V12.3HF5 WS2003SE A4D v5.0r37 If you are having difficulty with the HTTP/S Port publishing or the IP Address 4D listens to, I suggest that you change the path to your structure file.
My path was C:\AppName\AppName.4db, very short. I was not able to get my structure to publish on 443 using the user interface or the SET DATABASE PARAMETER command, until I changed the path to the database, then my changes worked and the database published on the intended port. The database was publishing before, but not on the ports/IP Address I required. Something occurs in 4D and the structure remembers which port/IP Address it was using, and this information sticks, even when moving the structure to a different box. But when I changed the path on the new box, updates to the port/IP Address worked again. I am suspicious that after having worked on the 4D structure on my development box, 4D is holding onto some piece of information from my box's environment that is causing the failure. I have seen this new behavior occur with 4D's listen-to IP address, ports, and the default web folder. Hth! David Ringsmuth _______________________________________________ Active4D-dev mailing list [email protected] http://list.aparajitaworld.com/listinfo/active4d-dev Archives: http://vasudev.aparajitaworld.com/archive/active4d-dev/
