The best way to solve this problem is using a VPN tunnel ... You will need
to open 1 port only this way.
A lot of ports have to be opened otherwise.
Good luck
-----Oorspronkelijk bericht-----
Van: Amit Zinman [mailto:[EMAIL PROTECTED]]
Verzonden: maandag 30 juli 2001 16:26
Aan: [EMAIL PROTECTED]
Onderwerp: [ActiveDir] Installing a DC through a firewall
Hi,
Does anyone know which ports I need to open to add a DC through a firewall
between two branches?
Amit
================================================
De informatie opgenomen in dit bericht kan vertrouwelijk zijn en
is uitsluitend bestemd voor de geadresseerde. Indien u dit bericht
onterecht ontvangt, wordt u verzocht de inhoud niet te gebruiken en
de afzender direct te informeren door het bericht te retourneren.
================================================
The information contained in this message may be confidential
and is intended to be exclusively for the addressee. Should you
receive this message unintentionally, please do not use the contents
herein and notify the sender immediately by return e-mail.
List info: http://www.activedir.org/mail_list.htm
List archive: http://www.mail-archive.com/activedir%40mail.activedir.org/
