Yeah, yeah - would be like you to jump in and take the EASY one! How goes, Dean?
Drop me a note - mailto:[EMAIL PROTECTED] Rick Kingslan - Microsoft Certified Trainer MCSE+I on Windows NT 4.0 MCSE on Windows 2000 MVP [Windows NT/2000 Server] "Any sufficiently advanced technology is indistinguishable from magic." --- Arthur C. Clarke -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]] On Behalf Of Dean Wells Sent: Thursday, January 17, 2002 7:37 AM To: [EMAIL PROTECTED] Subject: RE: [ActiveDir] RPC Server weird error Not to steal Rick's thunder ... but ... I will :) All that stuff is simply nslookup attempting to show you the name of your DNS server by performing a reverse lookup against the name servers IP address. Since no corresponding reverse lookup zone exists (at least within resolution range), it errors - it's a pain but that's the way it is and has been for years. HTH Dean -- Dean Wells, MVP MSEtechnology * Tel: +1 (954) 501-4307 * Email: [EMAIL PROTECTED] http://msetechnology.com -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On Behalf Of Andy Ward Sent: Thursday, January 17, 2002 8:31 AM To: [EMAIL PROTECTED] Subject: RE: [ActiveDir] RPC Server weird error Rick, I have discovered and fixed the problem.............. the 4 zones were configured at the same level as the domain name in the DNS, rather than below it. Although they were being updated by the DNS server, it wasn't working quite right. Following your advice, I deleted those 4 zones, and stop/started the Netlogon service. Ta da! The 4 zones showed up again, but this time nested below the domain name. No Userenv errors yet! One final thing, if you know - when I do an nslookup from any of the workstations, it says the following: e.g. nslookup www.google.com <http://www.google.com> DNS request timed out. timeout was 2 seconds. ***Can't find server name for address 192.168.1.200: Timed out *** Default servers are not available Server: UnKnown Address: 192.168.1.200 DNS request timed out. timeout was 2 seconds. Non-authoritative answer: Name: www.google.com <http://www.google.com> Address: 216.239.39.101 So, it does resolve the name properly - but what is all that stuff about not finding server name for address? Have I not configured a name for the DNS? If so, how do I do that? Thanks for all your help so far! Andy -----Original Message----- From: Rick Kingslan [mailto:[EMAIL PROTECTED]] Sent: 17 January 2002 00:47 To: [EMAIL PROTECTED] Subject: RE: [ActiveDir] RPC Server weird error Andy, I'd run DCDiag - all options. This ought to turn something up. You might also consider nltest (NLTEST). This is most likely a DNS issue. Make sure that the 4 zones are configured and available below your domain name in DNS. You should find _sites, _msdcs, _tcp, and _udp. This is where the SRV (Service Locator Records) are going to live. If they are not all there, make sure that you have Dynamic Updates set to 'yes' or 'Secure Updates', then stop and start the netlogon service. And, to answer your question, RPC server is the process that is responsible for all the essential communications on a Windows NT platform - workstation or server - internal or external. It's the Remote Procedure Call services. Feel free to send your DCDIAG or NLTEST logs to me and I'll help you decipher what's what. Hope this helps.... Rick Kingslan - Microsoft Certified Trainer MCSE+I on Windows NT 4.0 MCSE on Windows 2000 MVP [Windows NT/2000 Server] m <mailto:[EMAIL PROTECTED]> ailto:[EMAIL PROTECTED] "Any sufficiently advanced technology is indistinguishable from magic." --- Arthur C. Clarke -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]] On Behalf Of Andy Ward (GCS) Sent: Wednesday, January 16, 2002 6:40 PM To: [EMAIL PROTECTED] Subject: Re: [ActiveDir] RPC Server weird error Hi Chris, They can all ping the DNS server, and as far as I am aware can all use it - I assume this based on the fact that the only DNS server they have in their LAN config is the internal one, and they can all browse the web with no problems. Any suggestions on how I might check if they are using the full functionality of the DNS server, or something like that? Andy ----- Original Message ----- From: Christopher <mailto:[EMAIL PROTECTED]> Hummert To: [EMAIL PROTECTED] <mailto:[EMAIL PROTECTED]> Sent: Thursday, January 17, 2002 12:28 AM Subject: RE: [ActiveDir] RPC Server weird error I had this exact same problem......make sure that the clients can see and are using the DNS server. -Chris -----Original Message----- From: [EMAIL PROTECTED] <mailto:[EMAIL PROTECTED]> [mailto:[EMAIL PROTECTED]] On Behalf Of Andy Ward (GCS) Sent: Wednesday, January 16, 2002 4:29 PM To: [EMAIL PROTECTED] <mailto:[EMAIL PROTECTED]> Subject: [ActiveDir] RPC Server weird error Hi all, I am experiencing a weird, recurring problem on all 12 of the Windows 2000 Professional (SP2) workstations at one of my client's offices. Approximately every half-hour to hour, each workstation will log the following error in the Application event log: e.g. Source: Userenv Category: None Type: Error Event ID: 1000 User: NT AUTHORITY\SYSTEM Computer: FLUMP Description: Windows cannot determine the user or computer name. Return value (1722). I did the obvious NET HELPMSG 1722 and it tells me that 'The RPC Server is unavailable'. I have also looked all over the web for ways to fix this problem, and can't find any. They all seem to give me really unuseful information, like 'Make sure your DNS is configured properly' and other such useful tidbits. I am really lost here! None of the workstations experience any problems, whatsoever. They all work fine, log on fine, use Exchange fine, register in the DNS fine etc etc, can browse the network and web. They all work fine. BUT I can't get rid of this error message, which just keeps on showing up. The client is convinced something bad will happen, and I just need, for my own peace of mind, to solve this one - and the web has turned out to be useless for tracking down a resolution. BTW, the server is Small Business Server 2000 (SP2) and is experiencing no problems. Thanks all in advance, I would be really grateful if someone could shed some light on this one! Andy Ward MCP (Exchange 2000) GCS PS What the hell IS an RPC server anyway? List info : http://www.activedir.org/mail_list.htm List FAQ : http://www.activedir.org/list_faq.htm List archive: http://www.mail-archive.com/activedir%40mail.activedir.org/ List info : http://www.activedir.org/mail_list.htm List FAQ : http://www.activedir.org/list_faq.htm List archive: http://www.mail-archive.com/activedir%40mail.activedir.org/ List info : http://www.activedir.org/mail_list.htm List FAQ : http://www.activedir.org/list_faq.htm List archive: http://www.mail-archive.com/activedir%40mail.activedir.org/
