https://bugzilla.kernel.org/show_bug.cgi?id=222276

            Bug ID: 222276
           Summary: Built-in PS/2 keyboard (i8042) does not wake system
                    from s2idle on AMD Strix Point
           Product: ACPI
           Version: 2.5
          Hardware: AMD
                OS: Linux
            Status: NEW
          Severity: normal
          Priority: P3
         Component: Power-Sleep-Wake
          Assignee: [email protected]
          Reporter: [email protected]
        Regression: No

```
Component: ACPI

Hardware: x86_64, AMD Ryzen AI 9 H 365, Lenovo XiaoXinPro 14 ASP10 (83LR)

Kernel: 7.4.0-0.rc2.261111g067c5c24cef2.21.fc46.x86_64 (Fedora 46 Workstation
Prerelease)

Distribution: Fedora 46

The built-in keyboard does not wake the system from s2idle suspend. Only the
touchpad wakes it. Suspend/resume itself works correctly (resume devices took
about 1 s, no hang).

DMI:

sys_vendor: LENOVO

product_name: 83LR

product_version: XiaoXinPro 14 ASP10

board_name: LNVNB161216

bios_version: QKCN29WW (12/23/2025)

lspci -nn:

00:14.3 ISA bridge [0601]: AMD FCH LPC Bridge [1022:790e] (rev 51)

00:14.0 SMBus [0c05]: AMD FCH SMBus Controller [1022:790b] (rev 71)

Boot log:

i8042: PNP: PS/2 Controller [PNP0303:KBC0] at 0x60,0x64 irq 1

serio: i8042 KBD port at 0x60,0x64 irq 1

input: AT Translated Set 2 keyboard as
/devices/platform/i8042/serio0/input/input2

Reproducer:

1. Suspend to s2idle.

2. Press any key on the built-in keyboard — nothing happens.

3. Click or tap the touchpad — system wakes.

Expected: the built-in keyboard should wake the system from s2idle, like the
touchpad.

Analysis:

The built-in keyboard is an AT Translated Set 2 keyboard on the i8042
controller (serio0, irq 1).

/sys/bus/serio/devices/serio0/power/wakeup reports enabled.

However the i8042 controller itself has no wakeup capability:

/sys/devices/platform/i8042/power/wakeup does not exist.

/proc/acpi/wakeup contains no PS2K entry, so the PS/2 controller is not wired
to any ACPI GPE.

The touchpad (i2c SYNA2BA6, on the ITE8353 EC) does wake, because it is on a
live EC GPE.

So the PS/2 keyboard has no wakeup GPE and cannot wake the system from s2idle.

/proc/acpi/wakeup (full):

GPP0  S4  enabled  pci:0000:00:01.1

GPP1  S4  enabled  pci:0000:00:01.2

GPP3  S4  enabled  pci:0000:00:02.1

GPP5  S0  enabled  pci:0000:00:02.3

GP10  S4  enabled  pci:0000:00:03.2

XHC1  S0  enabled  pci:0000:c3:00.4

GPPC  S0  enabled  pci:0000:00:08.3

XHC0  S0  enabled  pci:0000:c5:00.0

XHC3  S0  enabled  pci:0000:c5:00.3

XHC4  S0  enabled  pci:0000:c5:00.4

NHI0  S4  enabled  pci:0000:c5:00.5

NHI1  S4  enabled  pci:0000:c5:00.6

Note: there is no PS2K / i8042 entry in the wakeup table.
```

-- 
You are receiving this mail because:
You are watching the assignee of the bug.

_______________________________________________
acpi-bugzilla mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/acpi-bugzilla

Reply via email to