Dump the broadcoms and get Intel.
http://msmvps.com/blogs/bradley/archive/2007/01/04/the-following-network-cards-are-evil.aspx

We've had no end of weirdness with those suckers.
Even the latest drivers don't work.
Donavon Yelton wrote:
Yes, these are Broadcom NICs.  I want to go back to the last question
that was asked (if my network card drivers were up to date) and change
my answer.  I had ran the HP update package for the NC series cards in
the server and it showed as updated (even if I run it at the moment it
tells me that the drivers are up to date) with version 2.8.22.0.  The
problem is that when I look at the actual driver version by going to the
device manager and viewing properties it shows a version of 2.8.13.0.

On that note, in looking back at HP's revision history for their driver
for this card it has no mention of version 2.8.13.0 so is it possible
that this is the driver that came with Windows?  If so, how can I go
about getting rid of that driver and installing this new driver from HP.
Updating the driver and choosing the new driver explicitly doesn't work
and running HP's update package for the driver obviously fails to really
update the driver.

I can't say that this driver version is the root cause of the issue but
I do need the drivers updated to have a place to start from.

Susan, is there a known issue with Broadcom's that could possibly affect
the problem I'm having?  Thanks for the assistance!

Donavon

-----Original Message-----
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of Susan Bradley,
CPA aka Ebitz - SBS Rocks [MVP]
Sent: Monday, January 15, 2007 1:39 PM
To: ActiveDir@mail.activedir.org
Subject: Re: [ActiveDir] 1054 Error (Windows cannot contact DC - Group
Policy)

These aren't broadcom nics are they?

(Broadcoms are evil)

Darren Mar-Elia wrote:
Does this server have the same NIC driver as other servers? Or, have you tried updating this server's NIC driver?

-----Original Message-----
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of Donavon Yelton
Sent: Monday, January 15, 2007 10:11 AM
To: ActiveDir@mail.activedir.org
Subject: RE: [ActiveDir] 1054 Error (Windows cannot contact DC - Group
Policy)

This appears to be the only system on the network having this issue. I connected to another Windows 2003 Standard member server and did a gpupdate and then looked at the event log and it appears clean after the gpupdate command was ran. Slow link detection has not been disabled on that machine (or any on my network for that matter, with the exception of this new problem server now).

ICMP is not being blocked. Windows firewall is turned off on all servers on the network (including the two DC's and this problem member

server). To my knowledge there is nothing on the network limiting ICMP packet size. I certainly haven't done anything to limit it.

For an update on the current status of disabling slow link detection.
It has been roughly 30 minutes or so and no event log error shows after running gpupdate on the member server. When doing a gpresult everything appears to process correctly. This problem server is a new

terminal server and when I logon as a TS user to this computer it still shows a 1054 error and the same 59 errors in the userenv log file. The only exception is when I login as the network admin account through remote desktops (the account I made the registry edit for GroupPolicyMinTransferRate under).

Donavon

-----Original Message-----
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of Darren Mar-Elia
Sent: Monday, January 15, 2007 12:52 PM
To: ActiveDir@mail.activedir.org
Subject: RE: [ActiveDir] 1054 Error (Windows cannot contact DC - Group
Policy)

Is this the only system that is having this problem? Are you doing anything on your network to limit ICMP packet size?


-----Original Message-----
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of Donavon Yelton
Sent: Monday, January 15, 2007 9:39 AM
To: ActiveDir@mail.activedir.org
Subject: RE: [ActiveDir] 1054 Error (Windows cannot contact DC - Group
Policy)

In further testing today I did end up finding the location to add the GroupPolicyMinTransferRate DWORD value to the registry of the problem server. About 5 minutes ago I added that key with a value of 0 to HKLM and HKCU and when running a gpupdate I do not get the error and when looking at the userenv log I do not see the error 59 or any error

that it cannot contact the DC. I do not want to say that this is it for sure but for the moment it does appear to be working.

Now I suppose I should ask that since this was simply a troubleshooting step, what would I need to do in order to investigate a long-term solution to the problem? Thanks for all of the help!

Donavon

-----Original Message-----
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of Donavon Yelton
Sent: Monday, January 15, 2007 11:35 AM
To: ActiveDir@mail.activedir.org
Subject: RE: [ActiveDir] 1054 Error (Windows cannot contact DC - Group
Policy)

In addition to my last response I have noticed that when I reboot the problem server it will apparently apply the group policy without issues for 15 minutes or so and then will fail to do so from that point forward. When viewing the userenv log file after a reboot and after giving the gpupdate command, it shows no 59 errors and nothing shows up in the event log. Wait about 15 minutes or so and the event log shows the 1054 error and the userenv log shows the 59 error.

