This is where Outlook 2003 in cached mode helps. By default it will always use the OAB.
Tony ---------- Original Message ---------------------------------- From: "Ken Cornetet" <[EMAIL PROTECTED]> Reply-To: [EMAIL PROTECTED] Date: Mon, 19 Jul 2004 09:41:11 -0500 Ouch, I hate to disagree with Joe, but we've "been there, done that". While it's true that the GC traffic volume pales in comparison to the Exchange traffic, the important metric here is not the bandwidth usage, but rather the end user experience. Your users will notice very pokey name resolution and GAL lookups if they are hitting a GC across a WAN. A T1 isn't bad, but a 128K link with moderately bad latency is absolutely painful! -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of joe Sent: Friday, July 16, 2004 4:43 PM To: [EMAIL PROTECTED] Subject: RE: [ActiveDir] outlook / gc client discovery I like to put this most simply as.... Use the GCs for the clients that the Exchange Servers are using. If you have an Exchange Server in your local site using a local GC, use that GC, would be silly to go across the WAN. However if your Exchange Server is across the WAN, use the GC across the WAN as well. Comparatively the traffic is nothing compared to Exchange AND you are less likely to be bitten by the "loosely consistent" nature of Active Directory. joe -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Mulnick, Al Sent: Wednesday, July 14, 2004 2:46 PM To: '[EMAIL PROTECTED]' Subject: RE: [ActiveDir] outlook / gc client discovery Sponsorship? I have no idea what you mean <g> "point taken about the size of the address book being small compared to but my mind has been that we have servers there with the required directory information, we might as well use them ???" Just because you can, doesn't mean you should. They are two totally different concepts to say the least. The address book lookups is typically very small. Although I currently enjoy large network links, that has not been the norm during my career. I've made similar recommendations when using 9.6 Kbps links, although that would arguably be a case for considering putting in a local Exchange server else use avian packet carrier or cached mode to at least give the illusion of usable performance. Generally speaking, wherever you put a site, you may also want to consider putting an Exchange server and GC's. They're not that different. If you instead decide to put the Exchange mailstores, where all the user data is located, in a central location, then why would it make sense to put the GC in a decentralized location? It's a nice to have, but it's not a requirement in most situations. It becomes more of a requirement depending on the links, but if you need to rely on it, you either have a geographically dispersed network and want more finite control over user traffic patterns (i.e. don't want the french mailbox users to have to use the south american GC for address book lookups)else you have a penchant for zeroing in on unimportant things. I'll assume the previous in your case because that would make a lot more sense. Bottom line is that there is no reason you wouldn't want to create a 5.5 - like topology if centralizing. You would create an active directory site, put in as many GC's as you needed for Exchange servers/users, and for each of those machines you'd hardcode the GC's DSProxy can hand out. Or maybe even create your own Exchange domain without users or your own domain forest depending on requirements. But to spend the time to reduce the smallest amount of traffic seems counterproductive to me except in situations noted above. My thoughts anyway. Al -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Graham Turner Sent: Wednesday, July 14, 2004 1:04 PM To: [EMAIL PROTECTED] Subject: Re: [ActiveDir] outlook / gc client discovery thanks both for post replies - helpful in the extreme i do sense that the issue of GC and by implication dlist etc retrieval over a WAN connection is not regarded as such as a major issue - can only assume that you have the luxury of very well connected sites ?? point taken about the size of the address book being small compared to but my mind has been that we have servers there with the required directory information, we might as well use them ??? i take point about risk about client not being "intelligent" in its choice of GC with respect to domainprep etc - suppose this is where Dsaccess has a bit more intelligence than the client based discovery process - which it seems we are not sure about will be doing some capturing of the startup of outlook clients so hopefully something will stick out here thanks again for your help i always wonder about the sponsorship owed by microsoft to this mailing list ?? GT - ----- Original Message ----- From: "Mulnick, Al" <[EMAIL PROTECTED]> To: <[EMAIL PROTECTED]> Sent: Monday, July 12, 2004 5:36 PM Subject: RE: [ActiveDir] outlook / gc client discovery > Graham, that's a fairly common question actually, although