|
Wook, I’d be interested in hearing
those situations. J From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On
Behalf Of Lee, Wook There are still situations in Windows 2003
where a single bridgehead can be configured even when there are multiple
available. Let me know if you’re curious. Wook From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]
On Behalf Of Bernard, Aric Keep in mind that this recommendation was specific
to Windows 2000. Windows 2003 automatically distributes links amongst
several DCs (if more than one exists) in a hub site. Also you can use the
ADLB to more formally balance the load amongst available DCs.
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On
Behalf Of Brian Desmond You can do it a couple ways: Have your network people split up the subnet your DCs at the hub are on
or move them to a dedicated subnet that’s easily broken down (e.g. a /24
can break to two /25s or four /26s). Or, create /32 subnets in AD for each
DC’s IP. Hub Site A has the /32 for the DC serving it and other DCs in
the site, and then the remote site subnets associated with it, same for the
other sites. FWIW I have >50 sites reporting into a very busy hub site and
there is no issue so far, and it just continues to get busier (My estimate is
about 20K PCs authenticate against the two DCs in the hub site in addition to
50 or so DCs replicating out every couple hours). CPU is 30% peak and NIC is
about 35mb/sec during the day on them. DL 380 G4s 4GB From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On
Behalf Of Adeel Ansari All, I have about a few hub sites with 100+ site
link. I found following from M$ website :
This condition can occur in large hub-and-spoke
deployments where most sites are branch sites that communicate with a
centralized hub site. If this condition exists and there are more than 20 site
links from the hub site to branch sites, the hub site can be divided into
multiple sites to provide additional bridgehead servers to handle the
replication volume. In a site, a single bridgehead server is active per domain.
If the site has more than 20 site links, the bridgehead servers can become
overloaded. Can someone please explain what steps do I need to
take to divide the hub sites? Regards, Adeel |
- RE: [ActiveDir] Site Link Question Lee, Wook
- RE: [ActiveDir] Site Link Question Marcus.Oh
