCLASSES: 8 [ 0.000000] ... MAX_LOCK_DEPTH: 48 [ 0.000000] ... MAX_LOCKDEP_KEYS: 8191 [ 0.000000] ... CLASSHASH_SIZE: 4096 [ 0.000000] ... MAX_LOCKDEP_ENTRIES: 16384 [ 0.000000] ... MAX_LOCKDEP_CHAINS: 32768 [ 0.000000] ... CHAINHASH_SIZE: 16384 [ 0.000000] memory used by lock dependency info: 3823 kB [ 0.000000] per task-struct memory footprint: 1920 bytes [ 0.000000] hpet clockevent registered [ 0.000000] Fast TSC calibration using PIT [ 0.000000] Detected 1597.922 MHz processor. [ 0.003356] Calibrating delay loop (skipped), value calculated using timer frequency.. 3197.00 BogoMIPS (lpj=5326406) [ 0.003625] Security Framework initialized [ 0.003753] Mount-cache hash table entries: 512 [ 0.007330] Initializing cgroup subsys ns [ 0.007414] Initializing cgroup subsys cpuacct [ 0.007508] Initializing cgroup subsys devices [ 0.007590] Initializing cgroup subsys blkio [ 0.007839] CPU: Physical Processor ID: 0 [ 0.007919] CPU: Processor Core ID: 0 [ 0.007999] mce: CPU supports 6 MCE banks [ 0.008084] CPU0: Thermal monitoring handled by SMI [ 0.008091] using mwait in idle threads. [ 0.008177] Performance Events: Core2 events, Intel PMU driver. [ 0.008427] ... version: 2 [ 0.008507] ... bit width: 40 [ 0.008585] ... generic registers: 2 [ 0.008663] ... value mask: 000000ffffffffff [ 0.008744] ... max period: 000000007fffffff [ 0.008824] ... fixed-purpose events: 3 [ 0.008902] ... event mask: 0000000700000003 [ 0.008984] Checking 'hlt' instruction... OK. [ 0.020587] ACPI: Core revision 20100121 [ 0.050273] Enabling APIC mode: Flat. Using 1 I/O APICs [ 0.050893] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.085896] CPU0: Intel(R) Core(TM)2 CPU T5200 @ 1.60GHz stepping 06 [ 0.103394] lockdep: fixing up alternatives. [ 0.103698] Booting Node 0, Processors #1 Ok. [ 0.006666] Initializing CPU#1 [ 0.006666] CPU1: Thermal monitoring handled by SMI [ 0.203433] Brought up 2 CPUs [ 0.203591] Total of 2 processors activated (6394.97 BogoMIPS). [ 0.207208] NET: Registered protocol family 16 [ 0.210163] ACPI: bus type pci registered [ 0.210292] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000) [ 0.210292] PCI: not using MMCONFIG [ 0.210618] PCI: PCI BIOS revision 3.00 entry at 0xf0031, last bus=6 [ 0.210702] PCI: Using configuration type 1 for base access [ 0.227184] bio: create slab <bio-0> at 0 [ 0.255060] ACPI: EC: Look up EC in DSDT [ 0.282076] ACPI: Executed 1 blocks of module-level executable AML code [ 0.307590] ACPI: SSDT 7ffb91b0 00D24 (v01 AMI CPU1PM 00000001 INTL 02002026) [ 0.314113] ACPI Warning: Incorrect checksum in table [SSDT] - 54, should be 97 (20100121/tbutils-314) [ 0.314187] ACPI: SSDT 7ffb9ee0 00D24 (v01 AMI CPU2PM 00000001 INTL 02002026) [ 0.322466] ACPI: Interpreter enabled [ 0.322466] ACPI: (supports S0 S3 S4 S5) [ 0.323550] ACPI: Using IOAPIC for interrupt routing [ 0.323723] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000) [ 0.336797] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in ACPI motherboard resources [ 0.336900] PCI: MMCONFIG for 0000 [bus00-3f] at [mem 0xe0000000-0xe3ffffff] (base 0xe0000000) (size reduced!) [ 0.336999] PCI: Using MMCONFIG for extended config space [ 0.387733] ACPI: EC: GPE = 0x1c, I/O: command/status = 0x66, data = 0x62 [ 0.387863] ACPI Warning: Incorrect checksum in table [SSDT] - 54, should be 97 (20100121/tbutils-314) [ 0.390938] ACPI: No dock devices found. [ 0.391022] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 0.391407] ACPI: PCI Root Bridge [PCI0] (0000:00) [ 0.391707] pci_root PNP0A08:00: host bridge window [io 0x0000-0x0cf7] [ 0.391707] pci_root PNP0A08:00: host bridge window [io 0x0d00-0xffff] [ 0.391707] pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff] [ 0.391707] pci_root PNP0A08:00: host bridge window [mem 0x000d0000-0x000dffff] [ 0.391707] pci_root PNP0A08:00: host bridge window [mem 0x80000000-0xffffffff] [ 0.391707] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold [ 0.391707] pci 