Eric,

This was more in reference to the resource hacker link that was posted. I
was presuming that rather than create a custom gina, people would simply
hack the resources on the standard one, in which case my points were valid.
You are correct of course, if the standard gina is replaced with a new one
(and the associated reg changes) then you should be ok (not withstanding
having a rollback plan).

Password filter dll's are a different kettle of fish, I've implemented them
on a number of occasions without strife.

Glenn

-----Original Message-----
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of Eric Fleischman
Sent: Sunday, 5 December 2004 1:02 PM
To: [EMAIL PROTECTED]; [EMAIL PROTECTED]
Subject: RE: [ActiveDir] Custom Password Filter DLL

I can't speak for the entire company, but I have debugged many custom
passfilt and gina issues before. Have you had problems? If so please let m
eknow, I'd be curious to hear what they were. You can ping me offline on
that if you would like.
 
I would point out that despite the fact that msgina.dll is upgraded during
hotfix/sp install at times, your ginadll reg value probably would not.
Therefore our upgrade of the gina would not be of great concern to you so
long as you don't depend upon something that changes in the internals of our
gina.
 
I can't recall seeing a hotfix or sp that overwrites the reg value if you
specify a custom gina, but if there was a time on that I'm sure someone will
step in and point it out. I just don't recall seeing it. :)
 
~Eric
 

________________________________

From: [EMAIL PROTECTED] on behalf of Glenn Corbett
Sent: Sat 12/4/2004 5:31 PM
To: [EMAIL PROTECTED]
Subject: RE: [ActiveDir] Custom Password Filter DLL



*shudder*

Don't forget however that if you go down this path, make sure you

A) Don't call Microsoft - they will laugh at you, charge your credit card,
then hang up
B) have a rollback plan to the standard GINA
C) remember that the gina will most likely be replaced during a service pack
(and sometimes) during hotfixes, so you may have to rehack and re-roll your
changes again
D) other vendors may replace / extend the gina (like smartcard / biometric
addons) which may not like you hacking the GINA (or put their own one in
which may negate your changes)

Apart from that, have fun

G.

________________________________

From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of Blair, James
Sent: Friday, 3 December 2004 12:29 PM
To: [EMAIL PROTECTED]
Subject: RE: [ActiveDir] Custom Password Filter DLL


http://www.users.on.net/johnson/resourcehacker/

________________________________

From: [EMAIL PROTECTED] on behalf of Santhosh Sivarajan
Sent: Fri 3/12/2004 11:13 AM
To: [EMAIL PROTECTED]
Subject: RE: [ActiveDir] Custom Password Filter DLL


Rhacker??  Where do I find that tool?

Matt Brown <[EMAIL PROTECTED]> wrote:

        You can use a program called Rhacker to modify the Gina, then rename
it, change the reg key and reboot.  All there is too it.

        

        We use it for our computer labs on campus to replace the Microsoft
logos with our own and to add an appropriate use alert.

        

        Thanks,

        --

        Matt Brown [EMAIL PROTECTED]
        Consultant for Student Technology Fee
        website: http://techfee.ewu.edu/
        +--------------------------------------+
        | 509.359.6972 ph. - 509.359.7087 fx
        | 307 MONROE HALL | Cheney, WA 99004
        +--------------------------------------+

        -----Original Message-----
        From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of Santhosh Sivarajan
        Sent: Thursday, December 02, 2004 3:01 PM
        To: [EMAIL PROTECTED]
        Subject: [ActiveDir] Custom Password Filter DLL

        

        Hi all,
       
        I am in a process of writing a custom password filter DLL.  I
modified
        the DLL and implemented it.  Password filter is working according
our
        requirements but my problem is, it is still displaying the default
        password complexity message (7 char, 24 history..etc etc).  Is there
anyway
        I can modify the display message without modifying the GINA?   I
found
        GINA source code on MSDN but it looks so complicated to me.  Any
        suggestions or recommendations?
       
        Thanks in advance!
        Sen



List info   : http://www.activedir.org/mail_list.htm
List FAQ    : http://www.activedir.org/list_faq.htm
List archive: http://www.mail-archive.com/activedir%40mail.activedir.org/


List info   : http://www.activedir.org/mail_list.htm
List FAQ    : http://www.activedir.org/list_faq.htm
List archive: http://www.mail-archive.com/activedir%40mail.activedir.org/


List info   : http://www.activedir.org/mail_list.htm
List FAQ    : http://www.activedir.org/list_faq.htm
List archive: http://www.mail-archive.com/activedir%40mail.activedir.org/

Reply via email to