Hi Jim,
I came across that same solution a couple of days ago! (see
http://seer.support.veritas.com/docs/260097.htm
<http://seer.support.veritas.com/docs/260097.htm> for details) Like you, I was
stumped for quite a while. I think a real roadblock in my analysis of the problem is
that when the vsp.sys file was originally updated, it did not require a reboot, but
also consequently didn't take effect until the server was rebooted which was a couple
of weeks later for a security patch. So the cause/effect was not readily apparent.
That was on a Compaq 1750 that is our Veritas backup server. Unfortunately, I have a
Compaq 3000 that has the same problem that occurred at about the same time and it
doesn't run the Veritas software; other Compaq 3000's were not affected. So I am
still searching for that soluton.
Mike Thommes
-----Original Message-----
From: Jim Patton [mailto:[EMAIL PROTECTED]
Sent: Thu 11/6/2003 10:40 PM
To: [EMAIL PROTECTED]
Cc:
Subject: RE: [ActiveDir] Server Reboot problem after SP4 installation
I finally found the resolution to this problem. It came down to obtaining an
updated version of the Veritas driver, VSP.SYS.
Jim
List info : http://www.activedir.org/mail_list.htm
List FAQ : http://www.activedir.org/list_faq.htm
List archive: http://www.mail-archive.com/activedir%40mail.activedir.org/
