I am planning a move of our exchange servers and two domain controllers
out of our current single site to a new separate site. We had MS come in
and do a healthcheck on Exchange, and its one of their recommendations.
We don't have all the subnets in our network added into the current site
yet. Before I break out the netsh and AD cookbook scripts and go to the
lab I wanted to first see if there are simpler ways of doing this.
Question 1.
If I have say, 25 class C networks like 192.168.1.0/24 thru
192.168.25.0/24 in site 1. Can I put 192.168.0.0/16 under site 1 and it
work the same as explicitly defining the 25 separate subnets?
Question 2. The computers going to site 2 are part of a subnet in site 1
currently. Can I get away with adding individual computers to site 2
that are subset of a subnet defined in site 1?
Site 1 - 192.168.1.0/24
Site 2 - 192.168.1.10/32
192.168.1.11/32
192.168.1.12/32
192.168.1.13/32
Or do I need to move them into their own subnet for the separate site?
Thank you for any insight and/or recommendations you have.
Clyde Burns
Norton Healthcare
-----------------------------------------
This message is confidential, intended only for the named
recipient(s) and may contain information that is privileged or
exempt from disclosure under applicable law. Any patient health
information must be delivered immediately to intended recipient(s).
If you are not the intended recipient(s), you are notified that the
dissemination, distribution or copying of this message is strictly
prohibited. If you receive this message in error, or are not the
named recipient(s), please notify the sender at either the e-mail
address or telephone number above and discard this e-mail. Thank
you.
List info : http://www.activedir.org/List.aspx
List FAQ : http://www.activedir.org/ListFAQ.aspx
List archive: http://www.mail-archive.com/activedir%40mail.activedir.org/