0000:00:01.0: PME# disabled [ 0.393495] pci 0000:00:1b.0: reg 10: [mem 0xfebfc000-0xfebfffff 64bit] [ 0.393653] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold [ 0.393664] pci 0000:00:1b.0: PME# disabled [ 0.393910] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold [ 0.393920] pci 0000:00:1c.0: PME# disabled [ 0.394173] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold [ 0.394184] pci 0000:00:1c.1: PME# disabled [ 0.394436] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold [ 0.394446] pci 0000:00:1c.2: PME# disabled [ 0.394613] pci 0000:00:1d.0: reg 20: [io 0xec00-0xec1f] [ 0.394775] pci 0000:00:1d.1: reg 20: [io 0xe880-0xe89f] [ 0.394937] pci 0000:00:1d.2: reg 20: [io 0xe800-0xe81f] [ 0.395099] pci 0000:00:1d.3: reg 20: [io 0xe480-0xe49f] [ 0.395254] pci 0000:00:1d.7: reg 10: [mem 0xfebfbc00-0xfebfbfff] [ 0.395415] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold [ 0.395427] pci 0000:00:1d.7: PME# disabled [ 0.395811] pci 0000:00:1f.0: quirk: [io 0x0800-0x087f] claimed by ICH6 ACPI/GPIO/TCO [ 0.395915] pci 0000:00:1f.0: quirk: [io 0x0480-0x04bf] claimed by ICH6 GPIO [ 0.396012] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 3 PIO at 0250 (mask 000f) [ 0.396253] pci 0000:00:1f.2: reg 10: [io 0x0000-0x0007] [ 0.396271] pci 0000:00:1f.2: reg 14: [io 0x0000-0x0003] [ 0.396290] pci 0000:00:1f.2: reg 18: [io 0x0000-0x0007] [ 0.396308] pci 0000:00:1f.2: reg 1c: [io 0x0000-0x0003] [ 0.396326] pci 0000:00:1f.2: reg 20: [io 0xffa0-0xffaf] [ 0.396418] pci 0000:00:1f.2: PME# supported from D3hot [ 0.396428] pci 0000:00:1f.2: PME# disabled [ 0.396564] pci 0000:00:1f.3: reg 20: [io 0x0400-0x041f] [ 0.396869] pci 0000:01:00.0: reg 10: [mem 0xfd000000-0xfdffffff] [ 0.396902] pci 0000:01:00.0: reg 14: [mem 0xc0000000-0xcfffffff 64bit pref] [ 0.396935] pci 0000:01:00.0: reg 1c: [mem 0xfc000000-0xfcffffff 64bit] [ 0.396967] pci 0000:01:00.0: reg 30: [mem 0xfbfe0000-0xfbffffff pref] [ 0.397091] pci 0000:01:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force' [ 0.397332] pci 0000:00:01.0: PCI bridge to [bus 01-01] [ 0.397413] pci 0000:00:01.0: bridge window [io f000 - 0000] reg reading [ 0.397422] pci 0000:00:01.0: bridge window [mem 0xf9f00000-0xfdffffff] [ 0.397437] pci 0000:00:01.0: bridge window [mem 0xbdf00000-0xddefffff 64bit pref] [ 0.397680] pci 0000:02:00.0: reg 10: [io 0xc800-0xc8ff] [ 0.397738] pci 0000:02:00.0: reg 18: [mem 0xfe0ff000-0xfe0fffff 64bit] [ 0.397796] pci 0000:02:00.0: reg 30: [mem 0xfe0e0000-0xfe0effff pref] [ 0.397924] pci 0000:02:00.0: supports D1 D2 [ 0.397927] pci 0000:02:00.0: PME# supported from D1 D2 D3hot D3cold [ 0.397940] pci 0000:02:00.0: PME# disabled [ 0.397988] pci 0000:02:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force' [ 0.398107] pci 0000:00:1c.0: PCI bridge to [bus 02-02] [ 0.398188] pci 0000:00:1c.0: bridge window [io 0xc000-0xcfff] [ 0.398199] pci 0000:00:1c.0: bridge window [mem 0xfe000000-0xfe0fffff] [ 0.398218] pci 0000:00:1c.0: bridge window [mem 0xfff00000 - 000fffff pref] reg reading [ 0.398548] pci 0000:03:00.0: reg 10: [mem 0xfe1ff000-0xfe1fffff] [ 0.398897] pci 0000:03:00.0: PME# supported from D0 D3hot D3cold [ 0.398915] pci 0000:03:00.0: PME# disabled [ 0.399002] pci 0000:03:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force' [ 0.399176] pci 0000:00:1c.1: PCI bridge to [bus 03-03] [ 0.399258] pci 0000:00:1c.1: bridge window [io f000 - 0000] reg reading [ 0.399269] pci 0000:00:1c.1: bridge window [mem 0xfe100000-0xfe1fffff] [ 0.399287] pci 0000:00:1c.1: bridge window [mem 0xfff00000 - 000fffff pref] reg reading [ 0.399443] pci 0000:00:1c.2: PCI bridge to [bus 04-05] [ 0.399525] pci 0000:00:1c.2: bridge window [io 0xd000-0xdfff] [ 0.399536] pci 0000:00:1c.2: bridge window [mem 0xfe200000-0xfe9fffff] [ 0.399555] pci 0000:00:1c.2: bridge window [mem 0xddf00000-0xdfefffff 64bit pref] [ 0.399709] pci 0000:06:01.0: proprietary Ricoh MMC controller disabled (via firewire function) [ 0.399799] pci 