Donavon

-----Original Message-----
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of Donavon Yelton
Sent: Monday, January 15, 2007 10:44 AM
To: ActiveDir@mail.activedir.org
Subject: RE: [ActiveDir] 1054 Error (Windows cannot contact DC - Group
Policy)

Hi Steve,

When running nltest /dsgetdc:<domainname> on the problem member server

I get the following (NOTE: I ran it twice, once for DOMAIN and again for DOMAIN.LOCAL which is the full name. I noticed that the flags for

each are different):

C:\Documents and Settings\supervisor>nltest /dsgetdc:domain
           DC: \\ATHENA
      Address: \\192.168.1.6
     Dom Guid: 0c93e47c-f1a8-4e05-916c-d6e6670f2c96
     Dom Name: DOMAIN
  Forest Name: domain.local
Dc Site Name: Default-First-Site-Name Our Site Name: Default-First-Site-Name Flags: PDC GC DS LDAP KDC TIMESERV GTIMESERV WRITABLE DNS_FOREST CLOSE_S ITE The command completed successfully

C:\Documents and Settings\supervisor>nltest /dsgetdc:domain.local
           DC: \\athena.domain.local
      Address: \\192.168.1.6
     Dom Guid: 0c93e47c-f1a8-4e05-916c-d6e6670f2c96
     Dom Name: domain.local
  Forest Name: domain.local
Dc Site Name: Default-First-Site-Name Our Site Name: Default-First-Site-Name Flags: PDC GC DS LDAP KDC TIMESERV GTIMESERV WRITABLE DNS_DC DNS_DOMAIN DNS_FOREST CLOSE_SITE The command completed successfully




I have already tried to disable slow link detection on the problem member server however I had to do so by going into gpedit.msc and setting it to 0 as that registry location doesn't exist on Windows 2003 Server R2 x64 (when searching on Google I could not find the location of this key in this version of windows). Also of note is that I have went so far as forcing 100Mb connection on the active NIC on the problem member server but it also did not solve the issue so I set it back to auto. The NIC in the machine is a 1Gb card.

This morning I removed it from the domain and added it back. The group policy seemed to work for a bit but after about 15 minutes of tests I got the 1054 error again. Strangely if I do a gpupdate /force

I don't get the 1054 error in the event log and instead get a 1704 (Security policy in the Group policy objects has been applied
successfully).
Donavon

-----Original Message-----
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of Steve Linehan
Sent: Monday, January 15, 2007 10:20 AM
To: ActiveDir@mail.activedir.org
Subject: RE: [ActiveDir] 1054 Error (Windows cannot contact DC - Group
Policy)

It appears that you are having problems with slow link detection from the log below. You can try disabling it on the client to see if that corrects the problem by following the steps in this article for disabling slow link detection: http://support.microsoft.com/kb/910206/en-us. I would not recommend this as a long term solution but simply a troubleshooting step to see if it is indeed a problem with Slow link detection. I believe the LDAP error 59 later in the log is spurious and caused by the abortion of slow link detection. However just in case you can also validate that you can successfully make a DSGetDCName() call by using nltest /dsgetdc:<domainname> and see if it returns the same error on the machine in question? Let us know the results of each test an maybe we

can provide some additional insight.

Thanks,

-Steve
________________________________
From: [EMAIL PROTECTED]
[EMAIL PROTECTED] On Behalf Of Donavon Yelton [EMAIL PROTECTED]
Sent: Monday, January 15, 2007 6:37 AM
To: ActiveDir@mail.activedir.org
Subject: [ActiveDir] 1054 Error (Windows cannot contact DC - Group
Policy)

I have a new member server (Windows 2003 R2 x64) in my Windows 2003 domain (not R2). My setup contains two Windows 2003 DC's, both being DNS servers with the PDC being a WINS server. I have been working on a problem with a 1054 error in the event log for the mentioned Windows
2003 R2 x64 member server that has been added recently.

Error 1054 as a refresh is the following:


Windows cannot obtain the domain controller name for your computer network. (An unexpected network error occurred. ). Group Policy processing aborted.

I worked on solutions all day Friday to no avail so I am seeking assistance on this matter. No other member of the domain has this error that I am aware of. SRV records for the DC's are in the DNS and

is setup correctly on the troubled member server. I have looked through WINS and saw no apparent problems with its setup either. I have updated the drivers and firmware for the network cards in the new

member server and in both DC's.

I will say that I have a strange issue on my local PC from time to time (and I'll assume this happens on other domain member's PC's as well) where I cannot logon to Active Directory Users and Computers by using the domain as a locator, however I am able to go into it if I selectively choose a specific DC from the list.

When running netdiag on the problem member server I see no issues and when running netdiag and dcdiag on the DC's I see no issues. I am able to get to SYSVOL from the problem member server by going to \\domain\sysvol\domain<file://\\domain\sysvol\domain>.

