Hi, you can also look at [1], maybe this helps? Cheers
[1] http://ruedigergad.com/2012/12/21/plasma-active-for-nexus-7-running-the-touch-optimized-plasma-active-linux-distribution-on-nexus-7/ On Thu, Sep 5, 2013 at 3:15 AM, Matthias Raives <[email protected]> wrote: > Neither tutorial has worked; both give me the same (aparent) problem. > > > On Tue, Sep 3, 2013 at 12:24 PM, Matthias Raives <[email protected]> > wrote: >> >> It seems the primary difference is that the tutorial you linked has me >> erase the boot and userdata partitions before flashing MOSLO onto my device. >> I could imagine the former helping, but I don't see why I would need to >> erase the userdata partition (it should be erased upon unlocking the >> bootloader anyways). >> >> In any case, I was assuming the problem was due to the fact that I was >> using a newer model of the Nexus 7. Can you confirm/deny this assumption? >> >> I will try following your tutorial in the near future, and will respond >> with the results >> >> >> On Tue, Sep 3, 2013 at 2:43 AM, Éibhear <[email protected]> wrote: >>> >>> >>> Matthias Raives wrote: >>> > Hello, >>> > >>> > I recently posted this question to the Plasma Active forums ( >>> > >>> > http://forum.kde.org/viewtopic.php?f=211&t=117311&sid=97ffd4496f9b20f2e0cc88d6214ab8ed), >>> > ans was told to ask here. I've been trying to flash my Nexus 7 with >>> > Plasma >>> > Active using this >>> > >>> > tutorial<https://wiki.merproject.org/wiki/Community_Workspace/Tegra3/Nexus7/PA_installation>. >>> > I get to the step where I flash MOSLO onto my device: >>> > >>> > >>> > sudo fastboot -c "ro console=tty1 rootwait rootfstype=ext4" flash:raw >>> > boot >>> > zImage-moslo initrd-moslo >>> > >>> > My computer reports a success, but when I press the power button to >>> > boot >>> > my >>> > Nexus 7 into MOSLO, it hangs on a screen showing the Google logo and a >>> > lock >>> > symbol. I don't know what the screen should look like when I've >>> > successfully booted into MOSLO, but even if this were the correct >>> > screen, >>> > MOSLO isn't exporting the userdata partition to a USB storage device. >>> > >>> > More information: >>> > >>> > I am using >>> > the MOLSO 0.0.15.3 tarball from >>> > http://files.kde.org/plasma/active/3.0/images/nexus7/ >>> > , and m >>> > y Nexus 7 is the 32GB 2013 model. >>> > >>> > (On a related note, would I be better off trying to install >>> > Ubuntu/Kubuntu on my device and then install PA from there?) >>> > >>> > >>> > Thank >>> > s, >>> > >>> > Matthias Raives >>> > _______________________________________________ >>> > Active mailing list >>> > [email protected] >>> > https://mail.kde.org/mailman/listinfo/active >>> > >>> >>> Hi, >>> >>> It's a long number of months since I did this, but following the steps at >>> http://www.muktware.com/5239/how-install-kde-plasma-active-nexus-7 worked >>> for me. >>> >>> On a quick glance, the two sets of instructions seem similar, but perhaps >>> there's something subtle in the difference. >>> >>> Éibhear >>> >>> >>> -- >>> Éibhear Ó hAnluain >>> Gibiris.org >>> Dublin >>> Ireland >>> >> > > > _______________________________________________ > Active mailing list > [email protected] > https://mail.kde.org/mailman/listinfo/active > _______________________________________________ Active mailing list [email protected] https://mail.kde.org/mailman/listinfo/active