0000:06:01.0: MMC cards are now supported by standard SDHCI controller [ 0.399911] pci 0000:06:01.0: reg 10: [mem 0xfeaff800-0xfeafffff] [ 0.400077] pci 0000:06:01.0: PME# supported from D0 D3hot D3cold [ 0.400087] pci 0000:06:01.0: PME# disabled [ 0.400175] pci 0000:06:01.1: reg 10: [mem 0xfeaff400-0xfeaff4ff] [ 0.400325] pci 0000:06:01.1: supports D1 D2 [ 0.400328] pci 0000:06:01.1: PME# supported from D0 D1 D2 D3hot D3cold [ 0.400339] pci 0000:06:01.1: PME# disabled [ 0.400426] pci 0000:06:01.2: reg 10: [mem 0xfeaff000-0xfeaff0ff] [ 0.400574] pci 0000:06:01.2: supports D1 D2 [ 0.400577] pci 0000:06:01.2: PME# supported from D0 D1 D2 D3hot D3cold [ 0.400588] pci 0000:06:01.2: PME# disabled [ 0.400675] pci 0000:06:01.3: reg 10: [mem 0xfeafec00-0xfeafecff] [ 0.400824] pci 0000:06:01.3: supports D1 D2 [ 0.400827] pci 0000:06:01.3: PME# supported from D0 D1 D2 D3hot D3cold [ 0.400837] pci 0000:06:01.3: PME# disabled [ 0.401024] pci 0000:00:1e.0: PCI bridge to [bus 06-06] (subtractive decode) [ 0.401110] pci 0000:00:1e.0: bridge window [io f000 - 0000] reg reading [ 0.401121] pci 0000:00:1e.0: bridge window [mem 0xfea00000-0xfeafffff] [ 0.401139] pci 0000:00:1e.0: bridge window [mem 0xfff00000 - 000fffff pref] reg reading [ 0.401143] pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7] (subtractive decode) [ 0.401147] pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff] (subtractive decode) [ 0.401151] pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode) [ 0.401155] pci 0000:00:1e.0: bridge window [mem 0x000d0000-0x000dffff] (subtractive decode) [ 0.401160] pci 0000:00:1e.0: bridge window [mem 0x80000000-0xffffffff] (subtractive decode) [ 0.401238] pci_bus 0000:00: on NUMA node 0 [ 0.401249] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 0.402052] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT] [ 0.402262] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P6._PRT] [ 0.402487] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P2._PRT] [ 0.402684] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P3._PRT] [ 0.402920] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P4._PRT] [ 0.447063] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 *11 12) [ 0.447921] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 *5 6 7 12) [ 0.448720] ACPI: PCI Interrupt Link [LNKC] (IRQs *3 4 5 6 7 12) [ 0.449517] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 *4 5 6 7 12) [ 0.450421] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 12) *0, disabled. [ 0.451327] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 12) *0, disabled. [ 0.452235] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 12) *0, disabled. [ 0.453141] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 *7 12) [ 0.453868] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none [ 0.453868] vgaarb: loaded [ 0.453966] SCSI subsystem initialized [ 0.460151] libata version 3.00 loaded. [ 0.460319] PCI: Using ACPI for IRQ routing [ 0.460319] PCI: pci_cache_line_size set to 64 bytes [ 0.460638] reserve RAM buffer: 000000000009fc00 - 000000000009ffff [ 0.460644] reserve RAM buffer: 000000007ffa8000 - 000000007fffffff [ 0.460763] HPET: 3 timers in total, 0 timers will be used for per-cpu timer [ 0.460763] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0 [ 0.463518] hpet0: 3 comparators, 64-bit 14.318180 MHz counter [ 0.470168] Switching to clocksource tsc [ 0.477234] pnp: PnP ACPI init [ 0.477354] ACPI: bus type pnp registered [ 0.486574] pnp: PnP ACPI: found 13 devices [ 0.486649] ACPI: ACPI bus type pnp unregistered [ 0.486724] PnPBIOS: Disabled by ACPI PNP [ 0.486832] system 00:01: [mem 0xfed13000-0xfed19fff] has been reserved [ 0.486947] system 00:08: [io 0x04d0-0x04d1] has been reserved [ 0.487025] system 00:08: [io 0x0800-0x087f] has been reserved [ 0.487102] system 00:08: [io 0x0480-0x04bf] has been reserved [ 0.487180] system 00:08: [mem 0xfed1c000-0xfed1ffff] has been reserved [ 0.487259] system 