https://bugzilla.kernel.org/show_bug.cgi?id=68591

--- Comment #1 from Bodo Eggert <7egg...@gmx.de> ---
dmesg from 2.6.32.5-amd64:

[    0.000000] Initializing cgroup subsys cpuset
[    0.000000] Initializing cgroup subsys cpu
[    0.000000] Linux version 2.6.32-5-amd64 (Debian 2.6.32-48squeeze4)
(da...@debian.org) (gcc version 4.3.5 (Debian 4.3.5-4) ) #1 SMP Mon Sep 23
22:14:43 UTC 2013
[    0.000000] Command line: BOOT_IMAGE=l ro root=900
[    0.000000] KERNEL supported cpus:
[    0.000000]   Intel GenuineIntel
[    0.000000]   AMD AuthenticAMD
[    0.000000]   Centaur CentaurHauls
[    0.000000] BIOS-provided physical RAM map:
[    0.000000]  BIOS-e820: 0000000000000000 - 000000000009f800 (usable)
[    0.000000]  BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
[    0.000000]  BIOS-e820: 00000000000e5000 - 0000000000100000 (reserved)
[    0.000000]  BIOS-e820: 0000000000100000 - 00000000cffa0000 (usable)
[    0.000000]  BIOS-e820: 00000000cffa0000 - 00000000cffb0000 (ACPI data)
[    0.000000]  BIOS-e820: 00000000cffb0000 - 00000000cffe0000 (ACPI NVS)
[    0.000000]  BIOS-e820: 00000000cffe0000 - 00000000d0000000 (reserved)
[    0.000000]  BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved)
[    0.000000]  BIOS-e820: 0000000100000000 - 0000000230000000 (usable)
[    0.000000] DMI present.
[    0.000000] AMI BIOS detected: BIOS may corrupt low RAM, working around it.
[    0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable)
==> (reserved)
[    0.000000] last_pfn = 0x230000 max_arch_pfn = 0x400000000
[    0.000000] MTRR default type: uncachable
[    0.000000] MTRR fixed ranges enabled:
[    0.000000]   00000-9FFFF write-back
[    0.000000]   A0000-EFFFF uncachable
[    0.000000]   F0000-FFFFF write-protect
[    0.000000] MTRR variable ranges enabled:
[    0.000000]   0 base 000000000000 mask FFFF80000000 write-back
[    0.000000]   1 base 000080000000 mask FFFFC0000000 write-back
[    0.000000]   2 base 0000C0000000 mask FFFFF0000000 write-back
[    0.000000]   3 disabled
[    0.000000]   4 disabled
[    0.000000]   5 disabled
[    0.000000]   6 disabled
[    0.000000]   7 disabled
[    0.000000] TOM2: 0000000230000000 aka 8960M
[    0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[    0.000000] e820 update range: 00000000d0000000 - 0000000100000000 (usable)
==> (reserved)
[    0.000000] last_pfn = 0xcffa0 max_arch_pfn = 0x400000000
[    0.000000] initial memory mapped : 0 - 20000000
[    0.000000] Using GB pages for direct mapping
[    0.000000] init_memory_mapping: 0000000000000000-00000000cffa0000
[    0.000000]  0000000000 - 00c0000000 page 1G
[    0.000000]  00c0000000 - 00cfe00000 page 2M
[    0.000000]  00cfe00000 - 00cffa0000 page 4k
[    0.000000] kernel direct mapping tables up to cffa0000 @ 10000-13000
[    0.000000] init_memory_mapping: 0000000100000000-0000000230000000
[    0.000000]  0100000000 - 0200000000 page 1G
[    0.000000]  0200000000 - 0230000000 page 2M
[    0.000000] kernel direct mapping tables up to 230000000 @ 12000-14000
[    0.000000] RAMDISK: 7f5e1000 - 7ffff2eb
[    0.000000] ACPI: RSDP 00000000000fbd70 00014 (v00 ACPIAM)
[    0.000000] ACPI: RSDT 00000000cffa0000 00044 (v01 082611 RSDT1651 20110826
MSFT 00000097)
[    0.000000] ACPI: FACP 00000000cffa0200 00084 (v01 A_M_I  OEMFACP  12000601
MSFT 00000097)
[    0.000000] ACPI: DSDT 00000000cffa0450 04764 (v01  AS379 AS379133 00000133
INTL 20051117)
[    0.000000] ACPI: FACS 00000000cffb0000 00040
[    0.000000] ACPI: APIC 00000000cffa0390 0007C (v01 082611 APIC1651 20110826
MSFT 00000097)
[    0.000000] ACPI: MCFG 00000000cffa0410 0003C (v01 082611 OEMMCFG  20110826
MSFT 00000097)
[    0.000000] ACPI: OEMB 00000000cffb0040 00072 (v01 082611 OEMB1651 20110826
MSFT 00000097)
[    0.000000] ACPI: SRAT 00000000cffaa450 000C8 (v03 AMD    FAM_F_10 00000002
AMD  00000001)
[    0.000000] ACPI: AAFT 00000000cffaa520 00027 (v01 082611 OEMAAFT  20110826
MSFT 00000097)
[    0.000000] ACPI: HPET 00000000cffaa550 00038 (v01 082611 OEMHPET  20110826
MSFT 00000097)
[    0.000000] ACPI: SSDT 00000000cffaa590 00458 (v01 A M I  POWERNOW 00000001
AMD  00000001)
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] SRAT: PXM 0 -> APIC 0 -> Node 0
[    0.000000] SRAT: PXM 0 -> APIC 1 -> Node 0
[    0.000000] SRAT: Node 0 PXM 0 0-a0000
[    0.000000] SRAT: Node 0 PXM 0 100000-d0000000
[    0.000000] SRAT: Node 0 PXM 0 100000000-230000000
[    0.000000] NUMA: Allocated memnodemap from 13000 - 17640
[    0.000000] NUMA: Using 20 for the hash shift.
