RE: [ActiveDir] NTLDR Not Found

[Juan Ibarra]

Title: Message

No, I have verified with Compaq that is not the controller.  When in there and saw all the drives listed by using the Smart Start CD.

Tried Fixboot and nothing,  I am going to try FIXMBR next.

 

Any other suggestions?

 

Thanks,

Juan

-----Original Message-----
From: Mulnick, Al [mailto:[EMAIL PROTECTED]
Sent: Monday, September 22, 2003 11:45 AM
To: '[EMAIL PROTECTED]'
Subject: RE: [ActiveDir] NTLDR Not Found

and does it work when you remap to partition 3?

 

 

-----Original Message-----
From: Juan Ibarra [mailto:[EMAIL PROTECTED]
Sent: Monday, September 22, 2003 10:37 AM
To: '[EMAIL PROTECTED]'
Subject: RE: [ActiveDir] NTLDR Not Found

If I boot off the CD using the recovery console.  I type Map and see this.

 

?    10MB        Disk0\partition1

m    1024MB    Disk0\partition2

n     1700MB    Disk0\partition3  (winnt partition)

a

D    (Cd rom)

 

I created a boot.ini file and pointed to partition 3.   Edit it to point to 1 and 2 and nothing.

 

Juan

 

 

-----Original Message-----
From: Mulnick, Al [mailto:[EMAIL PROTECTED]
Sent: Monday, September 22, 2003 7:12 AM
To: '[EMAIL PROTECTED]'
Subject: RE: [ActiveDir] NTLDR Not Found

Which LUN is it targeting?  Sounds like your controller settings have changed.

-----Original Message-----
From: Juan Ibarra [mailto:[EMAIL PROTECTED]
Sent: Monday, September 22, 2003 9:22 AM
To: [EMAIL PROTECTED]
Subject: [ActiveDir] NTLDR Not Found

Good morning to all,
I just had a problem with one of my servers.  When rebooting I got a "NTLDR not Found" error message.  I've tried to copy the file following:

1.      Booted off the Win2k Server CD and copy the NTLDR file to the boot partition.  Didn't work
2.      Copy a boot.ini file from a floppy to it, didn't work.

What else?  Could it be the controller?  Before the ntldr I get a scsi devices not found.

Quite urgent so I would appreciate your input.

Thanks,
Juan