00:08: [mem 0xfed20000-0xfed3ffff] has been reserved [ 0.487337] system 00:08: [mem 0xfed45000-0xfed89fff] has been reserved [ 0.487416] system 00:08: [mem 0xfed45000-0xfed89fff] has been reserved [ 0.487496] system 00:08: [mem 0xffb00000-0xffbfffff] could not be reserved [ 0.487575] system 00:08: [mem 0xfff00000-0xffffffff] has been reserved [ 0.487681] system 00:0a: [io 0x0250-0x0253] has been reserved [ 0.487758] system 00:0a: [io 0x0256-0x025f] has been reserved [ 0.487836] system 00:0a: [mem 0xfec00000-0xfec00fff] could not be reserved [ 0.487916] system 00:0a: [mem 0xfee00000-0xfee00fff] has been reserved [ 0.487994] system 00:0a: [mem 0xfec10000-0xfec17fff] has been reserved [ 0.488073] system 00:0a: [mem 0xfec18000-0xfec1ffff] has been reserved [ 0.488152] system 00:0a: [mem 0xfec20000-0xfec27fff] has been reserved [ 0.488256] system 00:0b: [mem 0xe0000000-0xe3ffffff] has been reserved [ 0.488360] system 00:0c: [mem 0x00000000-0x0009ffff] could not be reserved [ 0.488441] system 00:0c: [mem 0x000c0000-0x000cffff] could not be reserved [ 0.488520] system 00:0c: [mem 0x000e0000-0x000fffff] could not be reserved [ 0.488600] system 00:0c: [mem 0x00100000-0x7fffffff] could not be reserved [ 0.531106] PCI: max bus depth: 1 pci_try_num: 2 [ 0.531231] pci 0000:00:1c.0: BAR 9: assigned [mem 0x80000000-0x801fffff 64bit pref] [ 0.531325] pci 0000:00:1c.1: BAR 9: assigned [mem 0x80200000-0x803fffff 64bit pref] [ 0.531419] pci 0000:00:1c.1: BAR 7: assigned [io 0x1000-0x1fff] [ 0.531495] pci 0000:00:01.0: PCI bridge to [bus 01-01] [ 0.531569] pci 0000:00:01.0: bridge window [io disabled] [ 0.531654] pci 0000:00:01.0: bridge window [mem 0xf9f00000-0xfdffffff] [ 0.531737] pci 0000:00:01.0: bridge window [mem 0xbdf00000-0xddefffff 64bit pref] [ 0.531837] pci 0000:00:1c.0: PCI bridge to [bus 02-02] [ 0.531917] pci 0000:00:1c.0: bridge window [io 0xc000-0xcfff] [ 0.532003] pci 0000:00:1c.0: bridge window [mem 0xfe000000-0xfe0fffff] [ 0.532088] pci 0000:00:1c.0: bridge window [mem 0x80000000-0x801fffff 64bit pref] [ 0.532191] pci 0000:00:1c.1: PCI bridge to [bus 03-03] [ 0.532269] pci 0000:00:1c.1: bridge window [io 0x1000-0x1fff] [ 0.532356] pci 0000:00:1c.1: bridge window [mem 0xfe100000-0xfe1fffff] [ 0.532440] pci 0000:00:1c.1: bridge window [mem 0x80200000-0x803fffff 64bit pref] [ 0.532543] pci 0000:00:1c.2: PCI bridge to [bus 04-05] [ 0.532621] pci 0000:00:1c.2: bridge window [io 0xd000-0xdfff] [ 0.532708] pci 0000:00:1c.2: bridge window [mem 0xfe200000-0xfe9fffff] [ 0.532793] pci 0000:00:1c.2: bridge window [mem 0xddf00000-0xdfefffff 64bit pref] [ 0.532896] pci 0000:00:1e.0: PCI bridge to [bus 06-06] [ 0.532970] pci 0000:00:1e.0: bridge window [io disabled] [ 0.533057] pci 0000:00:1e.0: bridge window [mem 0xfea00000-0xfeafffff] [ 0.533155] pci 0000:00:1e.0: bridge window [mem pref disabled] [ 0.533274] pci 0000:00:01.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 0.533357] pci 0000:00:01.0: setting latency timer to 64 [ 0.533384] pci 0000:00:1c.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 0.533468] pci 0000:00:1c.0: setting latency timer to 64 [ 0.533493] pci 0000:00:1c.1: enabling device (0106 -> 0107) [ 0.533580] pci 0000:00:1c.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17 [ 0.533665] pci 0000:00:1c.1: setting latency timer to 64 [ 0.533697] pci 0000:00:1c.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18 [ 0.533782] pci 0000:00:1c.2: setting latency timer to 64 [ 0.533802] pci 0000:00:1e.0: setting latency timer to 64 [ 0.533810] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7] [ 0.533814] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff] [ 0.533817] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff] [ 0.533821] pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000dffff] [ 0.533824] pci_bus 0000:00: resource 8 [mem 0x80000000-0xffffffff] [ 0.533828] pci_bus 0000:01: resource 1 [mem 0xf9f00000-0xfdffffff] [ 0.533832] pci_bus 0000:01: resource 2 [mem 0xbdf00000-0xddefffff 64bit pref] [ 0.533835] pci_bus 0000:02: resource 0 [io 0xc000-0xcfff] [ 0.533839] pci_bus 0000:02: resource 1 [mem 0xfe000000-0xfe0fffff] [ 0.533843] pci_bus 0000:02: resource 2 [mem 0x80000000-0x801fffff 64bit pref] [ 0.533846] pci_bus 0000:03: resource 0 [io 0x1000-0x1fff] [ 0.533850] pci_bus 0000:03: resource 1 [mem 0xfe100000-0xfe1fffff] [ 0.533853] pci_bus 0000:03: resource 2 [mem 0x80200000-0x803fffff 64bit pref] [ 0.533857] pci_bus 0000:04: resource 0 [io 0xd000-0xdfff] [ 0.533860] pci_bus 0000:04: resource 1 [mem 0xfe200000-0xfe9fffff] [ 0.533864] pci_bus 0000:04: resource 2 [mem 0xddf00000-0xdfefffff 64bit pref] [ 0.533868] pci_bus 0000:06: resource 1 [mem 0xfea00000-0xfeafffff] [ 0.533871] pci_bus 0000:06: resource 4 [io 0x0000-0x0cf7] [ 0.533874] pci_bus 0000:06: resource 5 [io 0x0d00-0xffff] [ 0.533878] pci_bus 0000:06: resource 6 [mem 0x000a0000-0x000bffff] [ 0.533881] pci_bus 0000:06: resource 7 [mem 0x000d0000-0x000dffff] [ 0.533885] pci_bus 0000:06: resource 8 [mem 0x80000000-0xffffffff] [ 0.534042] NET: Registered protocol family 2 [ 0.534574] IP route cache hash table entries: 32768 (order: 5, 131072 bytes) [ 0.536495] TCP established hash table entries: 131072 (order: 8, 1048576 bytes) [ 0.537327] TCP bind hash table entries: 65536 (order: 9, 2621440 bytes) [ 0.548001] TCP: Hash tables configured (established 131072 bind 65536) [ 0.548158] TCP reno registered [ 0.548243] UDP hash table entries: 512 (order: 3, 49152 bytes) [ 0.548495] UDP-Lite hash table entries: 512 (order: 3, 49152 bytes) [ 0.549154] NET: Registered protocol family 1 [ 0.549616] pci 0000:01:00.0: Boot video device [ 0.549691] PCI: CLS 32 bytes, default 64 [ 0.550056] Trying to unpack rootfs image as initramfs... [ 0.622388] Freeing initrd memory: 1668k freed [ 0.624367] Simple Boot Flag at 0x52 set to 0x1 [ 0.626918] cpufreq-nforce2: No nForce2 chipset. [ 0.627475] Scanning for low memory corruption every 60 seconds [ 0.628638] audit: initializing netlink socket (disabled) [ 0.628779] type=2000 audit(1268915769.626:1): initialized [ 0.629381] highmem bounce pool size: 64 pages [ 0.629465] HugeTLB registered 4 MB page size, pre-allocated 0 pages [ 0.646572] VFS: Disk quotas dquot_6.5.2 [ 0.647130] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 0.651947] msgmni has been set to 1712 [ 0.657215] alg: No test for stdrng (krng) [ 0.657779] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253) [ 0.657892] io scheduler noop registered [ 0.657965] io scheduler deadline registered [ 0.658320] io scheduler cfq registered (default) [ 0.659034] pcieport 0000:00:01.0: setting latency timer to 64 [ 0.659169] pcieport 0000:00:01.0: irq 24 for MSI/MSI-X [ 0.659789] pcieport 0000:00:1c.0: setting latency timer to 64 [ 0.659927] pcieport 0000:00:1c.0: irq 25 for MSI/MSI-X [ 0.660659] pcieport 0000:00:1c.1: setting latency timer to 64 [ 0.660796] pcieport 0000:00:1c.1: irq 26 for MSI/MSI-X [ 0.661538] pcieport 0000:00:1c.2: setting latency timer to 64 [ 0.661675] pcieport 0000:00:1c.2: irq 27 for MSI/MSI-X [ 0.662766] pcieport 0000:00:01.0: Requesting control of PCIe PME from ACPI BIOS [ 0.662873] pcieport 0000:00:01.0: Failed to receive control of PCIe PME service: no _OSC support [ 0.662991] pcie_pme: probe of 0000:00:01.0:pcie01 failed with error -13 [ 0.663233] pcieport 0000:00:1c.0: Requesting control of PCIe PME from ACPI BIOS [ 0.663327] pcieport 0000:00:1c.0: Failed to receive control of PCIe PME service: no _OSC support [ 0.663426] pcie_pme: probe of 0000:00:1c.0:pcie01 failed with error -13 [ 0.663524] pcieport 0000:00:1c.1: Requesting control of PCIe PME from ACPI BIOS [ 0.669504] pcieport 0000:00:1c.1: Failed to receive control of PCIe PME service: no _OSC support [ 0.669605] pcie_pme: probe of 0000:00:1c.1:pcie01 failed with error -13 [ 0.669703] pcieport 0000:00:1c.2: Requesting control of PCIe PME from ACPI BIOS [ 0.669805] pcieport 0000:00:1c.2: Failed to receive control of PCIe PME service: no _OSC support [ 0.669908] pcie_pme: probe of 0000:00:1c.2:pcie01 failed with error -13 [ 0.671026] nvidiafb 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 0.681415] nvidiafb: Device ID: 10de01d7 [ 0.693097] nvidiafb: CRTC0 analog not found [ 0.706417] nvidiafb: CRTC1 analog not found [ 0.706496] nvidiafb: CRTC 0 is currently programmed for DFP [ 0.706571] nvidiafb: Using DFP on CRTC 0 [ 0.706644] nvidiafb: Panel size is 1280 x 800 [ 0.706717] nvidiafb: Panel is LVDS [ 0.747496] nvidiafb: MTRR set to ON [ 0.747578] fbcvt: 1280x...