[    0.000000] Bootmem setup node 0 0000000000000000-0000000230000000
[    0.000000]   NODE_DATA [0000000000017640 - 000000000001f63f]
[    0.000000]   bootmap [0000000000020000 -  0000000000065fff] pages 46
[    0.000000] (9 early reservations) ==> bootmem [0000000000 - 0230000000]
[    0.000000]   #0 [0000000000 - 0000001000]   BIOS data page ==> [0000000000
- 0000001000]
[    0.000000]   #1 [0000006000 - 0000008000]       TRAMPOLINE ==> [0000006000
- 0000008000]
[    0.000000]   #2 [0001000000 - 00016d7584]    TEXT DATA BSS ==> [0001000000
- 00016d7584]
[    0.000000]   #3 [007f5e1000 - 007ffff2eb]          RAMDISK ==> [007f5e1000
- 007ffff2eb]
[    0.000000]   #4 [000009f800 - 0000100000]    BIOS reserved ==> [000009f800
- 0000100000]
[    0.000000]   #5 [00016d8000 - 00016d812b]              BRK ==> [00016d8000
- 00016d812b]
[    0.000000]   #6 [0000010000 - 0000012000]          PGTABLE ==> [0000010000
- 0000012000]
[    0.000000]   #7 [0000012000 - 0000013000]          PGTABLE ==> [0000012000
- 0000013000]
[    0.000000]   #8 [0000013000 - 0000017640]       MEMNODEMAP ==> [0000013000
- 0000017640]
[    0.000000] found SMP MP-table at [ffff8800000ff780] ff780
[    0.000000]  [ffffea0000000000-ffffea0007bfffff] PMD ->
[ffff880001800000-ffff8800089fffff] on node 0
[    0.000000] Zone PFN ranges:
[    0.000000]   DMA      0x00000010 -> 0x00001000
[    0.000000]   DMA32    0x00001000 -> 0x00100000
[    0.000000]   Normal   0x00100000 -> 0x00230000
[    0.000000] Movable zone start PFN for each node
[    0.000000] early_node_map[3] active PFN ranges
[    0.000000]     0: 0x00000010 -> 0x0000009f
[    0.000000]     0: 0x00000100 -> 0x000cffa0
[    0.000000]     0: 0x00100000 -> 0x00230000
[    0.000000] On node 0 totalpages: 2096943
[    0.000000]   DMA zone: 56 pages used for memmap
[    0.000000]   DMA zone: 106 pages reserved
[    0.000000]   DMA zone: 3821 pages, LIFO batch:0
[    0.000000]   DMA32 zone: 14280 pages used for memmap
[    0.000000]   DMA32 zone: 833496 pages, LIFO batch:31
[    0.000000]   Normal zone: 17024 pages used for memmap
[    0.000000]   Normal zone: 1228160 pages, LIFO batch:31
[    0.000000] ACPI: PM-Timer IO Port: 0x808
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x82] disabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x83] disabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x84] disabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x85] disabled)
[    0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[    0.000000] IOAPIC[0]: apic_id 2, version 33, address 0xfec00000, GSI 0-23
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
[    0.000000] ACPI: IRQ0 used by override.
[    0.000000] ACPI: IRQ2 used by override.
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] ACPI: HPET id: 0x43538301 base: 0xfed00000
[    0.000000] SMP: Allowing 6 CPUs, 4 hotplug CPUs
[    0.000000] nr_irqs_gsi: 24
[    0.000000] PM: Registered nosave memory: 000000000009f000 -
00000000000a0000
[    0.000000] PM: Registered nosave memory: 00000000000a0000 -
00000000000e5000
[    0.000000] PM: Registered nosave memory: 00000000000e5000 -
0000000000100000
[    0.000000] PM: Registered nosave memory: 00000000cffa0000 -
00000000cffb0000
[    0.000000] PM: Registered nosave memory: 00000000cffb0000 -
00000000cffe0000
[    0.000000] PM: Registered nosave memory: 00000000cffe0000 -
00000000d0000000
[    0.000000] PM: Registered nosave memory: 00000000d0000000 -
00000000fff80000
[    0.000000] PM: Registered nosave memory: 00000000fff80000 -
0000000100000000
[    0.000000] Allocating PCI resources starting at d0000000 (gap:
d0000000:2ff80000)
[    0.000000] Booting paravirtualized kernel on bare hardware
[    0.000000] NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:6 nr_node_ids:1
[    0.000000] PERCPU: Embedded 30 pages/cpu @ffff880008c00000 s90392 r8192
d24296 u262144
[    0.000000] pcpu-alloc: s90392 r8192 d24296 u262144 alloc=1*2097152
[    0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 - - 
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total
pages: 2065477
[    0.000000] Policy zone: Normal
[    0.000000] Kernel command line: BOOT_IMAGE=l ro root=900
[    0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[    0.000000] Initializing CPU#0
[    0.000000] Checking aperture...
[    0.000000] No AGP bridge found
[    0.000000] Node 0: aperture @ b9c4000000 size 32 MB
[    0.000000] Aperture beyond 4GB. Ignoring.
[    0.000000] Your BIOS doesn't leave a aperture memory hole
[    0.000000] Please enable the IOMMU option in the BIOS setup
[    0.000000] This costs you 64 MB of RAM
[    0.000000] Mapping aperture over 65536 KB of RAM @ 20000000
[    0.000000] PM: Registered nosave memory: 0000000020000000 -
0000000024000000
[    0.000000] Memory: 8186964k/9175040k available (3087k kernel code, 787268k
absent, 200808k reserved, 2036k data, 592k init)
[    0.000000] SLUB: Genslabs=14, HWalign=64, Order=0-3, MinObjects=0, CPUs=6,
Nodes=1
[    0.000000] Hierarchical RCU implementation.
[    0.000000] NR_IRQS:4352 nr_irqs:456
[    0.000000] Console: colour VGA+ 80x25
[    0.000000] console [tty0] enabled
[    0.000000] hpet clockevent registered
[    0.000000] Fast TSC calibration using PIT
[    0.000000] Detected 3012.401 MHz processor.
[    0.008004] Calibrating delay loop (skipped), value calculated using timer
frequency.. 6024.79 BogoMIPS (lpj=12049588)
[    0.008136] Security Framework initialized
[    0.008196] SELinux:  Disabled at boot.
[    0.008656] Dentry cache hash table entries: 1048576 (order: 11, 8388608
bytes)
[    0.012775] Inode-cache hash table entries: 524288 (order: 10, 4194304
bytes)
[    0.014216] Mount-cache hash table entries: 256
[    0.014379] Initializing cgroup subsys ns
[    0.014440] Initializing cgroup subsys cpuacct
[    0.014500] Initializing cgroup subsys devices
[    0.014560] Initializing cgroup subsys freezer
[    0.014619] Initializing cgroup subsys net_cls
[    0.014693] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64
bytes/line)
[    0.014755] CPU: L2 Cache: 1024K (64 bytes/line)
[    0.014815] CPU 0/0x0 -> Node 0
[    0.014874] tseg: 0000000000
[    0.014884] CPU: Physical Processor ID: 0
[    0.014942] CPU: Processor Core ID: 0
[    0.015001] mce: CPU supports 6 MCE banks
[    0.015067] Performance Events: AMD PMU driver.
[    0.015173] ... version:                0
[    0.015232] ... bit width:              48
[    0.015290] ... generic registers:      4
[    0.015349] ... value mask:             0000ffffffffffff
[    0.015409] ... max period:             00007fffffffffff
[    0.015469] ... fixed-purpose events:   0
[    0.015528] ... event mask:             000000000000000f
[    0.016378] ACPI: Core revision 20090903
[    0.020914] Setting APIC routing to flat
[    0.021295] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[    0.061263] CPU0: AMD Athlon(tm) II X2 250 Processor stepping 03
[    0.064001] Booting processor 1 APIC 0x1 ip 0x6000
[    0.012000] Initializing CPU#1
[    0.012000] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64
bytes/line)
[    0.012000] CPU: L2 Cache: 1024K (64 bytes/line)
[    0.012000] CPU 1/0x1 -> Node 0
[    0.012000] CPU: Physical Processor ID: 0
[    0.012000] CPU: Processor Core ID: 1
[    0.148029] CPU1: AMD Athlon(tm) II X2 250 Processor stepping 03
[    0.148532] checking TSC synchronization [CPU#0 -> CPU#1]: passed.
[    0.152011] Brought up 2 CPUs
[    0.152069] Total of 2 processors activated (12050.40 BogoMIPS).
