And here's an article that covers the basics.
 
http://searchwin2000.techtarget.com/tip/1,289483,sid1_gci1086805,00.html?bucket=ETA)
 
I think Rick Kingslan has done a lot of work in this area, so you might want to ping him too.
 
Tony


From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Almeida Pinto, Jorge de
Sent: Wednesday, 26 October 2005 2:57 a.m.
To: [email protected]
Subject: RE: [ActiveDir] AD Lag Site

Hi,
Guido and Gil wrote a great ebook about recovery whereas information about lagsites is included
Take a look at: http://www.netpro.com/events/adrecovery/index.cfm (registration needed)
 
For starters some tips:
* Place at least on DC for each domain in the lag site
* Allow the DCs in the lag site to register only the replication record (CNAME) in the DNS zone _MSDCS.FORESTROOT
* Don't assign WINS server IP addresses for the DCs in the lag sites
* Make sure the site link between the lag site and the hub site has a higher cost than all other site links that connect the hub site and other sites (reason: Exchange AD topology discovery for the out-of-site list of DCs/GCs)
*You might want to use lag sites (e.g. 2) that replicate in steps (1st site replicates like each 3 days and the other each week) whereas the second lag site is connected to the first and the first is connected to the second and the hub site
 
This might be expensive though and you also might have a look at objectrecovery tools available by third party vendors
 
Cheers,
Jorge


From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Shawn Hayes
Sent: Tuesday, October 25, 2005 15:31
To: [email protected]
Subject: [ActiveDir] AD Lag Site

Anyone have any pointers (documentation or real life experience) on setting up an AD Lag Site?
 
Thanks in advance,
 
Shawn
 


This e-mail and any attachment is for authorised use by the intended recipient(s) only. It may contain proprietary material, confidential information and/or be subject to legal privilege. It should not be copied, disclosed to, retained or used by, any other party. If you are not an intended recipient then please promptly delete this e-mail and any attachment and all copies and inform the sender. Thank you.


This communication, including any attachments, is confidential.
If you are not the intended recipient, you should not read it -
please contact me immediately, destroy it, and do not copy or 
use any part of this communication or disclose anything about it.
Thank You.


Please note that this communication does not designate an information system for the purposes of the NZ Electronic Transactions Act 2002.
.

This e-mail message has been scanned for Viruses and Content and cleared by NetIQ MailMarshal at Gen-i


Reply via email to