Now granted SBSland pales in comparison with you guys.. but I've SP1
everthing that moves around here as have many in our group... and not
seen issues...
First question I'd have is to ensure that you've also ensured that
you've checked any needed hardware updates... before I sp1'd I had to
ensure that the HP had the needed bios/driver updates in place.
Dell wouldn't support SP1 until June of last year (even though the SP
came out in March) as they too needed updates.
Those are in place, yes?
Thommes, Michael M. wrote:
This is the same issue I posted to this group on 5/25/06. We never
did figure out the cause. The local admins were rebuilding the
workstation in question yesterday since that seemed to be the most
expedient thing to do. I will be interested in future postings to
this thread.
Mike Thommes
------------------------------------------------------------------------
*From:* [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] *On Behalf Of *Clay,
Justin (ITS)
*Sent:* Friday, June 02, 2006 12:52 PM
*To:* [email protected]
*Subject:* RE: [ActiveDir] PCs hang at "Applying computer settings"
after upgradingDCs to 2K3 SP1
Hopefully the attachment comes through. The interesting part, and
where most of the time delay is seen is here:
USERENV(42c.2f0) 12:36:47:528 ProcessGPOs: Machine role is 2.
USERENV(42c.2f0) 12:37:50:606 MyGetUserName: GetUserNameEx failed
with 1753.
USERENV(42c.2f0) 12:37:50:606 MyGetUserName: Retrying call to
GetUserNameEx in 1/2 second.
USERENV(42c.2f0) 12:38:54:371 MyGetUserName: GetUserNameEx failed
with 1753.
USERENV(42c.2f0) 12:38:54:371 MyGetUserName: Retrying call to
GetUserNameEx in 1/2 second.
USERENV(42c.2f0) 12:39:58:027 MyGetUserName: GetUserNameEx failed
with 1753.
USERENV(42c.2f0) 12:39:58:027 MyGetUserName: Retrying call to
GetUserNameEx in 1/2 second.
USERENV(42c.2f0) 12:41:01:573 MyGetUserName: GetUserNameEx failed
with 1753.
USERENV(42c.2f0) 12:41:01:573 ProcessGPOs: MyGetUserName failed with 1753.
USERENV(42c.2f0) 12:41:01:573 ProcessGPOs: No WMI logging done in this
policy cycle.
USERENV(42c.2f0) 12:41:01:573 ProcessGPOs: Processing failed with
error 1753.
------------------------------------------------------------------------
*From:* [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] *On Behalf Of *Al Mulnick
*Sent:* Friday, June 02, 2006 12:19 PM
*To:* [email protected]
*Subject:* Re: [ActiveDir] PCs hang at "Applying computer settings"
after upgradingDCs to 2K3 SP1
I think a different thread mentioned that DNS was about 90% of the
cause of this type of behavior. It's not the only one however.
What keeps rebooting? The DC? Or the workstations? If the
workstations, not only ethereal but Darren's suggestion of logging is
a good idea.
On 6/2/06, *Za Vue* <[EMAIL PROTECTED] <mailto:[EMAIL PROTECTED]>> wrote:
Finally..someone is also experiencing this problem. My DCs are Windows
2003 SP1 also. It seems to hang every 3-4 reboots. My first thought
was DNS DNS.. but NetDiag, Repl, DCDiag, Nslookup all show no error.
Nothing is reported in logs. It is not firewall. I have play with
NetBIOS, changing Provider Order in Network Neighborhood->Advanced
Settings..nada.
This week has been quiet. If someone calls again I have ethereal setup
and ready to capture. The thing about my environment is I do not
manage the switches or router. I don't know if someone is messing with
something.
-Z.V.
, Justin (ITS) wrote:
Hello,
Last night we upgraded our 3 Win2K3 domain controllers to SP1. This
morning, we're getting tons and tons of calls from users who report
that their computer sits at "Applying computer settings" for a good 10
minutes, then another 10 or so minutes at "Applying your personalized
settings"
After the upgrade we did start seeing DCOM errors in the System event
log, which I've found many people online have experienced. I "fixed
it" (or at least the DCOM errors went away) by granting Network
Service the following rights:
Local Launch
Remote Launch
Local Activation
Remote Activation
In the Launch and Activation Permissions dialog on the Security tab of
the netman component. However, even after the DCOM errors have gone
away, we continue to see the same results on the clients.
Any ideas? I'm considering calling Premier Support, but I figured you
guys would be better help than them.
Thanks,
/Justin Clay/
/ITS Enterprise Services/
/Metropolitan Government of Nashville and Davidson County
Howard School Building/
/Phone: (615) 880-2573/
ITS ENTERPRISE SERVICES EMAIL NOTICE
The information contained in this email and any attachments is
confidential and may be subject to copyright or other intellectual
property protection. If you are not the intended recipient, you are
not authorized to use or disclose this information, and we request
that you notify us by reply mail or telephone and delete the original
message from your mail system.
ITS ENTERPRISE SERVICES EMAIL NOTICE
The information contained in this email and any attachments is
confidential and may be subject to copyright or other intellectual
property protection. If you are not the intended recipient, you are
not authorized to use or disclose this information, and we request
that you notify us by reply mail or telephone and delete the original
message from your mail system.
--
Letting your vendors set your risk analysis these days?
http://www.threatcode.com
The SBS product team wants to hear from you:
http://msmvps.com/blogs/bradley/archive/2006/05/18/95865.aspx
List info : http://www.activedir.org/List.aspx
List FAQ : http://www.activedir.org/ListFAQ.aspx
List archive: http://www.activedir.org/ml/threads.aspx