[    0.152481] CPU0 attaching sched-domain:
[    0.152484]  domain 0: span 0-1 level MC
[    0.152486]   groups: group ffff880008c0fbf0 cpus 0 group ffff880008c4fbf0
cpus 1
[    0.152491] CPU1 attaching sched-domain:
[    0.152492]  domain 0: span 0-1 level MC
[    0.152494]   groups: group ffff880008c4fbf0 cpus 1 group ffff880008c0fbf0
cpus 0
[    0.152544] devtmpfs: initialized
[    0.154121] regulator: core version 0.5
[    0.154121] NET: Registered protocol family 16
[    0.154121] node 0 link 0: io port [1000, ffffff]
[    0.154121] TOM: 00000000d0000000 aka 3328M
[    0.154121] Fam 10h mmconf [0xe0000000-0xefffffff]
[    0.154121] node 0 link 0: mmio [e0000000, efffffff] ==> none
[    0.154121] node 0 link 0: mmio [d0000000, dfffffff]
[    0.154121] node 0 link 0: mmio [a0000, bffff]
[    0.154121] node 0 link 0: mmio [f0000000, ffffffff]
[    0.154121] TOM2: 0000000230000000 aka 8960M
[    0.156006] bus: [00,07] on node 0 link 0
[    0.156008] bus: 00 index 0 io port: [0, ffff]
[    0.156009] bus: 00 index 1 mmio: [d0000000, dfffffff]
[    0.156010] bus: 00 index 2 mmio: [a0000, bffff]
[    0.156012] bus: 00 index 3 mmio: [f0000000, ffffffff]
[    0.156013] bus: 00 index 4 mmio: [230000000, fcffffffff]
[    0.156025] ACPI: bus type pci registered
[    0.156133] PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255
[    0.156195] PCI: Not using MMCONFIG.
[    0.156254] PCI: Using configuration type 1 for base access
[    0.156314] PCI: Using configuration type 1 for extended access
[    0.156673] bio: create slab <bio-0> at 0
[    0.156673] ACPI: EC: Look up EC in DSDT
[    0.157801] ACPI: Executed 2 blocks of module-level executable AML code
[    0.162623] ACPI: Interpreter enabled
[    0.162682] ACPI: (supports S0 S1 S3 S4 S5)
[    0.162980] ACPI: Using IOAPIC for interrupt routing
[    0.163074] PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255
[    0.170270] PCI: MCFG area at e0000000 reserved in ACPI motherboard
resources
[    0.175446] PCI: Using MMCONFIG at e0000000 - efffffff
[    0.180219] ACPI Warning: Incorrect checksum in table [OEMB] - C1, should be
BC (20090903/tbutils-314)
[    0.180470] ACPI: No dock devices found.
[    0.180756] ACPI: PCI Root Bridge [PCI0] (0000:00)
[    0.180881] pci 0000:00:02.0: PME# supported from D0 D3hot D3cold
[    0.180943] pci 0000:00:02.0: PME# disabled
[    0.181038] pci 0000:00:05.0: PME# supported from D0 D3hot D3cold
[    0.181099] pci 0000:00:05.0: PME# disabled
[    0.181217] pci 0000:00:12.0: reg 10 io port: [0xb000-0xb007]
[    0.181224] pci 0000:00:12.0: reg 14 io port: [0xa000-0xa003]
[    0.181230] pci 0000:00:12.0: reg 18 io port: [0x9000-0x9007]
[    0.181237] pci 0000:00:12.0: reg 1c io port: [0x8000-0x8003]
[    0.181244] pci 0000:00:12.0: reg 20 io port: [0x7000-0x700f]
[    0.181251] pci 0000:00:12.0: reg 24 32bit mmio: [0xf9fffc00-0xf9ffffff]
[    0.181325] pci 0000:00:13.0: reg 10 32bit mmio: [0xf9ffe000-0xf9ffefff]
[    0.181387] pci 0000:00:13.1: reg 10 32bit mmio: [0xf9ffd000-0xf9ffdfff]
[    0.181449] pci 0000:00:13.2: reg 10 32bit mmio: [0xf9ffc000-0xf9ffcfff]
[    0.181511] pci 0000:00:13.3: reg 10 32bit mmio: [0xf9ffb000-0xf9ffbfff]
[    0.181571] pci 0000:00:13.4: reg 10 32bit mmio: [0xf9ffa000-0xf9ffafff]
[    0.181661] pci 0000:00:13.5: reg 10 32bit mmio: [0xf9fff800-0xf9fff8ff]
[    0.181742] pci 0000:00:13.5: supports D1 D2
[    0.181744] pci 0000:00:13.5: PME# supported from D0 D1 D2 D3hot
[    0.181807] pci 0000:00:13.5: PME# disabled
[    0.181916] pci 0000:00:14.0: reg 10 io port: [0xb00-0xb0f]
[    0.181922] pci 0000:00:14.0: reg 14 32bit mmio: [0xfed00000-0xfed003ff]
[    0.182011] pci 0000:00:14.1: reg 10 io port: [0x00-0x07]
[    0.182018] pci 0000:00:14.1: reg 14 io port: [0x00-0x03]
[    0.182024] pci 0000:00:14.1: reg 18 io port: [0x00-0x07]
[    0.182031] pci 0000:00:14.1: reg 1c io port: [0x00-0x03]
[    0.182037] pci 0000:00:14.1: reg 20 io port: [0xff00-0xff0f]
[    0.182128] pci 0000:00:14.2: reg 10 64bit mmio: [0xf9ff4000-0xf9ff7fff]
[    0.182197] pci 0000:00:14.2: PME# supported from D0 D3hot D3cold
[    0.182260] pci 0000:00:14.2: PME# disabled
[    0.182512] pci 0000:01:00.0: reg 10 32bit mmio: [0xfd000000-0xfdffffff]
[    0.182519] pci 0000:01:00.0: reg 14 64bit mmio pref:
[0xd0000000-0xdfffffff]
[    0.182527] pci 0000:01:00.0: reg 1c 64bit mmio: [0xfa000000-0xfbffffff]
[    0.182531] pci 0000:01:00.0: reg 24 io port: [0xc800-0xc87f]
[    0.182535] pci 0000:01:00.0: reg 30 32bit mmio pref:
[0xfeae0000-0xfeafffff]
[    0.188082] pci 0000:00:02.0: bridge io port: [0xc000-0xcfff]
[    0.188086] pci 0000:00:02.0: bridge 32bit mmio: [0xfa000000-0xfeafffff]
[    0.188088] pci 0000:00:02.0: bridge 32bit mmio pref:
[0xd0000000-0xdfffffff]
[    0.188132] pci 0000:03:00.0: reg 10 io port: [0xe800-0xe8ff]
[    0.188149] pci 0000:03:00.0: reg 18 64bit mmio pref:
[0xf8fff000-0xf8ffffff]
[    0.188161] pci 0000:03:00.0: reg 20 64bit mmio pref:
[0xf8ff8000-0xf8ffbfff]
[    0.188230] pci 0000:03:00.0: supports D1 D2
[    0.188232] pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.188298] pci 0000:03:00.0: PME# disabled
[    0.196098] pci 0000:00:05.0: bridge io port: [0xe000-0xefff]
[    0.196102] pci 0000:00:05.0: bridge 32bit mmio pref:
[0xf8f00000-0xf8ffffff]
[    0.196159] pci 0000:02:05.0: reg 10 io port: [0xd800-0xd807]
[    0.196168] pci 0000:02:05.0: reg 14 32bit mmio: [0xfebffc00-0xfebffcff]
[    0.196240] pci 0000:02:05.0: supports D1 D2
[    0.196242] pci 0000:02:05.0: PME# supported from D0 D1 D2 D3hot
[    0.196308] pci 0000:02:05.0: PME# disabled
[    0.196405] pci 0000:02:07.0: reg 10 io port: [0xd400-0xd47f]
[    0.196505] pci 0000:00:14.4: transparent bridge
[    0.196567] pci 0000:00:14.4: bridge io port: [0xd000-0xdfff]
[    0.196571] pci 0000:00:14.4: bridge 32bit mmio: [0xfeb00000-0xfebfffff]
[    0.196592] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[    0.196744] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0PC._PRT]
[    0.196824] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCE2._PRT]
[    0.196865] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCE5._PRT]
[    0.199727] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 *5 7 10 11 12 14 15)
[    0.200351] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 7 10 11 12 14 *15)
[    0.200978] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 7 *10 11 12 14 15)
[    0.201601] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 7 *10 11 12 14 15)
[    0.202225] ACPI: PCI Interrupt Link [LNKE] (IRQs *3 4 5 7 10 11 12 14 15)
[    0.202851] ACPI: PCI Interrupt Link [LNKF] (IRQs 9) *0, disabled.
