Re: [ActiveDir] OT: Ghost Imaging HP Proliant Servers..

[Phillip Partipilo]

Try adding the controller's dos aspi driver to the root directory of the ghost boot floppy then add a line to the config.sys "device=mydriver.sys" without quotes of course. That is a little weird though. If the scsi controller is properly grabbing int13 then its strange that ghost isn't seeing the raid. Phillip Partipilo Parametric Solutions Inc. Jupiter, Florida (561) 747-6107     ----- Original Message ----- From: Frank Abagnale To: Active Sent: Tuesday, July 19, 2005 6:12 AM Subject: [ActiveDir] OT: Ghost Imaging HP Proliant Servers.. Hi all,   Having read a few recent mails regarding server imaging, it's interesting to hear how 'easy' it has been for those who have responded. I have been having difficulties trying to create an image, I will explain further...   I have 10xHP Proliant 380's G4, to save time I thought I would configure one of the Proliant Servers (RAID 1 for OS), install a basic installation of Windows 2003 Standard, sysprep it then create a ghost image of this file so I could install the image on the remaining 9 Proliant Servers.   So I created a standard image, sysprep'd it then rebooted, I ran ghost and this is where the issue began, it did not recognise the disks (in RAID 1) for me to be able to ghost the drive, is there any docs or drivers or steps I have missed or need to look at?   I know my information is vague, but I tried this over a month ago so my memory is pretty poor.   Anyone with some advice where I should be looking? __________________________________________________ Do You Yahoo!? Tired of spam? Yahoo! Mail has the best spam protection around http://mail.yahoo.com