Hi all: I wanted to update the list on what actually fixed my problem. I ended up calling MS for support because I was at my breaking point :). Turns out that I needed to set my MTU manually to 1390! Doh! That did the trick. I knew it was some simple but I didn't know it was that simple :).
Thanks for all of your help!!!! Thank you for your time! Jennifer -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Jennifer Fountain Sent: Tuesday, August 09, 2005 5:54 PM To: [email protected] Subject: RE: [ActiveDir] Problem at remote site I ended up sending another Dc to the site so I could just readd this server to the domain but AD will not start on that box. I keep getting an error - rpc server unavailable. We have approx 9 DCs (4 at HQ and one at each remote site). We have dcs at our other remote sites (diagram below): Site1 Site2 Site3 (wan connection using private sprint network) -- HQ -- site6 (business cable modem with vpn tunnel to corporate (internet)) Site4 Site5 The new DC can ping but anything else gets a RPC server unavailable unavailable error. I thought AD could replicate over a modem connection? So, I am not sure where I need to go from here. Any thoughts? Thank you for your time! Jennifer ********************************************************************************* The information transmitted is intended only for the person or entity to which it is addressed and may contain confidential and/or privileged material. Any review, retransmission, dissemination or other use of, or taking of any action in reliance upon, this information by persons or entities other than the intended recipient is prohibited. If you received this in error, please contact the sender and delete the material from any computer List info : http://www.activedir.org/List.aspx List FAQ : http://www.activedir.org/ListFAQ.aspx List archive: http://www.mail-archive.com/activedir%40mail.activedir.org/