[    0.203203] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 7 10 *11 12 14 15)
[    0.203825] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 7 10 11 12 14 15)
*0, disabled.
[    0.204591] vgaarb: device added:
PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
[    0.204664] vgaarb: loaded
[    0.204733] PCI: Using ACPI for IRQ routing
[    0.204733] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0
[    0.204733] hpet0: 4 comparators, 32-bit 14.318180 MHz counter
[    0.206595] Switching to clocksource tsc
[    0.206664] pnp: PnP ACPI init
[    0.206664] ACPI: bus type pnp registered
[    0.207562] pnp: PnP ACPI: found 15 devices
[    0.207621] ACPI: ACPI bus type pnp unregistered
[    0.207688] system 00:07: iomem range 0xfec00000-0xfec00fff could not be
reserved
[    0.207760] system 00:07: iomem range 0xfee00000-0xfee00fff has been
reserved
[    0.207825] system 00:08: ioport range 0x4d0-0x4d1 has been reserved
[    0.207887] system 00:08: ioport range 0x40b-0x40b has been reserved
[    0.207949] system 00:08: ioport range 0x4d6-0x4d6 has been reserved
[    0.208010] system 00:08: ioport range 0xc00-0xc01 has been reserved
[    0.208072] system 00:08: ioport range 0xc14-0xc14 has been reserved
[    0.208134] system 00:08: ioport range 0xc50-0xc51 has been reserved
[    0.208197] system 00:08: ioport range 0xc52-0xc52 has been reserved
[    0.208259] system 00:08: ioport range 0xc6c-0xc6c has been reserved
[    0.208320] system 00:08: ioport range 0xc6f-0xc6f has been reserved
[    0.208382] system 00:08: ioport range 0xcd0-0xcd1 has been reserved
[    0.208444] system 00:08: ioport range 0xcd2-0xcd3 has been reserved
[    0.208505] system 00:08: ioport range 0xcd4-0xcd5 has been reserved
[    0.208567] system 00:08: ioport range 0xcd6-0xcd7 has been reserved
[    0.208629] system 00:08: ioport range 0xcd8-0xcdf has been reserved
[    0.208691] system 00:08: ioport range 0x800-0x89f has been reserved
[    0.208753] system 00:08: ioport range 0xb10-0xb1f has been reserved
[    0.208814] system 00:08: ioport range 0x900-0x90f has been reserved
[    0.208876] system 00:08: ioport range 0x910-0x91f has been reserved
[    0.208938] system 00:08: ioport range 0xfe00-0xfefe has been reserved
[    0.209000] system 00:08: iomem range 0xffb80000-0xffbfffff has been
reserved
[    0.209065] system 00:0c: ioport range 0x280-0x28f has been reserved
[    0.209126] system 00:0c: ioport range 0x290-0x29f has been reserved
[    0.209203] system 00:0d: iomem range 0xe0000000-0xefffffff has been
reserved
[    0.209267] system 00:0e: iomem range 0x0-0x9ffff could not be reserved
[    0.209329] system 00:0e: iomem range 0xc0000-0xcffff could not be reserved
[    0.209391] system 00:0e: iomem range 0xe0000-0xfffff could not be reserved
[    0.209454] system 00:0e: iomem range 0x100000-0xcfffffff could not be
reserved
[    0.209525] system 00:0e: iomem range 0xfec00000-0xffffffff could not be
reserved
[    0.214278] pci 0000:00:02.0: PCI bridge, secondary bus 0000:01
[    0.214342] pci 0000:00:02.0:   IO window: 0xc000-0xcfff
[    0.214403] pci 0000:00:02.0:   MEM window: 0xfa000000-0xfeafffff
[    0.214464] pci 0000:00:02.0:   PREFETCH window: 0xd0000000-0xdfffffff
[    0.214527] pci 0000:00:05.0: PCI bridge, secondary bus 0000:03
[    0.214589] pci 0000:00:05.0:   IO window: 0xe000-0xefff
[    0.214649] pci 0000:00:05.0:   MEM window: disabled
[    0.214709] pci 0000:00:05.0:   PREFETCH window: 0xf8f00000-0xf8ffffff
[    0.214772] pci 0000:00:14.4: PCI bridge, secondary bus 0000:02
[    0.214834] pci 0000:00:14.4:   IO window: 0xd000-0xdfff
[    0.214898] pci 0000:00:14.4:   MEM window: 0xfeb00000-0xfebfffff
[    0.214961] pci 0000:00:14.4:   PREFETCH window: disabled
[    0.215032] pci 0000:00:02.0: setting latency timer to 64
[    0.215036] pci 0000:00:05.0: setting latency timer to 64
[    0.215043] pci_bus 0000:00: resource 0 io:  [0x00-0xffff]
[    0.215045] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffffffffffff]
[    0.215047] pci_bus 0000:01: resource 0 io:  [0xc000-0xcfff]
[    0.215048] pci_bus 0000:01: resource 1 mem: [0xfa000000-0xfeafffff]
[    0.215050] pci_bus 0000:01: resource 2 pref mem [0xd0000000-0xdfffffff]
[    0.215052] pci_bus 0000:03: resource 0 io:  [0xe000-0xefff]
[    0.215053] pci_bus 0000:03: resource 2 pref mem [0xf8f00000-0xf8ffffff]
[    0.215055] pci_bus 0000:02: resource 0 io:  [0xd000-0xdfff]
[    0.215056] pci_bus 0000:02: resource 1 mem: [0xfeb00000-0xfebfffff]
[    0.215058] pci_bus 0000:02: resource 3 io:  [0x00-0xffff]
[    0.215059] pci_bus 0000:02: resource 4 mem: [0x000000-0xffffffffffffffff]
[    0.215083] NET: Registered protocol family 2
[    0.215305] IP route cache hash table entries: 262144 (order: 9, 2097152
bytes)
[    0.216472] TCP established hash table entries: 524288 (order: 11, 8388608
bytes)
[    0.219404] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[    0.219814] TCP: Hash tables configured (established 524288 bind 65536)
[    0.219876] TCP reno registered
[    0.220022] NET: Registered protocol family 1
[    0.220101]   alloc irq_desc for 16 on node 0
[    0.220103]   alloc kstat_irqs on node 0
[    0.220109] pci 0000:00:13.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[    0.276543] pci 0000:00:13.0: PCI INT A disabled
[    0.276617]   alloc irq_desc for 17 on node 0
[    0.276618]   alloc kstat_irqs on node 0
[    0.276624] pci 0000:00:13.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[    0.300546] pci 0000:00:13.1: PCI INT B disabled
[    0.300620]   alloc irq_desc for 18 on node 0
[    0.300621]   alloc kstat_irqs on node 0
[    0.300627] pci 0000:00:13.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[    0.324551] pci 0000:00:13.2: PCI INT C disabled
[    0.324624] pci 0000:00:13.3: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[    0.348552] pci 0000:00:13.3: PCI INT B disabled
[    0.348625] pci 0000:00:13.4: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[    0.372555] pci 0000:00:13.4: PCI INT C disabled
[    0.372632]   alloc irq_desc for 19 on node 0
[    0.372633]   alloc kstat_irqs on node 0
[    0.372639] pci 0000:00:13.5: PCI INT D -> GSI 19 (level, low) -> IRQ 19
[    0.372737] pci 0000:00:13.5: PCI INT D disabled
[    0.372817] pci 0000:01:00.0: Boot video device
[    0.372858] Unpacking initramfs...