@60: CVT Name - 1.024MA-R [ 0.906708] nvidiafb: Flat panel dithering disabled [ 0.909259] Console: switching to colour frame buffer device 160x50 [ 0.910795] nvidiafb: PCI nVidia NV1d framebuffer (64MB @ 0xC0000000) [ 0.911974] ACPI: AC Adapter [AC0] (on-line) [ 0.912855] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input0 [ 0.914735] ACPI: Lid Switch [LID] [ 0.915094] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input1 [ 0.915136] ACPI: Power Button [PWRB] [ 0.915488] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input2 [ 0.915524] ACPI: Sleep Button [SLPB] [ 0.915868] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3 [ 0.915900] ACPI: Power Button [PWRF] [ 0.920239] acpi device:17: registered as cooling_device0 [ 0.920934] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:13/LNXVIDEO:00/input/input4 [ 0.920973] ACPI: Video Device [VGA] (multi-head: yes rom: no post: no) [ 0.921704] Marking TSC unstable due to TSC halts in idle [ 0.922451] Switching to clocksource hpet [ 0.932592] ACPI: thermal control disabled [ 0.933506] isapnp: Scanning for PnP cards... [ 1.125764] ACPI: Battery Slot [BAT0] (battery present) [ 1.291099] isapnp: No Plug & Play device found [ 1.307865] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 1.320619] brd: module loaded [ 1.320890] Uniform Multi-Platform E-IDE driver [ 1.321792] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12 [ 1.324381] i8042.c: Detected active multiplexing controller, rev 1.1. [ 1.326309] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 1.327128] serio: i8042 AUX0 port at 0x60,0x64 irq 12 [ 1.327768] serio: i8042 AUX1 port at 0x60,0x64 irq 12 [ 1.328415] serio: i8042 AUX2 port at 0x60,0x64 irq 12 [ 1.329059] serio: i8042 AUX3 port at 0x60,0x64 irq 12 [ 1.330280] mice: PS/2 mouse device common for all mice [ 1.331199] rtc_cmos 00:03: RTC can wake from S4 [ 1.332279] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0 [ 1.333021] rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs [ 1.333981] i2c /dev entries driver [ 1.336895] EDAC MC: Ver: 2.1.0 Mar 16 2010 [ 1.339594] cpuidle: using governor ladder [ 1.342863] cpuidle: using governor menu [ 1.346080] TCP cubic registered [ 1.346990] NET: Registered protocol family 17 [ 1.365057] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input5 [ 1.402147] Using IPI No-Shortcut mode [ 1.403850] registered taskstats version 1 [ 1.405856] rtc_cmos 00:03: setting system clock to 2010-03-18 12:36:10 UTC (1268915770) [ 1.407469] Freeing unused kernel memory: 1640k freed [ 1.410125] Write protecting the kernel text: 2852k [ 1.411407] Write protecting the kernel read-only data: 1448k [ 1.490388] ata_piix 0000:00:1f.2: version 2.13 [ 1.490455] ata_piix 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19 [ 1.491563] ata_piix 0000:00:1f.2: MAP [ P0 P2 IDE IDE ] [ 1.492752] ata_piix 0000:00:1f.2: setting latency timer to 64 [ 1.493045] scsi0 : ata_piix [ 1.494814] scsi1 : ata_piix [ 1.500585] ata1: SATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xffa0 irq 14 [ 1.501554] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xffa8 irq 15 [ 1.670983] ata2.00: ATAPI: HL-DT-ST DVDRAM GSA-T10N, PR03, max UDMA/33 [ 1.672522] ata1.00: ATA-7: Hitachi HTS541212H9SA00, HP4OC20F, max UDMA/100 [ 1.673924] ata1.00: 234441648 sectors, multi 16: LBA48 NCQ (depth 0/32) [ 1.683844] ata2.00: configured