I have turned on logging of USERENV on the problem member server and I

get this in the log:

USERENV(37c.66c) 07:00:02:294 PingComputer: PingBufferSize set as 2048
USERENV(37c.66c) 07:00:02:294 PingComputer: Adapter speed 1000000000 bps
USERENV(37c.66c) 07:00:02:294 PingComputer:  First time:  2482
USERENV(37c.66c) 07:00:02:294 PingComputer:  Second time:  2482
USERENV(37c.66c) 07:00:02:294 PingComputer: First and second times match.
USERENV(37c.66c) 07:00:02:294 PingComputer:  First time:  2482
USERENV(37c.66c) 07:00:02:294 PingComputer:  Second time:  2482
USERENV(37c.66c) 07:00:02:294 PingComputer: First and second times match.
USERENV(37c.66c) 07:00:02:294 PingComputer:  First time:  2482
USERENV(37c.66c) 07:00:02:294 PingComputer:  Second time:  2482
USERENV(37c.66c) 07:00:02:294 PingComputer: First and second times match.
USERENV(37c.66c) 07:00:02:294 PingComputer:  No data available
USERENV(37c.66c) 07:00:02:294 ProcessGPOs: DSGetDCName failed with 59.

I am very close to calling Microsoft to help resolve the issue but I thought I'd run it by you guys. I'm in the unfortunate position of being the only IT personnel here and having to be a jack of all trades

as it would be. I typically have no problem solving an issue like this, especially with the help of Google but this problem just goes beyond stumping me. Any help is appreciated.

Donavon Yelton
Manager of Information Systems
Carpenter Industries, Inc.
(704) 743-2068
http://www.dennis-carpenter.com<http://www.dennis-carpenter.com/>

________________________________
THIS MESSAGE CONTAINS INFORMATION INTENDED ONLY FOR THE USE OF THE INDIVIDUAL OR ENTITY NAMED ABOVE. IF THE READER OF THIS MESSAGE IS NOT

THE RECIPIENT, OR THE EMPLOYEE OR AGENT RESPONSIBLE TO DELIVER IT TO THE INTENDED RECIPIENT, YOU ARE HEREBY NOTIFIED THAT ANY DISSEMINATION, DISTRIBUTION OR COPYING OF THIS MESSAGE IS STRICTLY PROHIBITED. IF YOU HAVE RECEIVED THIS MESSAGE IN ERROR, PLEASE NOTIFY US IMMEDIATELY VIA RETURN-E-MAIL AND DELETE THIS MESSAGE FROM YOUR
SYSTEM. THANK YOU.
Carpenter Industries, Inc.
________________________________


List info   : http://www.activedir.org/List.aspx
List FAQ    : http://www.activedir.org/ListFAQ.aspx
List archive: http://www.activedir.org/ma/default.aspx
List info   : http://www.activedir.org/List.aspx
List FAQ    : http://www.activedir.org/ListFAQ.aspx
List archive: http://www.activedir.org/ma/default.aspx
List info   : http://www.activedir.org/List.aspx
List FAQ    : http://www.activedir.org/ListFAQ.aspx
List archive: http://www.activedir.org/ma/default.aspx
List info   : http://www.activedir.org/List.aspx
List FAQ    : http://www.activedir.org/ListFAQ.aspx
List archive: http://www.activedir.org/ma/default.aspx

List info   : http://www.activedir.org/List.aspx
List FAQ    : http://www.activedir.org/ListFAQ.aspx
List archive: http://www.activedir.org/ma/default.aspx
List info   : http://www.activedir.org/List.aspx
List FAQ    : http://www.activedir.org/ListFAQ.aspx
List archive: http://www.activedir.org/ma/default.aspx

List info   : http://www.activedir.org/List.aspx
List FAQ    : http://www.activedir.org/ListFAQ.aspx
List archive: http://www.activedir.org/ma/default.aspx


--
Letting your vendors set your risk analysis these days? http://www.threatcode.com

If you are a SBSer and you don't subscribe to the SBS Blog... man ... I
will hunt you down...
http://blogs.technet.com/sbs

List info   : http://www.activedir.org/List.aspx
List FAQ    : http://www.activedir.org/ListFAQ.aspx
List archive: http://www.activedir.org/ma/default.aspx
List info   : http://www.activedir.org/List.aspx
List FAQ    : http://www.activedir.org/ListFAQ.aspx
List archive: http://www.activedir.org/ma/default.aspx


--
Letting your vendors set your risk analysis these days? http://www.threatcode.com

If you are a SBSer and you don't subscribe to the SBS Blog... man ... I will 
hunt you down...
http://blogs.technet.com/sbs

List info   : http://www.activedir.org/List.aspx
List FAQ    : http://www.activedir.org/ListFAQ.aspx
List archive: http://www.activedir.org/ma/default.aspx

Reply via email to