[    0.530028] Freeing initrd memory: 10360k freed
[    0.533498] PCI-DMA: Disabling AGP.
[    0.533653] PCI-DMA: aperture base @ 20000000 size 65536 KB
[    0.533714] PCI-DMA: using GART IOMMU.
[    0.533775] PCI-DMA: Reserving 64MB of IOMMU area in the AGP aperture
[    0.535082] audit: initializing netlink socket (disabled)
[    0.535157] type=2000 audit(1389450675.532:1): initialized
[    0.537732] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[    0.538702] VFS: Disk quotas dquot_6.5.2
[    0.538798] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    0.538909] msgmni has been set to 16010
[    0.539157] alg: No test for stdrng (krng)
[    0.539278] Block layer SCSI generic (bsg) driver version 0.4 loaded (major
253)
[    0.539351] io scheduler noop registered
[    0.539410] io scheduler anticipatory registered
[    0.539469] io scheduler deadline registered
[    0.539561] io scheduler cfq registered (default)
[    0.539746]   alloc irq_desc for 24 on node 0
[    0.539749]   alloc kstat_irqs on node 0
[    0.539756] pcieport 0000:00:02.0: irq 24 for MSI/MSI-X
[    0.539761] pcieport 0000:00:02.0: setting latency timer to 64
[    0.539877]   alloc irq_desc for 25 on node 0
[    0.539878]   alloc kstat_irqs on node 0
[    0.539882] pcieport 0000:00:05.0: irq 25 for MSI/MSI-X
[    0.539885] pcieport 0000:00:05.0: setting latency timer to 64
[    0.540819] Linux agpgart interface v0.103
[    0.540908] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[    0.541073] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[    0.541416] 00:0b: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[    0.541568] input: Macintosh mouse button emulation as
/devices/virtual/input/input0
[    0.541675] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64
irq 1,12
[    0.544367] serio: i8042 KBD port at 0x60,0x64 irq 1
[    0.544432] serio: i8042 AUX port at 0x60,0x64 irq 12
[    0.544557] mice: PS/2 mouse device common for all mice
[    0.544646] rtc_cmos 00:02: RTC can wake from S4
[    0.544728] rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0
[    0.544814] rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
[    0.544882] cpuidle: using governor ladder
[    0.544941] cpuidle: using governor menu
[    0.545002] No iBFT detected.
[    0.545282] TCP cubic registered
[    0.545408] NET: Registered protocol family 10
[    0.545946] Mobile IPv6
[    0.546004] NET: Registered protocol family 17
[    0.546106] PM: Resume from disk failed.
[    0.546113] registered taskstats version 1
[    0.546474] rtc_cmos 00:02: setting system clock to 2014-01-11 14:31:15 UTC
(1389450675)
[    0.546572] Initalizing network drop monitor service
[    0.546659] Freeing unused kernel memory: 592k freed
[    0.546853] Write protecting the kernel read-only data: 4236k
[    0.571577] udev[86]: starting version 164
[    0.572355] input: AT Translated Set 2 keyboard as
/devices/platform/i8042/serio0/input/input1
[    0.641007] usbcore: registered new interface driver usbfs
[    0.641145] usbcore: registered new interface driver hub
[    0.641281] usbcore: registered new device driver usb
[    0.648243] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    0.648773] SCSI subsystem initialized
[    0.661314] ehci_hcd 0000:00:13.5: PCI INT D -> GSI 19 (level, low) -> IRQ
19
[    0.661416] ehci_hcd 0000:00:13.5: EHCI Host Controller
[    0.661499] ehci_hcd 0000:00:13.5: new USB bus registered, assigned bus
number 1
[    0.661594] ehci_hcd 0000:00:13.5: applying AMD SB600/SB700 USB freeze
workaround
[    0.661681] ehci_hcd 0000:00:13.5: debug port 1
[    0.661761] ehci_hcd 0000:00:13.5: irq 19, io mem 0xf9fff800
[    0.661833] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[    0.661907] r8169 0000:03:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[    0.661993] r8169 0000:03:00.0: setting latency timer to 64
[    0.662030]   alloc irq_desc for 26 on node 0
[    0.662032]   alloc kstat_irqs on node 0
[    0.662043] r8169 0000:03:00.0: irq 26 for MSI/MSI-X
[    0.662499] r8169 0000:03:00.0: eth0: RTL8168e/8111e at 0xffffc90000c50000,
00:25:22:85:f1:19, XID 0c200000 IRQ 26
[    0.662761] libata version 3.00 loaded.
[    0.663488] DC390: clustering now enabled by default. If you get problems
load
[    0.663562]        with "disable_clustering=1" and report to maintainers
[    0.665457]   alloc irq_desc for 22 on node 0
[    0.665458]   alloc kstat_irqs on node 0
[    0.665464] tmscsim 0000:02:07.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
[    1.293145] DC390_init: No EEPROM found! Trying default settings ...