for UDMA/33 [ 1.687589] ata1.00: configured for UDMA/100 [ 1.702281] scsi 0:0:0:0: Direct-Access ATA Hitachi HTS54121 HP4O PQ: 0 ANSI: 5 [ 1.710649] scsi 1:0:0:0: CD-ROM HL-DT-ST DVDRAM GSA-T10N PR03 PQ: 0 ANSI: 5 [ 1.742815] usbcore: registered new interface driver usbfs [ 1.744139] usbcore: registered new interface driver hub [ 1.746156] sd 0:0:0:0: [sda] 234441648 512-byte logical blocks: (120 GB/111 GiB) [ 1.747464] sd 0:0:0:0: [sda] Write Protect is off [ 1.748417] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 1.748549] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1.748639] usbcore: registered new device driver usb [ 1.751551] sda: sda1 sda2 < sda5 sda6 sda7 sda8 sda9 > [ 1.841569] sd 0:0:0:0: [sda] Attached SCSI disk [ 1.857671] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 1.858885] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23 [ 1.859979] ehci_hcd 0000:00:1d.7: setting latency timer to 64 [ 1.859987] ehci_hcd 0000:00:1d.7: EHCI Host Controller [ 1.861474] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1 [ 1.862570] ehci_hcd 0000:00:1d.7: using broken periodic workaround [ 1.863684] ehci_hcd 0000:00:1d.7: debug port 1 [ 1.868815] ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported [ 1.868876] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xfebfbc00 [ 1.869961] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray [ 1.871015] Uniform CD-ROM driver Revision: 3.20 [ 1.872981] sr 1:0:0:0: Attached scsi CD-ROM sr0 [ 1.884348] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00 [ 1.885820] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 [ 1.886922] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.888064] usb usb1: Product: EHCI Host Controller [ 1.889115] usb usb1: Manufacturer: Linux 2.6.34-rc1-dbg-git6-r8169 ehci_hcd [ 1.890159] usb usb1: SerialNumber: 0000:00:1d.7 [ 1.892714] hub 1-0:1.0: USB hub found [ 1.893763] hub 1-0:1.0: 8 ports detected [ 1.909732] uhci_hcd: USB Universal Host Controller Interface driver [ 1.911015] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23 [ 1.912130] uhci_hcd 0000:00:1d.0: setting latency timer to 64 [ 1.912139] uhci_hcd 0000:00:1d.0: UHCI Host Controller [ 1.913263] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2 [ 1.914461] uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000ec00 [ 1.915739] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001 [ 1.916942] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.917974] usb usb2: Product: UHCI Host Controller [ 1.918975] usb usb2: Manufacturer: Linux 2.6.34-rc1-dbg-git6-r8169 uhci_hcd [ 1.919958] usb usb2: SerialNumber: 0000:00:1d.0 [ 1.921525] hub 2-0:1.0: USB hub found [ 1.922663] hub 2-0:1.0: 2 ports detected [ 1.924088] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19 [ 1.925088] uhci_hcd 0000:00:1d.1: setting latency timer to 64 [ 1.925096] uhci_hcd 0000:00:1d.1: UHCI Host Controller [ 1.926098] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3 [ 1.927231] uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000e880 [ 1.928359] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001 [ 1.929346] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.930337] usb usb3: Product: UHCI Host Controller [ 1.931312] usb usb3: Manufacturer: Linux 2.6.34-rc1-dbg-git6-r8169 uhci_hcd [ 1.932276] usb usb3: SerialNumber: 0000:00:1d.1 [ 1.933718] hub 3-0:1.0: USB hub found [ 1.934921] hub 3-0:1.0: 2 ports detected [ 1.936853] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18 [ 1.937892] uhci_hcd 0000:00:1d.2: setting latency timer to 64 [ 1.937900] uhci_hcd 0000:00:1d.2: UHCI Host Controller [ 1.938934] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4 [ 1.940057] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000e800 [ 1.941243] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001 [ 1.942241] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.943247] usb usb4: Product: UHCI Host Controller [ 1.944208] usb