Hi Mike,
Looks like you are going to also have dependencies on Wins and with the
MSDTC:
Exchange Server 2003 and Exchange 2000 Server require NetBIOS name
resolution for full functionality
http://support.microsoft.com/default.aspx?scid=kb;en-us;837391
How to configure Microsoft Distributed Transaction Coordinator on a Windows
Server 2003 cluster
http://support.microsoft.com/default.aspx?scid=kb;en-us;301600
Regards,
Jose :-)
--------------------------------------------------------------------
----- Original Message -----
From: Jose Medeiros
To: [email protected] ; [EMAIL PROTECTED]
Cc: [EMAIL PROTECTED]
Sent: Sunday, June 04, 2006 9:53 PM
Subject: Re: [ActiveDir] Change private IP on a cluster
Hi Mike,
I've only had to change a SQL 2000 Active / Active Cluster IP and it
involves some additional steps for SQL Virtual Names. It's been over 5 years
since I built an Exchange 2000 cluster, but I do not recall if Exchange has
any dependencies (I would probably post this to the Exchange list and I am
cc'ing them as well)
Take a look at :
Exchange Server 2003 Cluster Configuration Checklist
http://www.microsoft.com/technet/itsolutions/msit/operations/exchclustercklist.mspx?pf=true
Changing the IP address of network adapters in cluster server
http://support.microsoft.com/kb/230356/EN-US/
Or in PDF format at:
http://www.maned.com/support/knowledge_base/Roundhouse/Recommended_Reading/Q230356.pdf
Also just in case you ever have to change it on a SQL:
How to change the network IP addresses of SQL Server virtual servers
http://support.microsoft.com/kb/244980/en-us
Hope this helps,
Sincerely,
Jose Medeiros
MCP+I, MCSE, NT4 MCT
408-765-0437 Direct
408-449-6621 Cell
--------------------------------------------------------------------------------------------
----- Original Message -----
From: "Mike Newell" <[EMAIL PROTECTED]>
To: <[email protected]>
Sent: Sunday, June 04, 2006 12:53 PM
Subject: [ActiveDir] Change private IP on a cluster
Doh! Didn't mean to let this go without the OT:. Sorry.
________________________________
From: [EMAIL PROTECTED] on behalf of Mike Newell
Sent: Sun 6/4/2006 11:40 AM
To: [email protected]
Subject: [ActiveDir] Change private IP on a cluster
Hey,
I have an Exchange 2003 active/passive cluster on Windows 2003 and I need
to change the private ip on both nodes. I realize that while I'm
changing the IP the nodes will not talk to each other and likely kick
the passive node off or stop the cluster service for a few minutes on
the passive node.
Is there anything else I will need to do or look out for? I don't
*think* this is a big deal but since it's a production cluster, and I've
never had to do this, I thought I would check before I tried it.
Thanks again.
Mike.
List info : http://www.activedir.org/List.aspx
List FAQ : http://www.activedir.org/ListFAQ.aspx
List archive: http://www.activedir.org/ml/threads.aspx
