Greetings, Just thought I would share what I discovered. I ended up using StringBeans Software to create an iSCSI target along with iSNS server 3.0 and the Microsoft iSCSI initiator 1.06. I now can mount a volume on our HP NAS box.
I am sure if I used a Hardware based product from FalconStore, Stonefly, Equalogic or Intransa it would have saved me some time in understanding the configuration, however this is only being used for a proof of concept test. Thanks again to everyone comments. Sincerely, Jose Medeiros Former Vice President and Postmaster NTEA MCP+I, MCSE, NT4 MCT www.ntea.net www.tvnug.org www.sfntug.org -------------------------------------------------- -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] Behalf Of Medeiros, Jose Sent: Tuesday, May 31, 2005 12:44 PM To: [ExchangeList]; [email protected] Subject: [ActiveDir] Microsoft ISCSI SNS Server and ISCSI Inatiotar for Microsoft Clusters Good Afternoon, I am trying to configure a HP 1200s NAS server appliance as an iSCSI Target server using Microsoft's iSNS server 3.0 along with a client server that we want to install Microsoft cluster server on that has the Microsoft iSCSI initiator 1.06. I having trouble configuring it, has any one done this yet? I am at a loss as to why I can not see the target server from a server that is running the ISCSI initiator. http://www.microsoft.com/downloads/details.aspx?familyid=12CB3C1A-15D6-4585-B385-BEFD1319F825&displaylang=en http://www.microsoft.com/downloads/details.aspx?FamilyID=0dbc4af5-9410-4080-a545-f90b45650e20&DisplayLang=en Thanks in advance. Jose Medeiros 408-449-6621 Cell List info : http://www.activedir.org/List.aspx List FAQ : http://www.activedir.org/ListFAQ.aspx List archive: http://www.mail-archive.com/activedir%40mail.activedir.org/ List info : http://www.activedir.org/List.aspx List FAQ : http://www.activedir.org/ListFAQ.aspx List archive: http://www.mail-archive.com/activedir%40mail.activedir.org/