[    1.293208] DC390: Used defaults: AdaptID=7, SpeedIdx=0 (10.0 MHz),
DevMode=0x1f, AdaptMode=0x2f, TaggedCmnds=3 (16), DelayReset=1s
[    1.293288] ehci_hcd 0000:00:13.5: USB 2.0 started, EHCI 1.00
[    1.297886] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[    1.297952] usb usb1: New USB device strings: Mfr=3, Product=2,
SerialNumber=1
[    1.298024] usb usb1: Product: EHCI Host Controller
[    1.298083] usb usb1: Manufacturer: Linux 2.6.32-5-amd64 ehci_hcd
[    1.298144] usb usb1: SerialNumber: 0000:00:13.5
[    1.298270] usb usb1: configuration #1 chosen from 1 choice
[    1.298352] hub 1-0:1.0: USB hub found
[    1.298416] hub 1-0:1.0: 10 ports detected
[    1.299584] scsi0 : Tekram DC390/AM53C974 V2.1d 2004-05-27
[    1.299613] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    1.299829] ahci 0000:00:12.0: version 3.0
[    1.299843] ahci 0000:00:12.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
[    1.299946] ahci 0000:00:12.0: controller can't do 64bit DMA, forcing 32bit
[    1.300107] ahci 0000:00:12.0: AHCI 0001.0100 32 slots 4 ports 3 Gbps 0xf
impl SATA mode
[    1.300181] ahci 0000:00:12.0: flags: ncq sntf ilck led clo pmp pio ccc 
[    1.300596] scsi1 : ahci
[    1.300810] scsi2 : ahci
[    1.300913] scsi3 : ahci
[    1.301007] scsi4 : ahci
[    1.301143] ata1: SATA max UDMA/133 abar m1024@0xf9fffc00 port 0xf9fffd00
irq 22
[    1.301217] ata2: SATA max UDMA/133 abar m1024@0xf9fffc00 port 0xf9fffd80
irq 22
[    1.301290] ata3: SATA max UDMA/133 abar m1024@0xf9fffc00 port 0xf9fffe00
irq 22
[    1.301363] ata4: SATA max UDMA/133 abar m1024@0xf9fffc00 port 0xf9fffe80
irq 22
[    1.301683] pata_atiixp 0000:00:14.1: PCI INT A -> GSI 16 (level, low) ->
IRQ 16
[    1.301791] pata_atiixp 0000:00:14.1: setting latency timer to 64
[    1.301915] scsi5 : pata_atiixp
[    1.302020] scsi6 : pata_atiixp
[    1.302901] ata5: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xff00 irq 14
[    1.302963] ata6: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xff08 irq 15
[    1.303095] ohci_hcd 0000:00:13.0: PCI INT A -> GSI 16 (level, low) -> IRQ
16
[    1.303184] ohci_hcd 0000:00:13.0: OHCI Host Controller
[    1.303255] ohci_hcd 0000:00:13.0: new USB bus registered, assigned bus
number 2
[    1.303350] ohci_hcd 0000:00:13.0: irq 16, io mem 0xf9ffe000
[    1.364036] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
[    1.364101] usb usb2: New USB device strings: Mfr=3, Product=2,
SerialNumber=1
[    1.364172] usb usb2: Product: OHCI Host Controller
[    1.364232] usb usb2: Manufacturer: Linux 2.6.32-5-amd64 ohci_hcd
[    1.364293] usb usb2: SerialNumber: 0000:00:13.0
[    1.364433] usb usb2: configuration #1 chosen from 1 choice
[    1.364515] hub 2-0:1.0: USB hub found
[    1.364584] hub 2-0:1.0: 2 ports detected
[    1.364752] ohci_hcd 0000:00:13.1: PCI INT B -> GSI 17 (level, low) -> IRQ
17
[    1.364837] ohci_hcd 0000:00:13.1: OHCI Host Controller
[    1.364904] ohci_hcd 0000:00:13.1: new USB bus registered, assigned bus
number 3
[    1.364997] ohci_hcd 0000:00:13.1: irq 17, io mem 0xf9ffd000
[    1.428034] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
[    1.428099] usb usb3: New USB device strings: Mfr=3, Product=2,
SerialNumber=1
[    1.428171] usb usb3: Product: OHCI Host Controller
[    1.428230] usb usb3: Manufacturer: Linux 2.6.32-5-amd64 ohci_hcd
[    1.428291] usb usb3: SerialNumber: 0000:00:13.1
[    1.428435] usb usb3: configuration #1 chosen from 1 choice
[    1.428516] hub 3-0:1.0: USB hub found
[    1.428583] hub 3-0:1.0: 2 ports detected
[    1.428749] ohci_hcd 0000:00:13.2: PCI INT C -> GSI 18 (level, low) -> IRQ
18
[    1.428834] ohci_hcd 0000:00:13.2: OHCI Host Controller
[    1.428900] ohci_hcd 0000:00:13.2: new USB bus registered, assigned bus
number 4
[    1.428994] ohci_hcd 0000:00:13.2: irq 18, io mem 0xf9ffc000
[    1.465538] ata5.00: ATAPI: TOSHIBA DVD-ROM SD-M1912, TM01, max UDMA/33
[    1.465624] ata5.01: ATAPI: LS-120 COSM   04              UHD Floppy,
0270M09T, max PIO2
[    1.473033] ata5.00: configured for UDMA/33
[    1.492530] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
[    1.492558] ata5.01: configured for PIO2
[    1.492683] usb usb4: New USB device strings: Mfr=3, Product=2,
SerialNumber=1
[    1.492754] usb usb4: Product: OHCI Host Controller
[    1.492829] usb usb4: Manufacturer: Linux 2.6.32-5-amd64 ohci_hcd
[    1.492908] usb usb4: SerialNumber: 0000:00:13.2
[    1.493058] usb usb4: configuration #1 chosen from 1 choice
[    1.493186] hub 4-0:1.0: USB hub found
[    1.493256] hub 4-0:1.0: 2 ports detected
[    1.493433] ohci_hcd 0000:00:13.3: PCI INT B -> GSI 17 (level, low) -> IRQ
17
[    1.493535] ohci_hcd 0000:00:13.3: OHCI Host Controller
[    1.493625] ohci_hcd 0000:00:13.3: new USB bus registered, assigned bus
number 5
[    1.493710] ohci_hcd 0000:00:13.3: irq 17, io mem 0xf9ffb000
[    1.556041] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
[    1.556105] usb usb5: New USB device strings: Mfr=3, Product=2,
SerialNumber=1
[    1.556177] usb usb5: Product: OHCI Host Controller
[    1.556236] usb usb5: Manufacturer: Linux 2.6.32-5-amd64 ohci_hcd
[    1.556297] usb usb5: SerialNumber: 0000:00:13.3
[    1.556436] usb usb5: configuration #1 chosen from 1 choice
[    1.556518] hub 5-0:1.0: USB hub found
[    1.556586] hub 5-0:1.0: 2 ports detected
[    1.556749] ohci_hcd 0000:00:13.4: PCI INT C -> GSI 18 (level, low) -> IRQ
18
[    1.556834] ohci_hcd 0000:00:13.4: OHCI Host Controller
[    1.556901] ohci_hcd 0000:00:13.4: new USB bus registered, assigned bus
number 6
[    1.556986] ohci_hcd 0000:00:13.4: irq 18, io mem 0xf9ffa000
[    1.608377] usb 1-5: new high speed USB device using ehci_hcd and address 2
[    1.620037] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
[    1.620101] usb usb6: New USB device strings: Mfr=3, Product=2,
SerialNumber=1
[    1.620173] usb usb6: Product: OHCI Host Controller
[    1.620233] usb usb6: Manufacturer: Linux 2.6.32-5-amd64 ohci_hcd
[    1.620294] usb usb6: SerialNumber: 0000:00:13.4
[    1.620387] ata3: SATA link down (SStatus 0 SControl 300)
[    1.620487] ata4: SATA link down (SStatus 0 SControl 300)
[    1.620488] usb usb6: configuration #1 chosen from 1 choice
[    1.620529] hub 6-0:1.0: USB hub found
[    1.620540] hub 6-0:1.0: 2 ports detected
[    1.624083] ata2: SATA link down (SStatus 0 SControl 300)
[    1.742061] usb 1-5: New USB device found, idVendor=05e3, idProduct=0608
[    1.742126] usb 1-5: New USB device strings: Mfr=0, Product=1,
SerialNumber=0
[    1.742189] usb 1-5: Product: USB2.0 Hub
[    1.742330] usb 1-5: configuration #1 chosen from 1 choice
[    1.742720] hub 1-5:1.0: USB hub found
[    1.743053] hub 1-5:1.0: 4 ports detected
[    1.788032] ata1: softreset failed (device not ready)
[    1.788096] ata1: applying SB600 PMP SRST workaround and retrying
[    1.952046] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[    1.954513] ata1.00: ATA-8: WDC WD10EARS-003BB1, 80.00A80, max UDMA/133
[    1.954578] ata1.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 31/32),
AA
[    1.954664] ata1.00: SB600 AHCI: limiting to 255 sectors per cmd
[    1.956915] ata1.00: SB600 AHCI: limiting to 255 sectors per cmd
[    1.956980] ata1.00: configured for UDMA/133
[    1.957069] scsi: waiting for bus probes to complete ...