usually in > the Exchange groups. It still could be considered on topic here for > part of that data. > > FWIW, it's the dsproxy process that hands out GC's to clients to use. That's > because of the legacy restrictions the client brings to the equation > (see: > http://www.microsoft.com/technet/prodtechnol/exchange/2000/deploy/upgrad emig > rate/series/planningguide/p_08_tt1.mspx and search for DSProxy)Note > that different versions of Outlook will respond differently to this > process after > the first contact is made an a GC is found. DSProxy picks it's GC's > based on a number of criteria such as whether or not the domain it's > talking to is > domainprepped, how close to the Exchange machine the GC is (network), > etc. > > > In multi-domain environments, it's not always a good idea to use the > closestGC method (see: > http://support.microsoft.com/default.aspx?scid=kb;en-us;Q319206). > Rather, using a pre-defined becomes more usable as long as that GC > remains operational and up to date. Since that's against what Active > Directory can > do (multi-master concept) then it becomes a burden that many will > gripe about (and rightfully so on that one). For those situations, > recreating Exchange 5.5 with Exchange 2003/Active Directory seems to > be the best > workaround: i.e. creating a set of GC's specifically for Exchange usage. > This has the added benefit of dedicating GC's to Exchange (better > performance) and putting it under Exchange operational control > (environmentally isolated). Some would call that a detriment others a great > step forward, but all can agree it's just about a waste of hardware :) > > The problem is that the client doesn't send any site-awareness information. > Since Exchange 2003 can't take us back in time while still having to support > legacy clients (else many wouldn't buy the upgrade right?), you need > to work > with it to your environmental strengths IMHO. > > Why does it only maintain 10 of each? How many does it need? If 10 aren't > available, don't you have bigger problems to worry about? The q > article discusses your second question and gives details about the > behavior. Like I > said, be careful to note the versions and if you're spread out over > many sites with a centralized Exchange server, consider the recreation > of Exchange 5.5 functionality with regards to directory service. > > Al > > > -----Original Message----- > From: [EMAIL PROTECTED] > [mailto:[EMAIL PROTECTED] On Behalf Of Graham Turner > Sent: Monday, July 12, 2004 8:10 AM > To: [EMAIL PROTECTED] > Subject: [ActiveDir] outlook / gc client discovery > > dear all, am a bit nervous posting this on account of going way OT as > this post falls quite definitely under Outlook 2002 configuration, but > there is obviously relation to AD so here goes ... > > understanding the mechanisms of GC 'discovery' would it seem be very > important to optimal deployment of outlook / exchange especially in > remote office scenarios. > > the default outlook configuration seems to use the "view" of the AD topology > in terms of DC's and GC's as is learnt by DSACCESS - and reads this > from the > server on which the outlook client is homed > > qu 1. why does it only maintain 10 of each ??? - this is a bit like > that odd > limitation of 25 DC addresses in the WINS (1C) record - and which 10 > does it > learn ??? > > qu 2 seems we can override this default behaviour with a registry > value (closest GC) - does this reconfigure outlook to behave like the > logon server > discovery process and use native DNS lookups ??? > > hope the mail list can be of help on this one > > GT > > > List info : http://www.activedir.org/mail_list.htm > List FAQ : http://www.activedir.org/list_faq.htm > List archive: http://www.mail-archive.com/activedir%40mail.activedir.org/ > List info : http://www.activedir.org/mail_list.htm > List FAQ : http://www.activedir.org/list_faq.htm > List archive: > http://www.mail-archive.com/activedir%40mail.activedir.org/ > List info : http://www.activedir.org/mail_list.htm List FAQ : http://www.activedir.org/list_faq.htm List archive: http://www.mail-archive.com/activedir%40mail.activedir.org/ List info : http://www.activedir.org/mail_list.htm List FAQ : http://www.activedir.org/list_faq.htm List archive: http://www.mail-archive.com/activedir%40mail.activedir.org/ List info : http://www.activedir.org/mail_list.htm List FAQ : http://www.activedir.org/list_faq.htm List archive: http://www.mail-archive.com/activedir%40mail.activedir.org/ List info : http://www.activedir.org/mail_list.htm List FAQ : http://www.activedir.org/list_faq.htm List archive: http://www.mail-archive.com/activedir%40mail.activedir.org/ ________________________________________________________________ Sent via the WebMail system at mail.activedir.org List info : http://www.activedir.org/mail_list.htm List FAQ : http://www.activedir.org/list_faq.htm List archive: http://www.mail-archive.com/activedir%40mail.activedir.org/