usb4: Manufacturer: Linux 2.6.34-rc1-dbg-git6-r8169 uhci_hcd [ 1.945125] usb usb4: SerialNumber: 0000:00:1d.2 [ 1.946429] hub 4-0:1.0: USB hub found [ 1.947445] hub 4-0:1.0: 2 ports detected [ 1.948740] uhci_hcd 0000:00:1d.3: PCI INT D -> GSI 16 (level, low) -> IRQ 16 [ 1.949678] uhci_hcd 0000:00:1d.3: setting latency timer to 64 [ 1.949685] uhci_hcd 0000:00:1d.3: UHCI Host Controller [ 1.950645] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5 [ 1.951651] uhci_hcd 0000:00:1d.3: irq 16, io base 0x0000e480 [ 1.952760] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001 [ 1.953810] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.954827] usb usb5: Product: UHCI Host Controller [ 1.955842] usb usb5: Manufacturer: Linux 2.6.34-rc1-dbg-git6-r8169 uhci_hcd [ 1.957033] usb usb5: SerialNumber: 0000:00:1d.3 [ 1.958363] hub 5-0:1.0: USB hub found [ 1.959321] hub 5-0:1.0: 2 ports detected [ 2.201091] usb 1-8: new high speed USB device using ehci_hcd and address 2 [ 2.327718] usb 1-8: New USB device found, idVendor=05e1, idProduct=0501 [ 2.328884] usb 1-8: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 2.330440] usb 1-8: Product: USB 2.0 Image Capture Controller [ 2.331424] usb 1-8: Manufacturer: Syntek Semiconductor [ 3.788623] EXT4-fs (sda5): mounted filesystem with ordered data mode [ 5.854647] udev: starting version 151 [ 6.782844] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded [ 6.782897] r8169 0000:02:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 6.783008] r8169 0000:02:00.0: setting latency timer to 64 [ 6.783192] r8169 0000:02:00.0: irq 28 for MSI/MSI-X [ 6.785492] r8169 0000:02:00.0: eth0: RTL8168b/8111b at 0xf917a000, 00:1a:92:c9:a0:68, XID 18000000 IRQ 28 [ 6.885382] i801_smbus 0000:00:1f.3: PCI INT B -> GSI 19 (level, low) -> IRQ 19 [ 6.885391] ACPI: I/O resource 0000:00:1f.3 [0x400-0x41f] conflicts with ACPI region SMB0 [0x400-0x40f] [ 6.885395] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 6.885989] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 6.890100] sr 1:0:0:0: Attached scsi generic sg1 type 5 [ 6.929400] intel_rng: FWH not detected [ 7.802994] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 7.803158] HDA Intel 0000:00:1b.0: irq 29 for MSI/MSI-X [ 7.803332] HDA Intel 0000:00:1b.0: setting latency timer to 64 [ 7.837738] sdhci: Secure Digital Host Controller Interface driver [ 7.837743] sdhci: Copyright(c) Pierre Ossman [ 7.840109] sdhci-pci 0000:06:01.1: SDHCI controller found [1180:0822] (rev 19) [ 7.840151] sdhci-pci 0000:06:01.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17 [ 7.841386] sdhci-pci 0000:06:01.1: Will use DMA mode even though HW doesn't fully claim to support it. [ 7.916948] Registered led device: mmc0:: [ 7.917807] mmc0: SDHCI controller on PCI [0000:06:01.1] using DMA [ 8.094125] asus_laptop: Asus Laptop Support version 0.42 [ 8.147540] asus_laptop: F3JC model detected [ 8.148295] asus_laptop: Backlight controlled by ACPI video driver [ 8.148497] input: Asus Laptop extra buttons as /devices/platform/asus_laptop/input/input6 [ 8.216563] Registered led device: asus::touchpad [ 8.238826] Synaptics Touchpad, model: 1, fw: 6.1, id: 0xa3a0b3, caps: 0xa04713/0x10008 [ 8.334245] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio4/input/input7 [ 8.365569] hda_codec: ALC660-VD: BIOS auto-probing. Sergey -- Configure bugmail: http://bugzilla.kernel.org/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are watching the assignee of the bug. ------------------------------------------------------------------------------ Download Intel® Parallel Studio Eval Try the new software tools for yourself. Speed compiling, find bugs proactively, and fine-tune applications for parallel performance. See why Intel Parallel Studio got high marks during beta. http://p.sf.net/sfu/intel-sw-dev _______________________________________________ acpi-bugzilla mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/acpi-bugzilla