[    2.016648] usb 1-5.1: new low speed USB device using ehci_hcd and address 3
[    2.112797] usb 1-5.1: New USB device found, idVendor=046d, idProduct=c016
[    2.112863] usb 1-5.1: New USB device strings: Mfr=1, Product=2,
SerialNumber=0
[    2.112934] usb 1-5.1: Product: Optical USB Mouse
[    2.112994] usb 1-5.1: Manufacturer: Logitech
[    2.113132] usb 1-5.1: configuration #1 chosen from 1 choice
[    2.184697] usb 1-5.2: new high speed USB device using ehci_hcd and address
4
[    2.278971] usb 1-5.2: New USB device found, idVendor=0c45, idProduct=624e
[    2.279037] usb 1-5.2: New USB device strings: Mfr=0, Product=1,
SerialNumber=0
[    2.279108] usb 1-5.2: Product: USB20 Camera    
[    2.279251] usb 1-5.2: configuration #1 chosen from 1 choice
[    4.460415] scsi 1:0:0:0: Direct-Access     ATA      WDC WD10EARS-003 80.0
PQ: 0 ANSI: 5
[    4.461280] scsi 5:0:0:0: CD-ROM            TOSHIBA  DVD-ROM SD-M1912 TM01
PQ: 0 ANSI: 5
[    4.471844] scsi 5:0:1:0: Direct-Access     MATSHITA LS-120 COSM   04 0270
PQ: 0 ANSI: 5
[    4.629895] usbcore: registered new interface driver hiddev
[    4.631113] sd 1:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00
TB/931 GiB)
[    4.631217] sd 1:0:0:0: [sda] Write Protect is off
[    4.631277] sd 1:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    4.631291] sd 1:0:0:0: [sda] Write cache: enabled, read cache: enabled,
doesn't support DPO or FUA
[    4.631445]  sda:
[    4.631935] input: Logitech Optical USB Mouse as
/devices/pci0000:00/0000:00:13.5/usb1/1-5/1-5.1/1-5.1:1.0/input/input2
[    4.632200] generic-usb 0003:046D:C016.0001: input,hidraw0: USB HID v1.10
Mouse [Logitech Optical USB Mouse] on usb-0000:00:13.5-5.1/input0
[    4.632307] usbcore: registered new interface driver usbhid
[    4.632369] usbhid: v2.6:USB HID core driver
[    4.635642] sd 5:0:1:0: [sdb] Attached SCSI removable disk
[    4.639592]  sda1 sda2 sda3 sda4
[    4.640067] sd 1:0:0:0: [sda] Attached SCSI disk
[    4.644038] sr0: scsi3-mmc drive: 1x/48x cd/rw xa/form2 cdda tray
[    4.644103] Uniform CD-ROM driver Revision: 3.20
[    4.644255] sr 5:0:0:0: Attached scsi CD-ROM sr0
[    4.647776] sd 1:0:0:0: Attached scsi generic sg0 type 0
[    4.648009] sr 5:0:0:0: Attached scsi generic sg1 type 5
[    4.648215] sd 5:0:1:0: Attached scsi generic sg2 type 0
[    4.883830] md: raid1 personality registered for level 1
[    4.887033] mdadm: sending ioctl 1261 to a partition!
[    4.887105] mdadm: sending ioctl 1261 to a partition!
[    4.887345] mdadm: sending ioctl 1261 to a partition!
[    4.887407] mdadm: sending ioctl 1261 to a partition!
[    4.892149] mdadm: sending ioctl 1261 to a partition!
[    4.892211] mdadm: sending ioctl 1261 to a partition!
[    4.894831] mdadm: sending ioctl 1261 to a partition!
[    4.894894] mdadm: sending ioctl 1261 to a partition!
[    4.895160] mdadm: sending ioctl 800c0910 to a partition!
[    4.895224] mdadm: sending ioctl 800c0910 to a partition!
[    4.899003] md: md0 stopped.
[    4.899930] md: bind<sda2>
[    4.900923] raid1: raid set md0 active with 1 out of 2 mirrors
[    4.901002] md0: detected capacity change from 0 to 7679901696
[    4.902378]  md0:
[    4.917590] md: md1 stopped.
[    4.918306] md: bind<sda3>
[    4.919311] raid1: raid set md1 active with 1 out of 2 mirrors
[    4.919402] md1: detected capacity change from 0 to 2047934464
[    4.920367]  md1: unknown partition table
[    4.931628] md: md2 stopped.
[    4.932398] md: bind<sda4>
[    4.933774] raid1: raid set md2 active with 1 out of 2 mirrors
[    4.933869] md2: detected capacity change from 0 to 990476763136
[    4.934892]  md2: unknown partition table
[    4.940902] device-mapper: uevent: version 1.0.3
[    4.941245] device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised:
dm-de...@redhat.com
[    5.163998] kjournald starting.  Commit interval 5 seconds
[    5.164009] EXT3-fs: mounted filesystem with ordered data mode.
[    6.155804] fuse init (API version 7.13)
[    6.526364] udev[552]: starting version 164
[    6.965415] ACPI: duty_cycle spans bit 4
[    6.965506] processor LNXCPU:00: registered as cooling_device0
[    6.965603] processor LNXCPU:01: registered as cooling_device1
[    6.968559] input: PC Speaker as /devices/platform/pcspkr/input/input3
[    6.970048] input: Power Button as
/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input4
[    6.970127] ACPI: Power Button [PWRB]
[    6.970229] input: Power Button as
/devices/LNXSYSTM:00/LNXPWRBN:00/input/input5
[    6.970301] ACPI: Power Button [PWRF]
[    7.016530] parport_pc 00:05: reported by Plug and Play ACPI
[    7.016674] parport0: PC-style at 0x378 (0x778), irq 7 [PCSPP,TRISTATE]
[    7.019528] EDAC MC: Ver: 2.1.0 Sep 23 2013
[    7.026136] EDAC amd64_edac:  Ver: 3.2.0 Sep 23 2013
[    7.026329] EDAC amd64: This node reports that Memory ECC is currently
disabled, set F3x44[22] (0000:00:18.3).
[    7.026418] EDAC amd64: ECC disabled in the BIOS or no ECC capability,
module will not load.
[    7.026419]  Either enable ECC checking or force module loading by setting
'ecc_enable_override'.
[    7.026420]  (Note that use of the override may cause unknown side effects.)
[    7.026654] amd64_edac: probe of 0000:00:18.2 failed with error -22
[    7.596933] input: ImPS/2 Logitech Wheel Mouse as
/devices/platform/i8042/serio1/input/input6
[    8.338443] nvidia: module license 'NVIDIA' taints kernel.
[    8.338508] Disabling lock debugging due to kernel taint
[    8.613296] Linux video capture interface: v2.00
[    8.635270] gspca: main v2.7.0 registered
[    8.636563] gspca: probing 0c45:624e
[    8.636941] input: SN9C20X Webcam as
/devices/pci0000:00/0000:00:13.5/usb1/1-5/1-5.2/input/input7
[    8.676975] sn9c20x: SOI968 sensor detected
[    8.677101] gspca: probe ok
[    8.677172] usbcore: registered new interface driver sn9c20x
[    8.677234] sn9c20x: registered
[    8.832016] piix4_smbus 0000:00:14.0: SMBus Host Controller at 0xb00,
revision 0
[    8.832156] nvidia 0000:01:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[    8.832223] nvidia 0000:01:00.0: setting latency timer to 64
[    8.832227] vgaarb: device changed decodes:
PCI:0000:01:00.0,olddecodes=io+mem,decodes=none:owns=io+mem
[    8.832468] NVRM: loading NVIDIA UNIX x86_64 Kernel Module  195.36.31  Thu
Jun  3 08:19:50 PDT 2010
[    8.898603] HDA Intel 0000:00:14.2: PCI INT A -> GSI 16 (level, low) -> IRQ
16
[    9.836609] EXT3 FS on md0, internal journal
[    9.926688] loop: module loaded
[    9.971260] __ratelimit: 162 callbacks suppressed
[    9.971323] mdadm: sending ioctl 800c0910 to a partition!
[    9.971384] mdadm: sending ioctl 800c0910 to a partition!
[    9.971541] mdadm: sending ioctl 800c0910 to a partition!
[    9.971601] mdadm: sending ioctl 800c0910 to a partition!
[    9.973911] mdadm: sending ioctl 800c0910 to a partition!
[    9.973975] mdadm: sending ioctl 800c0910 to a partition!
[    9.974047] mdadm: sending ioctl 800c0910 to a partition!
[    9.974108] mdadm: sending ioctl 800c0910 to a partition!
[    9.976514] mdadm: sending ioctl 800c0910 to a partition!
[    9.976578] mdadm: sending ioctl 800c0910 to a partition!
[   25.909381] padlock: VIA PadLock not detected.
[   25.926010] padlock: VIA PadLock Hash Engine not detected.
[   36.284333] REISERFS (device md1): found reiserfs format "3.6" with standard
journal
[   36.284444] REISERFS (device md1): using ordered data mode
[   36.296869] REISERFS (device md1): journal params: device md1, size 8192,
journal first block 18, max trans len 1024, max batch 900, max commit age 30,
max trans age 30
[   36.297549] REISERFS (device md1): checking transaction log (md1)
[   36.359524] REISERFS (device md1): Using r5 hash to sort names
[   36.633436] kjournald starting.  Commit interval 5 seconds
[   36.676957] EXT3 FS on dm-2, internal journal
[   36.677067] EXT3-fs: mounted filesystem with ordered data mode.
[   36.795086] kjournald starting.  Commit interval 5 seconds
[   36.796597] EXT3 FS on dm-3, internal journal
[   36.796707] EXT3-fs: mounted filesystem with ordered data mode.
[   38.650259] Adding 1048568k swap on /mnt/home+data/tmp/swap.  Priority:-1
extents:285 across:1250848k 
[   39.187204] ip6_tables: (C) 2000-2006 Netfilter Core Team
[   40.154188] tun: Universal TUN/TAP device driver, 1.6
[   40.154260] tun: (C) 1999-2004 Max Krasnyansky <m...@qualcomm.com>
[   40.212418] Bridge firewalling registered
[   40.219354] device eth0 entered promiscuous mode
[   40.220517] r8169 0000:03:00.0: firmware: requesting rtl_nic/rtl8168e-2.fw
[   40.507891] r8169 0000:03:00.0: eth0: link down
[   40.507959] r8169 0000:03:00.0: eth0: link down
[   40.509052] ADDRCONF(NETDEV_UP): eth0: link is not ready
[   40.510978] device qemu-7eggert entered promiscuous mode
[   40.514567] br0: port 2(qemu-7eggert) entering learning state
[   42.534336] r8169 0000:03:00.0: eth0: link up
[   42.535312] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[   42.536107] br0: port 1(eth0) entering learning state
[   50.660028] qemu-7eggert: no IPv6 routers present
[   50.764025] br0: no IPv6 routers present
[   53.074379] RPC: Registered udp transport module.
[   53.074382] RPC: Registered tcp transport module.
[   53.074383] RPC: Registered tcp NFSv4.1 backchannel transport module.
[   53.126367] Slow work thread pool: Starting up
[   53.126404] Slow work thread pool: Ready
[   53.126462] FS-Cache: Loaded
[   53.183742] FS-Cache: Netfs 'nfs' registered for caching
[   53.229626] Installing knfsd (copyright (C) 1996 o...@monad.swb.de).
[   53.236354] eth0: no IPv6 routers present
[   55.512021] br0: port 2(qemu-7eggert) entering forwarding state
[   57.532023] br0: port 1(eth0) entering forwarding state
[   58.473636] svc: failed to register lockdv1 RPC service (errno 97).
[   61.251794] kvm: Nested Virtualization enabled
[   61.251796] kvm: Nested Paging enabled
[   61.367020] vboxdrv: Found 2 processor cores.
[   61.367079] VBoxDrv: dbg - g_abExecMemory=ffffffffa0f189a0
[   61.367103] vboxdrv: fAsync=0 offMin=0x3f1 offMax=0x9a0
[   61.367144] vboxdrv: TSC mode is 'synchronous', kernel timer mode is
'normal'.
[   61.367146] vboxdrv: Successfully loaded version 4.0.10_Debian (interface
0x00180000).
[   61.776140] NFSD: Using /var/lib/nfs/v4recovery as the NFSv4 state recovery
directory
[   61.776165] NFSD: starting 90-second grace period
[   74.513490] lp0: using parport0 (interrupt-driven).
[   74.516714] ppdev: user-space parallel port driver
[   83.415580] lirc_dev: IR Remote Control driver registered, major 61 
[   83.590882] powernow-k8: Found 1 AMD Athlon(tm) II X2 250 Processor
processors (2 cpu cores) (version 2.20.00)
[   83.590921] powernow-k8:    0 : pstate 0 (3000 MHz)
[   83.590922] powernow-k8:    1 : pstate 1 (2300 MHz)
[   83.590924] powernow-k8:    2 : pstate 2 (1800 MHz)
[   83.590925] powernow-k8:    3 : pstate 3 (800 MHz)
[   83.944393] lirc_serial: auto-detected active high receiver
[   83.944403] lirc_dev: lirc_register_plugin: sample_rate: 0

-- 
You are receiving this mail because:
You are watching the assignee of the bug.

------------------------------------------------------------------------------
CenturyLink Cloud: The Leader in Enterprise Cloud Services.
Learn Why More Businesses Are Choosing CenturyLink Cloud For
Critical Workloads, Development Environments & Everything In Between.
Get a Quote or Start a Free Trial Today. 
http://pubads.g.doubleclick.net/gampad/clk?id=119420431&iu=/4140/ostg.clktrk
_______________________________________________
acpi-bugzilla mailing list
acpi-bugzilla@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/acpi-bugzilla

Reply via email to